Single Zircon LA-ICP-MS U-Pb Dating of the Guandimiao and Wawutang Granitic Plutons in Hunan, South China and Its Petrogenetic Significance

1 Introduction The South China Block (SCB), located between the Qinling-Dabie and Songma Indosinian sutures, experienced successively two important tectonic movements during the Mesozoic, i.e. the Indosinian movement (early Mesozoic) and the Yanshanian movement (late Mesozoic). Therefore, the generally accepted viewpoint is that the key geological problems during the Mesozoic are essentially the dynamics and material expression of these two tectonic movements in South China (Chen et al.…     

一种适用于粗匹配的遥感影像快速变化发现方法

针对遥感影像变化检测过程中影像间相对配准精度对检测结果影响大,易产生细碎图斑和错检冗余等问题,本文提出了一种基于感知哈希算法适用于粗匹配的遥感影像变化发现方法,以待检测影像的光谱信息和纹理特征信息共同作为检测特征集,以分割后的格网作为检测单元,采用基于感知哈希算法的影像相似度比对方法,计算格网内图像相似度,提取变化位置...     

基于遥感和GIS的哈尔滨城区热岛效应研究

本文利用遥感和GIS技术对LandsatETM 热红外遥感数据进行处理,反演市区的地面亮温,并进行正规化处理和等级划分,研究城市热岛的时空变化规律和温度场的空间分布规律,揭示城市热岛效应空间格局。通过对哈尔滨市区热岛效应分析,可以确定城区内热岛效应的分布及监测城市化进程,为城市热环境质量评价和热源调查提供准确、丰富的信息。     

NCEP温度图像与天体引潮力附加构造应力结合作地震短临预测初探——以2003年7-8月3次西藏地震为例

利用美国国家环境预测中心NCEP全球再分析资料的温度图像结合天体引潮力附加构造应力,对2003年5月以来的国内MS≥6.0、国外MS≥7.0的地震作了统计分析。以2004年7月12日—2004年8月25日间西藏地区3次地震为例得出如下认识:NCEP温度异常图像可以较好地反映短临地震构造活动时空演变过程;天体引潮力附加构造应力对地应力处于临界状态的活动断层具有明显的诱发作用;利用NCEP温度异常图像与天体引潮力附加构造应力结合进行地震短临预测是具有良好应用前景的新思路;西藏的3次地震均发生在天体引潮力附加构造应力周期相同的相位上,即天体引潮力附加构造应力变化达到相对稳定的峰值的末端,而不是发生在天体引潮力附加构造应力最大时刻,同时2003—2004年在西藏发生的其它震例中,地震发生在上述周期相同的相位,因此认为应当对其它区域更长时间更多的震例作这方面的进一步研究     

空地技术结合地形图测图方法研究

车载移动测量系统可以快速、高精度地对测区进行三维激光扫描,但是因地物遮挡、视角限制,使得点云数据存在缺失;无人机航测具有高效率、高灵活性和低成本等优势,但是稳定性差,受天气影像严重,易导致影像不清晰或精度低。无人机航测技术可以弥补车载移动测量技术的采集盲区,后者可以发挥高精度的优点,二者技术联合应用,将极大提高测绘精度及生产效率。本文以某小区为例,进行了相关方法实验,对建筑物顶部或植被茂密处等扫描盲区,采用无人机航测补测,通过高精度激光点云对航摄影像进行纠正匹配,综合利用激光点云与航摄影像进行大比例尺测图。     

Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.     

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).     

Tree species identification within an extensive forest area with diverse management regimes using airborne hyperspectral data

Information on tree species composition is crucial in forest management and can be obtained using remote sensing. While the topic has been addressed frequently over the last years, the remote sensing-based identification of tree species across wide and complex forest areas is still sparse in the literature. Our study presents a tree species classification of a large fraction of the Białowieża Forest in Poland covering 62 000 ha and being subject to diverse management regimes. Key objectives were to obtain an accurate tree species map and to examine if the prevalent management strategy influences the classification results. Tree species classification was conducted based on airborne hyperspectral HySpex data. We applied an iterative Support Vector Machine classification and obtained a thematic map of 7 individual tree species (birch, oak, hornbeam, lime, alder, pine, spruce) and an additional class containing other broadleaves. Generally, the more heterogeneous the area was, the more errors we observed in the classification results. Managed forests were classified more accurately than reserves. Our findings indicate that mapping dominant tree species with airborne hyperspectral data can be accomplished also over large areas and that forest management and its effects on forest structure has an influence on classification accuracies and should be actively considered when progressing towards operational mapping of tree species composition.     

中国热带6种海参骨片的种类和形态研究

利用扫描电子显微镜对我国6种热带海参(蛇目白尼参、玉足海参、花刺参、梅花参、子安辐肛参和巨梅花参)背脊部骨片的组成和结构进行了观察。结果表明,蛇目白尼参骨片有3种类型的花纹样体和1种杆状体;玉足海参骨片有2种类型的桌形体和1种扣形体;花刺参骨片有2种类型的桌形体、1种C形体和1种花纹样体;梅花参骨片有4种类型的杆状体;子安辐肛参骨片有1种花纹样体;巨梅花参骨片有1种杆状体、1种拟桌形体和1种颗粒体。结果显示,与之前学者光镜下观察的结果存在差异,玉足海参桌形体底盘中央是单孔而非4孔;花刺参桌形体立柱之间没有横梁连接。并发现了新的骨片类型:蛇目白尼参Ⅲ型花纹样体和杆状体;玉足海参顶部周缘小孔桌形体;花刺参顶部5簇小齿桌形体;梅花参Ⅱ型、Ⅲ型、Ⅳ型杆状体。     

湛江东海岛潮间带沉积物硫化物(AVS)和重金属(SEM)及其生物毒效性评估(英文)

对湛江东海岛潮间带表层沉积物中酸可挥发性硫化物(AVS)和同步提取重金属(SEM)的含量及其分布进行了研究。研究表明,东海岛潮间带表层沉积物中AVS含量夏季平均为0.449μ mol/g,冬季为1.816μ mol/g,大多数站位AVS含量冬季高于夏季;AVS平均含量总体呈南、北区较高,东、西区较低的区域分布规律。潮区沉积物可提取重金属SEM总量夏季在0.56μ mol/g~4.60μ mol/g之间,冬季处于0.65μ mol/g~2.21μ mol/g之间;各重金属平均含量大小为ZnCrPbCuCd,其中Cd含量占SEM总量不到1%,Zn含量则在70%以上,SEMZn是控制着SEM分布的主要模式。联合利用(∑SEM/AVS)与(∑SEM-AVS)法和生物毒性阈值法综合评估重金属对沉积环境的影响,东海岛潮间带大部分区域沉积物中(∑SEM-AVS)处于0~5之间,重金属潜在生物毒性较强的区域为通明海区(7号站和8号站所在),具有较强潜在生物毒性的重金属为夏季通明海区的Zn。