Video-monitoring of wood discharge: first inter-basin comparison and recommendations to install video cameras

Wood in rivers plays a major role both ecologically and morphologically. In recent decades, due to human activities in the river channels and along the riparian zone, wood obstruction and jamming has exacerbated flooding hazards and infrastructure damage. Therefore, it is necessary to quantify the wood flux and discharge in rivers to improve wood hazard management. Among the various methods for monitoring the wood flux in a river, the streamside videography technique is effective given its high temporal and spatial resolution. Previous work monitored the wood discharge (m³/s) using this technique in the Ain River (France) during three floods (MacVicar and Piégay, 2012), and the same method is implemented on the Isère River (France) to obtain the statistics of wood discharge for two floods. Comparison between the two sites supports the generalization of both the monitoring technique and the link between wood discharge and flood characteristics. We first show that the maximum wood discharge is observed at bankfull discharge, and we confirm the three stage model proposed by MacVicar and Piégay (2012). Additionally, transverse distributions of the number of wood pieces and corresponding wood length appear to be similar for different flood magnitudes on each site. As a technical contribution, the use of the same technique on two sites allows for recommendations on key decisions related to the location and implementation of the equipment. Both statistical and technical contributions can be used by decision makers to implement this monitoring technique, acquire the wood transport parameters, and evaluate the potential wood hazards at local scale or along a river. © 2020 John Wiley & Sons, Ltd.     

Stream nitrate levels in a small catchment in south west England over a period of 35 years (1970–2005)

This study considers a 35‐year record of streamwater nitrate concentration in a small agricultural catchment in south west England (Slapton Wood). The study revisits earlier work to assess whether upward trends have been maintained and how the controls upon streamwater concentration have been altered. The study has shown that (1) the catchment has reached a new position of equilibrium and increases in nitrate concentration have lessened; (2) the occurrence of severe drought in the record means that records of less than a decade are misleading and only long‐term records can illustrate changes of state; (3) the change of state observed in the catchment is illustrated in the switching of long‐term memory effects from a negative to a positive annual memory and (4) several significant long‐term impulsivity relationships with rainfall that become insignificant over the course of the study period. The study shows the importance of long‐term records in understanding changes in state in catchments and understanding the time constants of a range of driving processes. Copyright © 2009 John Wiley & Sons, Ltd.     

Extending the Place Glacier mass-balance record to AD 1585, using tree rings and wood density

Recognizing that climate influences both annual tree-ring growth and glacier mass balance, changes in the mass balance of Place Glacier, British Columbia, were documented from increment core records. Annually resolved ring-width (RW), maximum (MXD), and mean density (MD) chronologies were developed from Engelmann spruce and Douglas-fir trees sampled at sites within the surrounding region. A snowpack record dating to AD 1730 was reconstructed using a multivariate regression of spruce MD and fir RW chronologies. Spruce MXD and RW chronologies were used to reconstruct winter mass balance (Bw) for Place Glacier to AD 1585. Summer mass balance (Bs) was reconstructed using the RW chronology from spruce, and net balance was calculated from Bw and Bs. The reconstructions provide insight into the changes that snowpack and mass balance have undergone in the last 400 years, as well as identifying relationships to air temperature and circulation indices in southern British Columbia. These changes are consistent with other regional mass-balance reconstructions and indicate that the persistent weather systems characterizing large scale climate-forcing mechanisms play a significant glaciological role in this region. A comparison to dated moraine surfaces in the surrounding region substantiates that the mass-balance shifts recorded in the proxy data are evident in the response of glaciers throughout the region.     

Ancient charcoal as a natural archive for paleofire regime and vegetation change in the Mayumbe,Democratic Republic of the Congo

Charcoal was sampled in four soil profiles at the Mayumbe forest boundary (DRC). Five fire events were recorded and 44 charcoal types were identified. One stratified profile yielded charcoal assemblages around 530 cal yr BP and > 43.5 cal ka BP in age. The oldest assemblage precedes the period of recorded anthropogenic burning, illustrating occasional long-term absence of fire but also natural wildfire occurrences within tropical rainforest. No other charcoal assemblages older than 2500 cal yr BP were recorded, perhaps due to bioturbation and colluvial reworking. The recorded paleofires were possibly associated with short-lived climate anomalies. Progressively dry climatic conditions since ca. 4000 cal yr BP onward did not promote paleofire occurrence until increasing seasonality affected vegetation at the end of the third millennium BP, as illustrated by a fire occurring in mature rainforest that persisted until around 2050 cal yr BP. During a drought episode coinciding with the ‘Medieval Climate Anomaly’, mature rainforest was locally replaced by woodland savanna. Charcoal remains from pioneer forest indicate that fire hampered forest regeneration after climatic drought episodes. The presence of pottery shards and oil-palm endocarps associated with two relatively recent paleofires suggests that the effects of climate variability were amplified by human activities.     

Pull-out behaviour of wood bolt fully grouted by PS-F slurry in rammed earth heritages

This article presents a laboratory and field investigation of pull-out resistance of wood bolts in rammed earth heritages. The laboratory testing involved axial tensile tests of four grout specimens prepared in specially designed moulds using PS-F (Potassium Silicate solution-Fly ash) slurry to investigate the performance of anchors. The field testing involved pull-out tests of three wood anchors installed in rammed earth heritages by gravity grouting. Experiments reveal that the failure mode is the pull-out of bolt from grout and average skin friction resistance of bolt–grout interface is approximately 0.34MPa. Load–displacement curves and elastic–residual displacement derived from cyclic loading indicate such anchor system has strong ductility with small elastic deformation and large residual deformation. Bond collapse firstly occurs at the loaded end and then propagates towards the full bonded length. Bond stress distribution is not uniform along the bonded length. Maximum bond stress distributes at the range from 0.3 m to 0.4 m. Emergence of compressive strain in the interface reveals such anchor system enjoys the advantages of both tensile and compressive anchor types, which significantly differs from results from other regular bolts. The research conclusion makes scientific senses to traditional material and craft in rammed earth heritages.     

Bottom ash of trees from Cameroon as fertilizer

Utilization of wood bottom ash as fertilizer additive contributes to the return of valuable nutrients to agricultural soils, especially when no artificial mineral fertilizer is being used. In general, wood combustion ash is enriched in calcium and potash, and may also contain elevated amounts of zinc, but the concentrations of these elements depend on tree species, part of the tree, harvest season and local soil type. In this study, bottom ash samples from eight different agricultural wood species from Cameroon, Africa were investigated by using X-ray diffraction and atomic absorption spectroscopy to determine the refractory components and the concentrations of selected heavy metals and arsenic. Results show calcite, potassium salts, periclase and quartz as major components. These phase contents were used to calculate major element concentrations, which were subsequently validated by X-ray-fluorescence analysis. The chemical compositions varied within the range of common compositions of wood ashes. Six of the ashes reached sufficient concentrations of calcium to be defined as a “calcium fertilizer”. Pb contents are most variable, ranging from 0.03 to 21.1 mg/kg. Concentrations of Ni, Cu, Zn, Cd, Pb, and As are all lower than the strictest limit concentrations required for wood ash fertilizers and therefore, the studied wood ashes can be used without environmental concern.     

Effectiveness of various dispersed alkaline substrates for the pre-treatment of ferriferous acid mine drainage

Dispersed alkaline substrates (DAS) have been successfully used in passive treatment of highly contaminated acid mine drainage (AMD) to limit coating and clogging issues. However, further optimization of DAS systems is still needed, especially for their long-term efficiency during the treatment of ferriferous AMD. In the present study, three types of DAS comprised of natural alkaline materials (wood ash, calcite, dolomite), in different proportions (20%v/v, 50%v/v, 80%v/v), and a substrate with high surface area (wood chips) were tested in 9 batch reactors. The testing was carried out, in duplicate, for a period of 91 days, to evaluate the comparative performance of the mixtures for iron pre-treatment in ferriferous AMD (2500 mg/L Fe, at pH 4). Results showed increasing of pH (between 4.15 and 7.12), regardless of the proportion of alkaline materials in the DAS mixtures. Among the tested mixtures, wood ash type DAS were more effective for Fe removal (99.9%) than calcite or dolomite type DAS (up to 66%). All tested DAS had limited efficiency for sulfate removal and an additional treatment unit, such as a sulfate-reducing biochemical reactor, is needed. Moreover, due to the similar performances of the calcite and dolomite DAS, they could be potentially substituted and rather be used in a polishing treatment unit. Based on these findings, the most promising mixture was the 50% wood ash type DAS (WA50-DAS).     

Distribution of thallium and accompanying metals in tree rings of Scots pine (Pinus sylvestris L.) from a smelter-affected area

Distribution of Tl, Zn, Cd, Pb, K, Ca, Mg and Mn and Pb isotopic composition in tree rings of Scots pine (Pinus sylvestris L.) from an area affected by primary Zn smelting (Olkusz, southern Poland) were investigated. Elevated concentrations of Tl (up to 0.8 mg kg⁻¹) in pine trees imply that conifers tend to accumulate this metal to some extent. A generally positive relationship between soil and tree-ring Tl levels was identified. The Tl patterns in stem wood did not correspond to changes in Tl deposition; the lateral translocation of Tl in the sapwood and its accumulation at the sapwood-heartwood boundary (i.e., in the inner sapwood) is suggested. It is probable that the specific behavior of Tl in trees results from its biogeochemical analogy with K. In contrast, tree-ring patterns of Zn and Cd significantly correlated with their deposition; nevertheless, a partial shift of these metals towards the stem center cannot be excluded. The isotopic composition of Pb (²⁰⁶Pb/²⁰⁷Pb ~ 1.172–1.184) in trees and underlying soils revealed the predominant influence of smelter emissions (²⁰⁶Pb/²⁰⁷Pb ~ 1.17) on Pb contamination. Analysis of main nutrients (Ca, Mg and Mn) in wood reflected environmental changes related to acid deposition.     

Packed‐Column of Granular Activated Carbons for Removal of Chemical Oxygen Demand from Industrial Wastewater

In the present study, chemical oxygen demand (COD) removal by packed‐columns of activated carbon (AC) derived from two different materials (coal activated carbon, CAC and wood activated carbon, WAC) is reported as part of an on‐site wastewater treatment system for handling small volumes of wastewater generated at wood‐floor industries for which there are no proper on‐site treatment options available in the market. The performance of the sorbents, the effect of bed depth (0.19 and 0.57 m) and volumetric load (0.10 and 0.24 m h^?1) on the breakthrough curve of sorption systems were studied. The results indicated the feasibility of using both ACs to treat these wastewaters. At the bed depth (0.57 m), volumetric load (0.24 m h^?1), and 30% breakthrough, CAC and WAC showed treatment capacity of 40.5 L kg^?1 in 250 h and 23.8 L kg^?1 in 63 h, respectively. This indicated that CAC requires longer retention times to reach a performance similar to WAC. The experimental data was fit into the bed depth‐service time model showing that under the same conditions, CAC had higher maximum sorption capacity (N₀) than WAC. Moreover, thermal regeneration at 500°C temperature could be a cost‐effective procedure since the reuse of spent AC through such regeneration process for further treatment could still achieve 90% of the initial sorption capacity, reducing then costs for the use of new sorbents and also the need for waste disposal.