Design Earthquakes in the U.K.

Three sites in the UK are taken, representative of low, medium and high hazard levels (by UK standards). For each site, the hazard value at 10⁻⁴ annual probability is computed using a generic seismic source model, and a variety of ground motion parameters: peak ground acceleration (PGA), spectral acceleration at 10 Hz and 1 Hz, and intensity. Disaggregation is used to determine the nature of the earthquakes most likely to generate these hazard values. It is found (as might be expected) that the populations are quite different according to which ground motion parameter is used. When PGA is used, the result is a rather flat magnitude distribution with a tendency to low magnitude events (\le 4.5 ML) which are probably not really hazardous. Hazard-consistent scenario earthquakes computed using intensity are found to be in the range 5.8–5.9 ML, which is more in accord with the type of earthquake that one expects to be a worst-case event in the UK. This revised version was published online in July 2006 with corrections to the Cover Date.     

Development characteristics of interlayer oxidation zone type of sandstone uranium deposits in the southwestern Turfan-Hami basin

The known uranium ore and anomaly occur-rences are distributed mainly in the southwestern part of the Turfan-Hami basin. The focus of current explo-ration is placed on the leachable interlayered oxidation zone type of sandstone uranium deposits. Uranium deposits in the sedimentary basin can be classified into three types in accordance with their host rock types, i.e. the sandstone-type uranium deposits, the coal rock-type uranium deposits and the mud-stone-type uranium deposits. The sandstone…     

Optimal design of viscoelastic dampers using eigenvalue assignment

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.     

A comparative study on the illite crystallinity and the clay mineral reflectance spectral index for subdividing the very low-grade metamorphic belt along the Lizhou-Hekou geological section in the Youjiang sedimentary basin, Guangxi, China

To examine the application potential of hyperspectral remote sensing techniques in classifying very low-grade metamorphic belts, the composition of clay minerals and the cyrstallinity of illite from mudstones were measured using XRD and VIS-SWIR (400-2500 nm) reflectance spectroscopy. Based on the illite cyrstallinity, Kubler Index (KI), the Early Triassic LuoLou Group and the Middle Triassic lower Baifeng Formation were classified as the lower Epizone with KI△2θ° ranging from 0.22 to 0.25, the upper Baifeng Formation as upper anchizone with KI△2θ°ranging from 0.26 to 0.33, and the Hekou Formation as lower anchizone with KI△2θ° ranging from 0.38 to 0.40. According to a KI△2θ° value of 0.43, it is possible that there may exist a local diagenetic zone in the upper strata. The illite cyrstallinity Kubler index and the metamorphic grade increase from the bottom to the top of the stratigraphic sequence. The metamorphic grade boundaries nearly match the stratigraphic boundaries, indicating a burial metamorphism nature for the stratigraphic sequence. From the bottom to the top of the sequence, the spectral absorption band center of clay minerals from fresh rocks is around 2200 nm. The absorption band centers change towards shorter wavelengths: the Luolou Group being at 2220 nm, the Baifeng Formation at 2217-2213 nm, the lower member of the Hekou Formation at 2214-2206 nm, and the upper member of the Hekou Formation at 2205-2197 nm. The spectral absorption band center of illite shows the same change pattern. These results indicate that very low-grade metamorphic belts can be subdivided using spectral indices of clay minerals, which are measured by using field portable spectroradiometers. However, it may not work well with satellite and airborne sensors.     

The Frozen Soils and Devastating Characteristics of West Kunlun Mountains Pass Ms 8.1 Earthquake Area in 2001

The investigation on damages to frozen soil sites during the West Kunlun Mountains Pass earthquake with Ms 8.1 in 2001 shows that the frozen soil in the seismic area is composed mainly of moraine, alluvial deposit, diluvial deposit and lacustrine deposit with the depth varying greatly along the earthquake rupture zone. The deformation and rupture of frozen soil sites are mainly in the form of coseismic fracture zones caused by tectonic motion and fissures,liquefaction, seismic subsidence and collapse resulting from ground motion. The earthquake fracture zones on the surface are main brittle deformations, which, under the effect of sinlstral strike-slip movement, are represented by shear fissures, tensional cracks and compressive bulges. The distribution and configuration patterns of deformation and rupture such as fissures, liquefaction, seismic subsidence and landslides are all related to the ambient rock and soil conditions of the earthquake area. The distribution of earthquake damage is characterized by large-scale rupture zones, rapid intensity attenuation along the Qinghai-Xizang (Tibet) Highway, where buildings distribute and predominant effect of rock and soil conditions.     

后遥感应用技术研究与地质实践——以东胜—神木地区铀资源勘查为例

介绍了后遥感应用技术提出的背景及技术构成,阐述了该技术的研究内容及取得的地质成果。实践表明,在地质勘查领域,后遥感应用技术比单一遥感技术具有更大的实用价值和更好的应用效果。     

RGMAP系统在1：5万区调中的应用

根据RGMAP系统在崇阳县幅1：5万区调过程中的应用实践．阐述了数字区调过程中的数字路线、数字实测剖面数据采集以及室内数据整理、地质图编稿和专题图件制作的工作流程和方法，在此基础上对RGMAP综合应用进行了展望．     

准噶尔盆地表层结构基本类型及特征

地震勘探区内表层及近地表结构的地球物理特征，往往取决于相应的地质体结构的变化．研究不同表层及近地表地质体的地质特征和地球物理特征，对地震勘探中静校正方法的确定以及静校正量的求取至关重要．准噶尔盆地就其表层地质结构可分为山前冲积扇、戈壁、农田、沙漠等类型，不同类型的地质结构体具有各自独特的地球物理特征。     

发射光谱载体蒸馏法测定地质样品中微量硼铍锡银

选择了适合的缓冲剂,利用载体蒸馏法将被测元素与基体元素分离,使Be转变为易挥发的氟化物与B、Sn、Ag同时蒸发;降低了谱线背景及元素检出限;加入内标元素Au、Bi,提高了方法的准确度和精密度;采用普通 3mm×3mm×0.7mm杯型电极,装样量少,操作简单。方法检出限(wB/10-6)分别可达B1.5、Be0.3、Sn0.8、Ag0.02;准确度(Δlog C)基本在-0.05～0.05,精密度(RSD,n=8)为2.9%～17%。     

CASIOfx-4500PA型计算器在矿床地质勘查中的应用

CASIOfx-4500PA型计算器为可编程、大容量的科学计算器。通过对地质计算中面积计算、槽坑钻样品厚度计算、钻孔弯曲度修正值计算的原理阐述，简化了计算程序，提高了计算效率。