窑洞外形特征对结构抗震性能影响研究

调查发现山西北部农村地区农居窑洞多是独立式土坯窑洞,结构主要受力体系是土坯砌体砌筑拱结构,其建造无统一标准,外形样式存在差异。由于拱结构的内力分布对外形尺寸变化比较敏感,为研究窑洞外形特征对结构抗震性能影响,建立相应的有限元模型进行计算分析,对比不同外形特征窑洞在地震作用下的损伤情况,并结合历史震害,指出窑洞结构的薄弱位置。研究结果表明覆土较厚的窑洞容易损伤,连拱孔数较多窑洞的两侧位置更容易发生破坏,拱的曲线形状对结构抗震性能有一定影响,合理拱曲线窑洞的抗震性能优于一般形状窑洞。     

福建仙游震群序列发震构造分析研究

福建仙游地区自2010年8月开始出现地震序列活动,2012年地震活动水平有所提高,2013年以来地震活动水平进一步提高,ML3.0以上地震集中活跃。福建数字化地震台网对这些地震进行了较完整的监测,记录到丰富的观测资料。通过利用P、S波到时数据对ML≥1.0地震序列进行重新定位,发现地震序列空间位置和震源深度呈现出不同的时段性分布特征。同时利用福建数字化地震台网记录到的波形资料,采用"剪切-粘贴"法,获取了ML≥3.5的震源机制解和最佳震源深度。通过震群序列活动特征、震源位置分布、震源区断层活动分布以及震源机制解特征综合判断认为:仙游震群序列为库水下渗促使断裂滑动引起的构造地震,属于水库诱发型构造型地震,发震构造为穿过库区的NW向石苍断裂。     

Modeling RC column flexural failure modes under intensive seismic loading

The aim of this work is to model beam‐column behavior in a computationally effective manner, revealing reliably the overall response of reinforced concrete members subjected to intensive seismic loading. In this respect, plasticity and damage are considered in the predominant longitudinal direction, allowing for fiber finite element modeling, while in addition the effect of inelastic buckling of longitudinal rebars, which becomes essential at later stages of intensive cyclic loading, is incorporated. Α smooth plasticity‐damage model is developed for concrete, accounting for unilateral compressive and tensile behavior, nonlinear unloading and crack closure phenomena. This is used to address concrete core crushing and spalling, which triggers the inelastic buckling of longitudinal rebars. For this reason, a uniaxial local stress‐strain constitutive relation for steel rebars is developed, which is based on a combined nonlinear kinematic and isotropic hardening law. The proposed constitutive model is validated on the basis of existing experimental data and the formulation of the buckling model for a single rebar is developed. The cross section of rebar is discretized into fibers, each one following the derived stress‐strain uniaxial law. The buckling curve is determined analytically, while equilibrium is imposed at the deformed configuration. The proposed models for concrete and rebars are embedded into a properly adjusted fiber beam‐column element of reinforced concrete members and the proposed formulation is verified with existing experimental data under intensive cyclic loading.     

陕西地区小微震震源机制研究

小微震事件的震源机制是区域应力场及诸多地球动力学研究的基础资料。陕西地区为多个地震带的交汇区,近些年积累了丰富的小微震波形资料。运用新近发展的适用于求解小微震震源机制的广义极性振幅技术(GPAT),结合陕西2015地壳速度模型,求解陕西测震台网2011年4月至2015年12月间记录的121次ML1.5~3.5事件的震源机制。反演结果表明:(1)以上事件的震源机制大部分为走滑及正断类型,其比例占64.5%;逆断型机制占22.3%。(2)反演震源机制得到的震源深度与定位深度具有良好的一致性;矩震级与近震震级间存在差别,且这种差别随事件的变小而增大。(3)对比渭河断陷带相关研究成果,验证了该区域震源机制以正断型为主,具有拉张应力状态。     

2017年九寨沟7.0级地震前不同级别地震空区的演化过程分析

结合传统地震学方法与数字地震学方法,回顾总结了日常分析预报中针对九寨沟7.0级地震开展的相关工作,梳理总结了地震前提出的甘东南地震异常信息,进一步讨论了九寨沟地震前中期、短期及临震异常特征。通过分析九寨沟7.0级地震之前区域范围内不同震级活动图像,发现甘青川交界地区5级空区在震前向震中一侧收缩、4级地震超长平静458天、3级空区在震前4天被打破的现象,同时发现,震中附近区域震源机制一致性较高,反映了震源区的高应力水平。     

Time-averaged sub-layer concentration profiles in oscillatory sheet flows

Although thin on the order of several to tens of millimeters, sheet flows normally comprise a lower pick-up sub-layer and an upper contact-load sub-layer, separated at the bed level (z = 0). The time-averaged concentration profile in the pick-up sub-layer shows a ‘convex upward’ curvature, but ‘concave upward’ shape characterizes the time-averaged concentration profile in the contact-load sub-layer. The time-dependent concentration in the contact-load sub-layer is approximately in-phase with the free stream flow velocity, whereas it is nearly in anti-phase with the free stream flow velocity in the pick-up sub-layer. Two distinct analytical expressions of the time-averaged concentration profiles for the respective sub-layers are proposed. The expressions are validated with detailed observation datasets collected in the Groβer Wellenkanal (GWK) prototype wave flume in Hannover, Germany. The agreement between the predicted and the measured values is excellent. Interparticle collisions in the pick-up sub-layer and convective lifting processes associated with vortex shedding in the contact-load sub-layer are considered responsible for the opposite curvatures and in-phase/anti-phase concentration variations. Both transitional boundary and reference concentration are also elaborated.     

Fault geometrical model of Dujiangyan section in Longmenshan fault zone

The focal mechanism solution on the seismic fault plane can reflect the geometric and kinematic characteristics of faults, and it is an important way to further study the fine structure of fault plane. From the focal mechanism solution of the earthquakes around the Dujiangyan fault in Longmenshan fault zone, we derived the average dip angle of Dujiangyan fault is 45.1° based on the seismic moment tensor theory. In order to refine the fault geometry structure, this paper decomposed it into multiple sub-fault planes along the length and width of the fault plane and forms a number of models A13, B13, A23 a, A23 b, A23 c, B23 a,B23 b and B23 c, then calculated the sub-fault's dip of each model. In order to clarify exactly which one of the fault models is closest to the real fault model, the fault slip was carried out for each model in turn, then compared the surface displacement of each model with GPS observations. The results show that B23 c model with high dip in shallow and small dip in deep is the best model, the lengths of each subfault of Dujiangyan fault from south to north are 33 km, 21 km and 46 km, respectively. When the depth of the fault bottom is about 11 km, the dip angles are 70.56°, 67.41° and 45.55°.When the depth of the fault bottom is about 30 km, The fault dip angles are 44.55°, 29.18° and 44.25°.     

近断层速度脉冲与震源机制的关系浅析

本文初步分析了近断层速度脉冲的成因和特点,主要包括方向性效应与滑冲效应,并通过中国台湾集集地震的脉冲记录,分析了断层破裂方向和位移大小等震源参数对脉冲强度的影响。此外,基于有限移动源理论,说明了断层辐射与速度脉冲分布的关系,并探讨了利用运动学震源模型研究近断层地震动对速度脉冲影响的技术路线;评述了7种典型的等效速度脉冲模型,建议进一步研究等效速度脉冲函数与震源机制之间的关系。最后,简述了不同类型的断层引起速度脉冲的差异,并推测了产生脉冲型地震动的下限条件,同时展望该研究在地震预警方面的可能性。     

浙江临安4.2级地震特征及烈度调查

2017年4月12日,浙江省杭州市临安市发生4.2级地震,地震震中附近的潜川镇、河桥镇震感强烈,於潜镇、太阳镇、湍口镇等震感较为明显。在对震区地质构造、震源机制解资料分析的基础上,开展了烈度调查,并绘制了地震烈度图。本次地震震中烈度为Ⅴ度,面积22.6km2,烈度圈长轴方向北东向,与马金-乌镇断层走向一致。     

The effect of riparian tree roots on the mass‐stability of riverbanks

Plants interact with and modify the processes of riverbank erosion by altering bank hydrology, flow hydraulics and bank geotechnical properties. The physically based slope stability model GWEDGEM was used to assess how changes in bank geotechnical properties due to the roots of native Australian riparian trees affected the stability of bank sections surveyed along the Latrobe River. Modelling bank stability against mass failure with and without the reinforcing effects of River Red Gum (Eucalyptus camaldulensis) or Swamp Paperbark (Melaleuca ericifolia) indicates that root reinforcement of the bank substrate provides high levels of bank protection. The model indicates that the addition of root reinforcement to an otherwise unstable bank section can raise the factor of safety (F _s) from F _s = 1·0 up to about F _s = 1·6. The addition of roots to riverbanks improves stability even under worst‐case hydrological conditions and is apparent over a range of bank geometries, varying with tree position. Trees growing close to potential failure plane locations, either low on the bank or on the floodplain, realize the greatest bank reinforcement. Copyright © 2000 John Wiley & Sons, Ltd.