Implications of spatial heterogeneity for management of marine protected areas (MPAs): examples from assemblages of rocky coasts in the northwest Mediterranean

Marine protected areas (MPAs) are increasingly used as a management tool to preserve species and habitats. Testing hypotheses about the effectiveness of MPAs is important for their implementation and to identify informative criteria to support management decisions. This study tested the general proposition that MPAs affected assemblages of algae and invertebrates between 0.0 and 0.5 m above the mean low water level of rocky coasts on two islands in the Tuscan Archipelago (northwest Mediterranean). Protection was concentrated mainly on the west coasts of the islands, raising the possibility that neither the full range of assemblages nor the relevant scales of variation were properly represented within MPAs. This motivated the comparison of assemblages on opposite sides of islands (habitats). The effects of MPAs and habitat were assessed with a multifactorial sampling design; hypotheses were tested about differences in structure of assemblages, in mean abundance of common taxa and in univariate and multivariate measures of spatial variation. The design consisted of three replicate shores for each condition of protected and reference areas on the west side of each island and three unprotected shores on the eastern side. Assemblages were sampled independently four times on each island between June 1999 and January 2001. At each time of sampling two sites were selected randomly at each of two tidal heights to represent midshore and lowshore assemblages on each shore. Estimates of abundance were obtained using non-destructive sampling methods from five replicate 20x20 cm quadrats at each site. Results indicated differences among habitats in structure of assemblages, in mean abundance of common taxa and in univariate and multivariate measures of spatial variation at the scale of shores. Most of these patterns were inconsistent with the predicted effect of management through MPAs. The data suggest that designation of MPAs in the Tuscan Archipelago should proceed through management of multiple shores and types of habitat selected to guarantee protection to a representative sample of assemblages and to the processes responsible for maintenance of spatial patchiness at different scales. This study also shows that considerations of spatial heterogeneity are important to underpin management decisions about the number, size and location of MPAs.     

Spatial Ecology of Pre –Euro‐American Fires in a Southern Rocky Mountain Subalpine Forest Landscape

Natural disturbances such as fires have been widely studied, but less is known about their spatial ecology than about other aspects of them. We reconstructed and mapped pre–Euro‐American fire history in a subalpine forest landscape in southeastern Wyoming, and analyzed the fires using GIS. Mean fire interval varies little with topography (elevation, aspect, slope) and is spatially autocorrelated at distances of at least 2 km. Fires often spread downslope, and spread more than expected from the north and south and less than expected from the west, under the influence of particular synoptic climatic conditions. The landscape of 1868 a.d., at the time of Euro‐American settlement, was strongly influenced by fires. However, it contained large patches of connected forest and few high‐contrast edges, unlike the modern landscape, which is fragmented by industrial forestry and roads. The spatial ecology of the natural fire regime may be a useful guide for management.     

Rock avalanches of the Ardon River valley at the southern foot of the Rocky Range,Northern Caucasus,North Osetia

Deposits of very large rock avalanches were identified at the southern foot of the Rocky Range of the Northern Caucasus. Cliffs facing the Ardon River are 1–1.5 km high and composed of Cretaceous and upper Jurassic, hard, crystaline limestone, underlain by softer, middle Jurassic shale, siltstone and sandstone flysh. The largest rock avalanche, at Karivhoh, is ~2×10⁹ m³ in volume, travelled more than 7 km, and covered about 18 km² with deposits up to 200–300 m thick. All rock-avalanche bodies are composed of intensively crushed debris overlain by a blocky carapace. Numerous subsequent landslides develop within these deposits, and pose a threat to villages built on them.     

常德至张家界高速公路慈利段典型岩质边坡成生机理初探

在山区修建高速公路时,由于“高填深切”改变了自然条件下的地质营力,从而带来一系列的环境地质问题,尤以岩质边坡开花后的稳定问题突出,只有对自然岩质边坡进行深入的研究,才能更好地提出合理的人工边坡设计方案．而传统的岩质边坡分析方法多是定性的笼统地分析,对岩质边坡的成生机理难以做到具体的分析,许多地质现象无法解释．运用系统工程地质有关边坡变形渗流场的稳态坡形理论对常德至张家界高速公路慈利段的典型岩质边坡的成生机理及边坡开挖后的破坏机理进行了分析,为人工边坡的设计提供了可靠的依据．     

Australian Rock Coasts: review and prospects

Studies of Australian rock coasts (except carbonate reefs) are reviewed and considered in view of recent process and morphological studies. The unique nature of the Australian coast, its geographical distribution and relative stability mean that it is a productive environment in which to research fundamental questions concerning rock coasts. Future research directions are identified, specifically in the areas of processes, morphology and modelling.     

Pampean Orogen: An Intraplate Component of Early Paleozoic Deformation?

After accretion of the Pampean continental fragment to the western Rio de la Plata craton margin (530 Ma), subsequent deformation, crustal anatexis and plutonism may have been intraplate responses to Brasiliano-PanAfrican collisional tectonism on the eastern margin during the amalgamation of Gondwana. Investigations of intraplate orogens such as the Tien Shan and the Ancestral Rocky Mountains, as well as of analogue and numerical models, permit discrimination of two early Paleozoic tectonomagmatic phases in the Sierras Pampeanas. The first involved marginal trough subduction and calc-alkaline magmatism, culminating in accretion of the Pampean terrane to the western craton edge; the second was characterized by crustal anatexis and peraluminous plutonism, penetrative deformation and high-angle reverse faulting resulting from continental collision on the eastern craton margin.Field observations from modern (Tien Shan) and ancient (Ancestral Rocky Mountains) intraplate chains, deep seismic and borehole data, radiometric and fission-track data constitute control for analogue and numerical models of intraplate deformation resulting from continental collision. Near-simultaneous continent-wide deformation, regularly spaced ranges/buckles, reverse-fault initiation at fold hinges of buckles, and doubling of crustal thickness are replicated in structural arrays formed in four-layer analogue models of lithospheric buckling. These data have significant implications for the ductile deformation, crustral thickening and post-subduction plutonism that spanned central South America in Late Cambrian time.     

The influence of rock resistance on coastal morphology around Lord Howe Island,southwest Pacific

An Erratum has been published for this article in Earth Surface Processes and Landforms 27(7) 2004, 931. Lord Howe Island, in the northern Tasman Sea, is a remnant of a much larger Late Miocene basaltic shield volcano. Much of the island's coastline is exposed to waves that have unlimited fetch, but a marked contrast is provided by a fringing coral reef and lagoon that very effectively attenuate wave energy along a portion of the western coastline. The geology of the island is varied, with hard and resistant basalt lavas, breccias and tuffs of intermediate resistance, and highly erodible eolianites. This variability provides an excellent opportunity to examine the in?uence of rock resistance on the development of the spectacular rock coast landforms that occur around the island. The hardness of rocks and the extent of weathering around the coastline were assessed using a Schmidt hammer, and statistical analysis was undertaken to remove outlying values. On all but one occasion, higher mean rebound values were returned from fresh surfaces than weathered surfaces, but only half of these differences were statistically signi?cant. Shore platforms with two distinct levels are juxtaposed along two stretches of coastline and Schmidt hammer results lend support to hypotheses that the raised surfaces may be inherited features. Relative rock resistance was assessed through a combination of Schmidt hammer data and measurements of joint density, and constrained on the basis of morphological data. This approach formed a basis for examining threshold conditions for sea‐cliff erosion at Lord Howe Island in the context of the distribution of resistant plunging cliffs and erosional shore platforms. Copyright © 2004 John Wiley & Sons, Ltd.     

Shore platform morphology on a rapidly uplifting coast,Wellington, New Zealand

The coast of Wellington, New Zealand, is tectonically active and contains a series of uplifted and contemporary shore platforms that are developed in Triassic Greywacke. The platform profiles are rugged with relief of metre scale common. The surveyed platforms were formed at, and at two distinct levels 1–1·5 and 2–2·5 m above, mean sea level. They range in width up to 70 m and are highly fractured with fracture densities in excess of 20[sol ]m² common. The rate of development of these platforms is rapid, with lateral erosion rates of up to 0·15 m[sol ]yr calculated, allowing platform development to occur over centennial scales. Even given this rapid development, continued instantaneous uplift of the coast has meant they are unable to reach an equilibrium state, whereby the effectiveness of wave processes in removing material is reduced by platform extension. The co‐seismic uplift means that the rear of the platforms is raised beyond the limits of marine process and has become an area of deposition. Although no direct process measurements were made the highly fractured nature of the bedrock appears to play a major role in platform evolution, with wave processes being easily able to pluck blocks as evidenced by fresh erosion scars and active gravel beaches at the rear of many platforms. This coast therefore represents an extremely dynamic youthful shore platform environment, where the processes of marine abrasion can be observed over historical timescales. Copyright © 2005 John Wiley & Sons, Ltd.     

Morphological features and processes in the central Algarve rocky coast (South Portugal)

Morphological features along the Algarve rocky coast, South Portugal, are identified and described, with an emphasis on shore platforms and notches. The contributions of processes, such as wave attack, chemical weathering and bioerosion, to sculpting the shore platforms are discussed. The preferential localization of shore platforms on sites exposed to waves, and the lack of significant chemical weathering, point to wave erosion as the first-order factor in platform formation, whilst bioerosion/bioprotection, lithology and geological structure determine platform morphological variations. In addition, platforms above the present intertidal zone appear to have a polygenetic evolution, being inherited from former sea-level highstands and currently undergoing chemical weathering. The occurrence of notch features is independent of the degree of exposure to waves, but they mostly occur where the substratum is sand. Hydrostatic pressure appears to be an important factor in the formation of marine caves in the more sheltered sites.