Hydrothermal fluid geochemistry at the Chah-Firuzeh porphyry copper deposit,Iran: Evidence from fluid inclusions

The Chah-Firuzeh porphyry copper deposit is located in 35 km north of Shahre Babak (Kerman province). It is associated with granodioriteic intrusive of Miocene age which intruded Eocene volcanosedimentary rocks. Copper mineralization was accompanied by both potassic and phyllic alteration. Field observations and petrographic studies demonstrate that the emplacement of Chah-Firuzeh pluton took place in several intrusive pulses, each with associated hydrothermal ore fluid formation that was also associated with hydrostatic pressure increasing respect to that of lithostatic pressure (and fracturing development-relative boiling) by circulated fluid. Copper is concentrated as a very early hydrothermal mineralized phase in the evolution of the hydrothermal system. Early hydrothermal alteration produced a potassic assemblage (orthoclase–biotite) in the central deep part of the stock. Alteration ore fluids could be classify into two groups of liquid-reach, containing solid phases, high temperature (390 to 500 °C) high salinity (more than 60 wt.% NaCl equiv.) and gas-rich, high temperature (311 to 570 °C), no solid phase and with low salinities. These magmatic source fluids illustrate sever boiling process and also are the responsible for the both potassic alteration, quartz group I and II veins and chalcopyrite deposition. Propylitic alteration occurred by the liquid-rich, low temperature (241 to 390 °C) and Ca-rich fluid with meteoric origin. Continuous decreasing temperature let the meteoric water diffusion into the system, mixed with magmatic fluids and descending the salinities down to the 1 wt.% NaCl equiv. and leaching the Cu from vein groups II and III by sever thermodynamic anarchies from potassic to the phyllic alteration zones. Phyllic alteration and copper leaching resulted from the inflow of oxidized and acidic meteoric waters with decreasing temperature of the system followed by the incursion of this fluid into and its convection in upper part of the system. A late episode of boiling occurred in the apical the phyllic zone, and was associated with significant copper deposition. Based on the field observation on sharp alteration and related mineralization, it is possible to conclude that all these procedures have been controlled by local faults that could be active even before the pluton injection. These faults and the new form ones (which have been formed after injection), could crash the hosted rocks, and act as physical dams to restrict and limit the mineralization in special strikes and zones within the Cah-Firuzeh ore deposit.     

蚌埠五河地区金矿床成矿物质来源及其年代学研究——以河口和荣渡金矿床为例

安徽省蚌埠五河地区河口和荣渡金矿床是华北地台东南缘蚌埠台隆和五河台坳邻接区域的两个金矿床。本文通过对比研究河口和荣渡金矿床的地质特征、流体包裹体地球化学、Re-Os同位素以及H-O-S同位素特征,来厘定其形成时代、探讨其成矿物质来源和成矿过程。河口及荣渡金矿床矿体主要呈细脉浸染状、脉状和网脉状赋存于古太古代西堌堆地层中,成矿过程可划分为4个阶段:(1)石英脉阶段(早阶段);(2)石英-黄铁矿阶段(早阶段);(3)石英-多金属硫化物阶段(中阶段);(4)碳酸盐阶段(晚阶段);其中,中阶段为金的主要矿化时期。河口和荣渡金矿床早阶段(石英脉和石英-黄铁矿阶段)的石英内发育富液两相包裹体(WL型)、富气两相包裹体(WG)以及少量的含子晶的气液固三相包裹体(S型),均一温度为322～412℃,盐度介于5. 56%～15. 67%NaCleqv之间,属于高温中低盐度流体体系;中阶段(石英-多金属硫化物脉阶段)石英内发育有富液两相包裹体(WL型)、富气两相包裹体(WG),均一温度为257～357℃,盐度介于3. 06%～7. 45%NaCleqv之间,属于中高温低盐度流体体系。从成矿早阶段到主成矿阶段流体的盐度和温度都发生了较大程度的降低,推测矿化过程可能是由流体温度和盐度的降低引起的。成矿阶段石英中流体水的δ~(18)O值介于5. 01‰～7. 90‰之间,δD_(V-SMOW)值介于-89‰～-65‰之间,表明两个矿床的成矿流体为主要为岩浆水。河口金矿床矿石中的黄铁矿δ~(34)S值介于3. 89‰～9. 65‰之间,荣渡金矿床方铅矿δ~(34)S值为0. 76‰,表明河口及荣渡金矿床δ~(34)S值具有岩浆硫的特征,后期由于岩浆去气作用或地层硫的参与使矿石中的δ~(34)S值升高。因此,这两个金矿床可能是与岩浆热液有关的热液石英脉型金矿床。对荣渡金矿床矿石的黄铁矿进行Re-Os同位素定年,确定金矿床形成于134±19Ma,结合前人对该地区所做的岩浆岩定年工作,推测荣渡金矿床的成矿可能与区内130Ma左右的岩浆活动密切相关。     

Fluid Characteristics and Evolution of the Zhawulong Granitic Pegmatite Lithium Deposit in the Ganzi‐Songpan Region,Southwestern China

The Zhawulong granitic pegmatite lithium deposit is located in the Ganzi-Songpan orogenic belt. Fluid inclusions in spodumene and coexisting quartz were studied to understand the cooling path and evolution of fluid within albite–spodumene pegmatite. There are three distinguishable types of fluid inclusions: crystal-rich, CO2–NaCl–H2O, and NaCl–H2O. At more than 500°C and 350~480 MPa, crystal-rich fluid inclusions were captured during the pegmatitic magma-hydrothermal transition stage, characterized by a dense hydrous alkali borosilicate fluid with a carbonate component. Between 412°C and 278°C, CO2–NaCl–H2Ofluid inclusions developed in spodumene (I) and quartz (II) with a low salinity (3.3–11.9 wt%NaCl equivalent) and a high volatile content, which represent the boundary between the transition stage and the hydrothermal stage. The subsequentNaCl–H2Ofluid inclusions from the hydrothermal stage, between 189°C and 302°C, have a low salinity (1.1–13.9 wt%NaCl equivalent). The various types of fluid inclusions reveal the P–T conditions of pegmatite formation, which marks the transition process from magmatic to hydrothermal. The ore-forming fluids from the Zhawulong deposit have many of the same characteristics as those from the Jiajika lithium deposit. The ore-forming fluid provided not only materials for crystallization of rare metal minerals, such as spodumene and beryl, but also the ideal conditions forthe growth of ore minerals. Therefore, this area has favorable conditions for lithium enrichment and excellent prospecting potential.     

云南荒田大型铅锌矿床的成因:流体包裹体和C- H- O- S- Pb同位素地球化学约束

荒田铅锌矿位于扬子板块西南缘,与华夏地块和三江地块相接,属峨眉山大火成岩省的南延部分,川-滇-黔铅锌银多金属成矿域的南部。矿体赋存于上二叠统峨眉山玄武岩底部与下二叠统茅口组接触面上及其附近的玄武质-灰质角砾岩层中。本文应用流体包裹体和C-H-O-S-Pb同位素地球化学研究手段,来探讨荒田铅锌矿的成因。流体包裹体分析表明,成矿流体性质具有阶段性演化特征,早期硫化物阶段(阶段Ⅰ)出现含子矿物包裹体、CO_2包裹体和H_2O包裹体的组合发育特征,均一温度介于245～320℃,平均为270℃;到中期硫化物阶段(阶段Ⅱ)和晚期硫化物阶段(阶段Ⅲ)则逐渐变为以H_2O包裹体为主要类型,均一温度分别介于180～250℃和100～210℃,平均为224℃和174℃。随着成矿作用的进行,成矿流体的均一温度和盐度均表现出从早阶段到晚阶段逐渐降低的趋势。显微激光拉曼光谱分析显示流体包裹体的液相成分主要为H_2O,气相成分为H_2O、CO_2、CH_4以及N_2。碳、氧同位素组成(δ~(13)C_(PDB)值介于-8.54‰～3.76‰,δ~(18)O_(SMOW)值介于8.57‰～24.22‰)在δ~(18)O-δ~(13)C图上分布于原生碳酸岩和海相碳酸盐岩之间,指示CO_2可能来自地幔、海相沉积碳酸盐岩溶解和沉积物中有机质的脱羟基作用。氢氧同位素组成(δD值介于-97.4‰～-71.4‰,δ~(18)O_水值介于-4.6‰～8.0‰)在δD-δ~(18)O图上落在岩浆水和大气降水的过渡带上,推测热液流体运移过程中与顺层下渗的大气降水流体混合,期间可能有海水的加入。矿石硫化物的δ~(34)S值介于-5.5‰～10.3‰,指示矿化剂硫具有多种来源,除了直接来自玄武岩外,还来自古海水硫酸盐和碳酸盐岩地层,硫酸盐通过热化学还原(TSR)过程发生还原作用。矿石硫化物铅的~(208)Pb/~(204)Pb、~(207)Pb/~(204)Pb和~(206)Pb/~(204)Pb比值分别为38.320～39.365、15.603～15.860和18.136～18.786,数据分布呈线性趋势,几乎所有点均落在地壳铅平均演化线以上,且位于峨眉山组玄武岩、碳酸盐岩地层和基底岩石的Pb同位素组成范围之内,说明成矿物质具有多源性,铅同位素在成矿之前存在均一化过程。结合成矿物质和成矿流体来源,以及区域成矿地球动力学背景,认为荒田铅锌矿属于密西西比河谷型(MVT)叠加岩浆热液改造型矿床。     

Mineralogy,Fluid Inclusions,and Sulfur Isotopes of the Huanzala Deposits,Peru: Early Skarn and Late Polymetallic Replacement Style Mineralizations

Carbonate‐replacement polymetallic mineralization at the Huanzala deposits (9°51′S, 77°00′W) was conducted in two contrasting stages that occurred in almost the same location. Early‐stage mineralization has a relation with a granodiorite porphyry stock, whereas the late‐stage mineralization is genetically associated with quartz porphyry sills. The early stage involved low to intermediate sulfidation Cu–Zn–(Pb) mineralization associated with metasomatic skarn, and the late stage involved high to intermediate sulfidation Cu–Zn–Pb–(Mn) mineralization associated with hydrothermal alteration characterized by paragonitic sericitization. The orebodies are hosted by steeply dipping (approximately 60°NE) Lower Cretaceous carbonate rocks in a relatively narrow range of approximately 4 km in horizontal extent and less than 1 km in depth. The pathway of the early‐stage brine‐derived fluids (300–>400°C, >33 wt% NaCl equivalent) along a plot of log against 1000/T is best explained by the progressive dual decline of the value and the temperature under rock‐buffering conditions; this decline saw the pathway progress through the stability field of pyrrhotite to reach that of pyrite and promoted a decrease in FeS from 14.5 to 1.6 mol% in the sphalerite. In contrast, an explanation for the pathway of the late‐stage fluids (140–290°C, 3–13 wt% NaCl equivalent) is given by an almost isothermal decline at approximately 270°C, with passing through the stability field of pyrite–bornite to reach that of chalcopyrite, promoting an increase in FeS from 0.1 to 1.6 mol% in the sphalerite, suggesting gas‐buffering conditions. The ore formation pressure records in the fluid inclusions illustrate an approximately 2‐km erosion during the roughly 2‐Myr total lifetime of the hydrothermal system.     

华北克拉通北缘柴胡栏子金矿富甲烷流体包裹体的发现及地质意义

柴胡栏子金矿位于华北克拉通北缘赤峰-朝阳金矿集区西段,是区内典型的石英脉型为主的金矿床,也是赤峰-朝阳地区首次发现的含大量单相甲烷包裹体群的金矿床.矿体呈脉状产于太古宙建平群大营子组下岩段含石墨绢云母片岩切层断裂中,金主要产出在蚀变含石墨绢云母片岩和石英脉中.根据野外观察和包裹体测温结果,将柴胡栏子金矿流体成矿过程划分...     

八庙-青山金红石矿床地球化学特征

金红石矿床含矿岩石常量元素总体上与玄武岩接近,但以低硅,高钛,高ＣＯ２,高碱度为特征。矿床微量元素与地壳的差别显著,稀土元素较高,分布模式呈轻稀土富集型,Ｅｕ一般为正常型与碧玄岩最接近,Ｔｉ与Ｂａ,Ｃｏ,Ｐｂ,Ｓｒ,Ｔｈ,Ｖ,Ｙ及稀土元素呈正相关与Ｃｒ和Ｎｉ呈负相关,δ＾３４Ｓ多数与（超）铁镁质岩石接近,最大值小于且靠近现代海水。     

浙江新昌地幔岩捕虏体中的硫化物包裹体初步研究

浙江新昌一带晚第三纪碱性玄武岩中地幔岩（二辉橄榄岩）捕虏体内存在大量硫化物熔体包裹体。电子探针分析表明,硫化物相成分主要为镍黄铁矿,次为磁共铁矿。硫化物包裹体的Ｎｉ／Ｆｅ值与寄主地幔岩的橄榄石含量呈正相关。同一包裹体的硫化物相成分不均一,自中心至边缘硫化物的Ｎｉ／Ｆｅ、（Ｆｅ＋Ｎｉ）／Ｓ值和Ｎｉ呈均呈增加趋势。通过与中国汉诺坝、德国ＷｅｓｔＥｉｆｅｌ东欧Ｎｏｇｒａｄ－Ｇｏｍｏｒ地区资料的综合分析,     

热液脉型铅-锌-银矿床富铁闪锌矿中硫化物包裹体成因探讨

通过对热液脉型的铅－锌－银矿床（３个）和银矿床（１个）和闪锌矿中硫化物包囊体的特征研究表明,石英－硫化物阶段富铁闪锌矿（主矿物）的硫化物包裹体十分发育：沿生长带产出的乳滴状黄铜矿与主矿物为共同沉淀成因;沿穿切主矿物的黄铜矿或石英细脉两侧,和受粗粒黄铜矿溶蚀的富铁闪锌矿近接触部位发育的乳滴状黄铜矿为渗透－交代产物;沿解理（裂隙）或粒间、粒内产出的各种形态磁黄铁矿是充填－交代的结果;沿解理分布的脉状毒     

Combining machine learning techniques,microanalyses and large geochemical datasets for tephrochronological studies in complex volcanic areas: New age constraints for the Pleistocene magmatism of central Italy

Characterization, correlation and provenance determination of tephra samples in sedimentary sections (tephrochronological studies) are powerful tools for establishing ages of depositional events, volcanic eruptions, and tephra dispersion. Despite the large literature and the advancements in this research field, the univocal attribution of tephra deposits to specific volcanic sources remains too often elusive. In this contribution, we test the application of a machine learning technique named Support Vector Machine to attempt shedding new light upon tephra deposits related to one of the most complex and debated volcanic regions on Earth: the Pliocene-Pleistocene magmatism in Italy. The machine learning algorithm was trained using one of the most comprehensive global petrological databases (GEOROC); 17 chemical elements including major (SiO₂, TiO₂, Al₂O₃, Fe₂O_3T, CaO, MgO, MnO, Na₂O, K₂O, P₂O₅) and selected trace (Sr, Ba, Rb, Zr, Nb, La, Ce) elements were chosen as input parameters. We first show the ability of support vector machines in discriminating among different Pliocene-Pleistocene volcanic provinces in Italy and then apply the same methodology to determine the volcanic source of tephra samples occurring in the Caio outcrop, an Early Pleistocene sedimentary section located in Central Italy. Our results show that: 1) support vector machines can successfully resolve high-dimensional tephrochronological problems overcoming the intrinsic limitation of two- and three-dimensional discrimination diagrams; 2) support vector machines can discriminate among different volcanic provinces in complex magmatic regions; 3) in the specific case study, support vector machines indicate that the most probable source for the investigated tephra samples is the so-called Roman Magmatic Province. These results have strong geochronological and geodynamical implications suggesting new age constraints (1.4 Ma instead of 0.8 Ma) for the starting of the volcanic activity in the Roman Magmatic Province.