Variations in Melt Productivity and Melting Conditions along SWIR (70{degrees}E-49{degrees}E): Evidence from Olivine-hosted and Plagioclase-hosted Melt Inclusions

Melt inclusion and host glass compositions from the easternend of the Southwest Indian Ridge show a progressive depletionin light rare earth elements (LREE), Na₈ and (La/Sm)_n, but anincrease in Fe₈, from the NE (64°E) towards the SW (49°E).These changes indicate an increase in the degree of mantle meltingtowards the SW and correlate with a shallowing of the ridgeaxial depth and increase in crustal thickness. In addition,LREE enrichment in both melt inclusions and host glasses fromthe NE end of the ridge are compatible with re-fertilizationof a depleted mantle source. The large compositional variations(e.g. P₂O₅ and K₂O) of the melt inclusions from the NE end ofthe ridge (64°E), coupled with low Fe₈ values, suggest thatmelts from the NE correspond to a variety of different batchesof melts generated at shallow levels in the mantle melting column.In contrast, the progressively more depleted compositions andhigher Fe₈ values of the olivine- and plagioclase-hosted meltinclusions at the SW end of the studied region (49°E), suggestthat these melt inclusions represent batches of melt generatedby higher degrees of melting at greater mean depths in the mantlemelting column. Systematic differences in Fe₈ values betweenthe plagioclase- and the olivine-hosted melt inclusions in theSW end (49°E) of the studied ridge area, suggest that theplagioclase-hosted melt inclusions represent final batches ofmelt generated at the top of the mantle melting column, whereasthe olivine-hosted melt inclusions correspond to melts generatedfrom less depleted, more fertile mantle at greater depths. KEY WORDS: basalt; melt inclusions; olivine; plagioclase; Southwest Indian Ridge     

Geology and Metallogenesis of the Sawayaerdun Gold Deposit in the Southwestern Tianshan Mountains, Xinjiang, China

The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H₂O–NaCl and H₂O–CO₂–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm³, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H₂O–NaCl–CO₂–CH₄–N₂ system. The δ³⁴S_CDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ¹³C_PDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.     

流体包裹体在建立四川盆地古地温剖面研究中的应用

根据四川盆地沉积－埋藏史、主要地热事件、井下Ｒ０部面及钻井测温资料的综合分析,应用流体包裹体均一温度资料推算了四川盆地中部各地质时期地层的古地温,并建立了古地温梯度表,用此表可计算四川盆地各地期地层古地温。根据包裹体均一温度确定的古地温表明：四川盆地地层地温梯度由古至今逐渐降低,现今地温状况对古地温状况有明显的继承性。东吴运动（地裂运动）峨嵋山玄武岩大规模喷溢时期是盆地地温梯度最高时期,推算其地温     

The Meatiq dome (Eastern Desert, Egypt) a Precambrian metamorphic core complex: petrological and geological evidence

The Meatiq basement, which is exposed beneath late Proterozoic nappes of supracrustal rocks in the Central Eastern Desert of Egypt, was affected by three metamorphic events. The ophiolite cover nappes show only the last metamorphic overprint. The M1 metamorphic event (T ≥750 °C) is restricted to migmatized amphibolite xenoliths within the Um Ba′anib orthogneiss in the structurally lowest parts of the basement. Typical upper amphibolite facies M2 mineral assemblages include Grt–Zn-rich Spl–Qtz±Bt, Grt–Zn-rich Spl–Ms–Kfs–Bt–Sil–Qtz and locally kyanite in metasedimentary rocks. The mineral assemblages Ms–Qtz–Kfs–Sil in the matrix and Sil–Grt in garnet cores indicate that peak M2 P–T conditions exceeded muscovite and staurolite stabilities. Diffusional equilibration at M2 peak temperature conditions caused homogeneous chemical profiles across M2 garnets. Abundant staurolite in garnet rims and the matrix indicates a thorough equilibration during M2 at decreasing temperature conditions. M2 P–T conditions ranged from 610 to 690 °C at 6–8 kbar for the metamorphic peak and 530–600 °C at about 5.8 kbar for the retrograde stage. However, relic kyanite indicates pressures above 8 kbar, preceeding the temperature peak. A clockwise P–T path is indicated by abundant M2 sillimanite after relic kyanite and by andalusite after sillimanite. M2 fluid inclusions, trapped in quartz within garnet and in the quartz matrix show an array of isochores. Steepest isochores (water-rich H₂O-CO₂±CH₄/N₂ inclusions) pass through peak M2 P–T conditions and flatter isochores (CO₂-rich H₂O-CO₂±CH₄/N₂ inclusions) are interpreted to represent retrograde fluids which is consistent with a clockwise P–T path for M2. The M3 assemblage Grt–Chl in the uppermost metasedimentary sequence of the basement limits temperature to 460 to 550 °C. M3 temperature conditions within the ophiolite cover nappes are limited by the assemblage Atg–Trem–Tlc to<540 °C and the absence of crysotile to >350 °C. The polymetamorphic evolution in the basement contrasts with the monometamorphic ophiolite nappes. The M1 metamorphic event in the basement occurred prior to the intrusion of the Um Ba′anib granitoid at about 780 Ma. The prograde phase of the M2 metamorphic event took place during the collision of an island arc with a continent. The break-off of the subducting slab increased the temperature and resulted in the peak M2 mineral assemblages. During the rise of the basement domain retrograde M2 mineral assemblages were formed. The final M3 metamorphic event is associated with the updoming of the basement domain at about 580 Ma along low-angle normal faults.     

A study of melt inclusions at Vulcano (Aeolian Islands, Italy): insights on the primitive magmas and on the volcanic feeding system

 This work presents the results of a microthermometric and EPMA-SIMS study of melt inclusions in phenocrysts of rocks of the shoshonitic eruptive complex of Vulcano (Aeolian Islands, Italy). Different primitive magmas related to two different evolutionary series, an older one (50–25 ka) and a younger one (15 ka to 1890 A.D.), were identified as melt inclusions in olivine Fo_88–91 crystals. Both are characterized by high Ca/Al ratio and present very similar Rb/Sr, B/Be and patterns of trace elements, with Nb and Ti anomalies typical of a subduction zone. The two basalts present the same temperature of crystallization (1180±20  °C) and similar volatile abundances. The H₂O, S and Cl contents are relatively high, whereas magmatic CO₂ concentrations are very low, probably due to CO₂ loss before low-pressure crystallization and entrapment of melt inclusions. The mineral chemistry of the basaltic assemblages and the high Ca/Al ratio of melt inclusions indicate an origin from a depleted, metasomatized clinopyroxene-rich peridotitic mantle. The younger primitive melt is characterized with respect to the older one by higher K₂O and incompatible element abundances, by lower Zr/Nb and La/Nb, and by higher Ba/Rb and LREE enrichment. A different degree of partial melting of the same source can explain the chemical differences between the two magmas. However, some anomalies in Sr, Rb and K contents suggest either a slightly different source for the two magmas or differing extents of crustal contamination. Low-pressure degassing and cooling of the basaltic magmas produce shoshonitic liquids. The melt inclusions indicate evolutionary paths via fractional crystallization, leading to trachytic compositions during the older activity and to rhyolitic compositions during the recent one. The bulk-rock compositions record a more complex history than do the melt inclusions, due to the syneruptive mixing processes commonly affecting the magmas erupted at Vulcano. The composition and temperature data on melt inclusions suggest that in the older period of activity several shallow magmatic reservoirs existed; in the younger one a relatively homogeneous feeding system is active. The shallow magmatic reservoir feeding the recent eruptive activity probably has a vertical configuration, with basaltic magma in the deeper zones and differentiated magmas in shallower, low-volume, dike-like reservoirs. Received: 11 March 1998 / Accepted: 14 July 1998     

陕西金堆城斑岩钼矿床成矿流体研究

陕西金堆城斑岩钼矿床是中国最大的钼矿床之一,按照脉体相互切割关系,成矿过程可分为两期十个阶段。矿区内流体包裹体研究表明：成矿流体以富CO2为特征,温度介于83℃～142℃之间,盐度介于27.5～42.5wt％NaCl两个区间内,具有典型的双配分模式特征。氢氧同位素特征研究表明成矿物质主要来源于岩浆流体。晚阶段有大量雨水混入热液流体中,导致流体的温度、盐度和δ18OH2O、δD值下降,引起了成矿流体中的钼金属沉淀,形成了金堆城超大型斑岩钼矿床。     

Formation of diamond with mineral inclusions of “mixed” eclogite and peridotite paragenesis

Two unusual diamonds were studied from kimberlites from China, which contain both ultramafic and eclogitic mineral inclusions in the same diamond hosts. Diamond L32 contains seven Fe-rich garnets, four omphacites and one olivine inclusion. Four olivine, one sanidine and one coesite were recovered from diamond S32. Both garnet and omphacite inclusions have similar compositions as those from other localities of the world, and show basaltic bulk composition. All the garnet and omphacite inclusions in diamond L32 have positive Eu anomalies (Eu/Eu^*1.64 1.79). These observations support the proposal that mantle eclogite is the metamorphic product of subducted ancient oceanic crust. The Mg/(Mg + Fe) ratio of the olivine inclusions from the two diamonds (91-92) are evidently lower than the normal olivine inclusions in diamonds from the same kimberlite pipe (92-95). The following model is proposed for the formation of diamonds with “mixed” mineral inclusions. Ascending diamond-bearing eclogite (recycled oceanic crust) entrained in mantle plumes may experience extensive partial melting, whereas the ambient peridotite matrix remains subsolidus in the diamond stable field. This provides a mechanism for the transport of diamond from its original eclogitic host to an ultramafic one. Subsequent re-growth of diamond in the new environment makes it possible to capture mineral inclusions of different lithological suites. Partial melts of basaltic sources may interact with the surrounding peridotite, resulting in the relatively lower Mg/(Mg + Fe) ratios of the coexisting olivine inclusions from the studied diamonds. Diamonds with “mixed” mineral inclusions demonstrate that plume activity also occurred in the Archean cratons.     

Genesis of tin and tantalum mineralization in pegmatites from the Bynoe area,Pine Creek Geosyncline,Northern Territory

The tin‐ and tantalum‐bearing pegmatites of the Bynoe area are located in the western Pine Creek Geosyncline. They are emplaced within psammopelitic rocks in the contact aureole of the Two Sisters Granite. The latter is a Palaeoproterozoic, fractionated, granite with S‐type characteristics and comprises a syn‐ to late‐orogenic, variably foliated, medium‐grained biotite granite and a post‐orogenic, coarse‐grained biotite‐muscovite granite. The pegmatites comprise a border zone of fine grained muscovite + quartz followed inward by a wall zone of coarse grained muscovite + quartz which is in turn followed by an intermediate zone of quartz + feldspar + muscovite. A core zone of massive quartz is present in some occurrences. Feldspars in the intermediate zone are almost completely altered to kaolinite. This zone contains the bulk of cassiterite, tantalite and columbite mineralization. Fluid inclusions in pegmatitic quartz indicate that early Type A (CO₂ + H₂O ± CH₄) inclusions were trapped at the H₂O‐CO₂ solvus at P～100 MPa, T～300°C (range 240–328°C) and salinity ～6 wt% eq NaCl. Pressure‐salinity corrected temperatures on Type B (H₂O + ～20% vapour), C (H₂O + < 15% vapour) and D (H₂O + halite + vapour) inclusions also fall within the range of Type A inclusions. Oxygen and hydrogen isotope data show that kaolin was either formed in isotopic equilibrium with meteoric waters or subsequent to its formation, from hydrothermal fluid, underwent isotopic exchange with meteoric waters. Fluid inclusion waters from core zone quartz show enrichment in deuterium suggesting metamorphic influence. Isotope values on muscovite are consistent with a magmatic origin. It is suggested that the pegmatites were derived from the post‐orogenic phase of the Two Sisters Granite. Precipitation of cassiterite took place at about 300°C from an aqueous fluid largely as a result of increase in pH due to feldspar alteration.     

内蒙古绥和查干地区多金属矿床流体包裹体研究

内蒙古绥和查干铜铅锌多金属矿床是典型的热液矿床,处于大兴安岭成矿带南段、内蒙古二连-东乌旗铁铜钼多金属成矿远景区。该文对矿床中流体包裹体进行研究,结果发现,矿床划分为2个成矿期次:早阶段属中高温(320~380℃);晚阶段属中低温(140~160℃)。包裹体的捕获温度也存在2个高峰期,矿床属于中—高温热液矿床。盐度也存在2个高峰范围,第一个高峰范围在0~4%之间;第二个高峰范围在5%~9.6%之间。流体压力范围介于22.6~101.4 MPa,均值为59.9 MPa,成矿的平均深度为当时地表以下1.95 km,属中深成矿床,成矿流体具有中—高温至中—低盐度性质。2个成矿期次和矿区的2次构造运动相对应,矿体定位受断裂构造控制,属于典型的断控脉状矿床。     

吉尔吉斯斯坦布丘克造山型金矿床：来自流体包裹体、H- O- S同位素证据

吉尔吉斯斯坦北天山构造带的矿床学数据缺乏,制约了天山造山带境内外成矿对比。布丘克金矿床位于吉尔吉斯斯坦北天山构造带中部。金矿体为石英复脉,呈带状发育于NWW向韧性剪切带中。矿体倾向SSW,倾角60°～70°,赋矿围岩主要为侵入于早古生代变质碎屑杂岩中的正长斑岩。布丘克金矿床成矿期石英流体包裹体观察、石英H-O同位素、硫化物S同位素测试结果显示,布丘克金矿床石英脉中包裹体大小集中在2～10μm之间,类型以H₂O-CO₂型、富CO₂型、水溶液型包裹体为主,成分以富CO₂、含CH₄为特征。成矿流体具有中温(200～320℃)、低盐度(3%～7%NaCl_eqv)特征;石英δD_V-SMOW值介于-108.1‰～-90.2‰之间,δ¹⁸O_流体值介于4.86‰～9.26‰之间;黄铁矿δ³⁴S分布在0‰左右(-0.9‰～1.6‰)。综合本文数据、矿床地质特征、区域地质资料,本文认为布丘...