MODIFIED MASS FLUX CUMULUS CONVECTIVE PARAMETERIZATION SCHEME AND ITS SIMULATION EXPERIMENT—PART Ⅰ:MASS FLUX SCHEME AND ITS SIMULATION OF THE 1991 FLOOD EVENT*

Based on the existing cumulus convective parameterization schemes,a mass flux scheme (MFS) for cumulus convective parameterization has been successfully developed by reference to the work of Chen et al. (1996).The MFS is a comprehensive scheme.In MFS,not only the importance of the large-scale moisture convergence is taken into account,but also it includes the cumulus updrafts and downdrafts,cumulus-induced subsidence in the environmental air.entrainment,detrainment and evaporation.The interaction between the cumulus and the environment is described by using a one-dimensional bulk model.At the same time the scheme includes the penetrative and shallow convections.The MFS has been successfully incorporated into the regional climate model RegCM2 developed by NCAR.The new model has been applied to simulate summer monsoon characteristics and their variations of heavy rainfall process in the Changjiang-Huaihe River Basins for three months from May to July 1991.The results show that the new model can successfully simulate this rainfall prolonged process.By comparising the model outputs of RegCM2.using the Kuo scheme and the MFS.it is found that the MFS is better in simulating the surface temperature,rainfall position and amount,and rainfall duration.     

Determining gaseous composition of fluid inclusions with quadrupole mass spectrometer

Quadrupole mass spectrometer (QMS) is an instrument for effectively determining gaseous composition of fluid inclusion. The gaseous component is extracted from inclusions with thermal decrepitation method and then determined with the sensitive QMS instrument. The method is characterized by high sensitivity and high accuracy with the relative standard deviation (RSD,n=6) of less than 3%. It has been successfully used for analyzing fluid inclusions. The analytical results meet the requirement of geological study.     

基于高温高压岩石破裂实验结果对中强地震前震中附近区域部分地震学现象的初步解释

依据高温高压岩石破裂实验结果并结合理论分析，对 附近区域不同深度温压条件下岩石变形破坏性质及破坏失稳的力学行为进行了研究，在一次应力加载循环中，发生破坏的部位随时间具有向深部下迁的趋势。考虑到深度温压条件下岩石的渐进式破坏行为及突发失稳，对主震前震中附近区域小地震活动的增强、平静、活化等现象，以及b值等时间序列参数变化的可能机理进行初步探讨，并简单讨论了两类平静和两类b值变化的可能原因。     

Inferring erosional resistance of bedrock units in the east Tennessee mountains from digital elevation data

Measures of local relief, regional relief, and slope were calculated from digital elevation models (DEMs) for 50 bedrock units in the Ridge and Valley and Blue Ridge provinces of Tennessee. Each of these measures was normalized and the three were then averaged to produce the erosional resistance index (ERI). Bedrock units with higher ERI values include coarse clastics, intermediate clastics, and metaplutonics. Units with lower values include shales, limestones, limestones plus dolostones, and carbonates plus fine clastics. Dolostones tend to have intermediate values. The calculated ERI values were compared with subjective ratings by a geologist with decades of field experience in east Tennessee. Generally, the agreement between the two ratings was good, the most glaring exception being several shales with improbably high ERI values. These turned out to be thin units cropping out beneath very hard sandstones, allowing them to stand higher and steeper than would otherwise be possible. A systematic method for detecting such erroneously high ERI values is suggested. Inspection of a drainage map superimposed on the geology map shows that in a given area, streams tend to flow on rock units with the lowest ERI values. In addition, statistical analysis shows that bedrock units with the lowest ERI values are, on average, almost three times closer to the nearest stream and six times as likely to have streams flowing on them than are units with highest values. Further, the effect of ERI on stream location is strongest for streams with drainage areas between 1 and 30 km². Thus, small streams appear to be subject to greater lithologic control than are larger streams.     

层控夕卡岩型矿床成矿系统的元素活动性及质量迁移--以铜陵冬瓜山铜矿床为例

应用改善了的质量平衡方程研究冬瓜山层控夕卡岩型铜矿床成矿系统的元素活动性及质量迁移，结果表明：系统中Zr,Hf,Y和Nb为不活动元素，其余均为活动元素。主量元素中仅CaO为迁出组分，其质量迁移量为84％，其余均为带入组分，带入量最大的SiO2的质量迁移量高达2384％；稀土元素均为带入组分，其中，中稀土较轻稀土和重稀土的活动性更强；其它微量元素中，带入序列由强到弱为：Cr→Ta→Sn→Th，迁出序列由强至弱依次为：U→Sb→Ni—Sr→Ba→Bb→Co→W；成矿元素Cu和Ag为带入组分，其中Cu的带入量最大，质量迁移量高达1200％。本文还得出两点具普适性认识：①稀土元素较其它微量元素对体系条件的变化更为敏感，且往往表现出明显的规律性变化，能更好地示踪地质地球化学过程。②不同元素在不同体系中的行为特征差异极大，仅凭经验判定某一元素为不活动元素往往不可靠。因此，在开展质量平衡研究时，首先采用适当方法确认体系的不活动元素是一项不可或缺的前提工作。     

热害矿井巷道温度场分布规律研究

为解决深部开采带来的热害问题，基于地质学和热力学理论，建立了热害矿井巷道温度场的数学模型，研究了巷道内部温度场随埋深和通风热速的变化规律。计算结果表明，巷道温度场对埋深的敏感度要高于风速、温度随埋深的增加而呈阶段性递增。控制入口温度是解决矿井热害的关键。以上结论为矿井热害的综合治理提供了重要依据。     

碱熔沉淀-等离子体质谱法测定地质样品中的多元素

采用过氧化钠焙融或偏硼酸锂熔融分解样品，将提取液碱性沉淀，通过过滤分离掉大量熔剂，再将沉淀用酸复溶后用等离子体质谱测定26个元素。通过对比，偏硼酸锂熔融—酸提取—碱性沉淀的方案，空白低，易操作，成本低，大多数元素测定结果的相对误差＜10％，相对标准偏差＜5％(n＝10)，与标准值相吻合。     

乙醇增强—电感耦合等离子体质谱法直接测定地质样品中碲

建立了HF—HN03密封酸溶以及Na2O2熔融处理样品，乙醇增强灵敏度，电感耦合等离子体质谱直接测定地质样品中微量和超痕量碲的方法。样品溶液中加入乙醇(φ＝4％)，在0．85L/min的载气流速下，碲信号可增强2．5倍以上。碲的方法检出限(100，DF＝1000)为0．02μg/g。用土壤和水系沉积物国家一级标准物质验证了方法的准确度，标准物质的绝大多数分析结果与标准值的误差在允许范围内。分析了大洋多金属结核样品及深海沉积物样品中的微量碲，结果与其他方法相符，精密度试验RSD(n＝3)＜10％。     

高温密闭溶样电感耦合等离子体质谱准确测定辉钼矿铼-锇地质年龄

采用Carius管高温密闭溶样,电感耦合等离子体质谱(ICP MS)法对采自两个不同金属矿床的辉钼矿样品的Re Os同位素地质年龄进行了准确测定。所得出的Re Os年龄的平均值分别为14.26±0.19Ma和34.39±0.81Ma,相对标准偏差分别为1.3%(以2s计算,n=6)和2.4%(以2s计算,n=7)。采用国际通用的ISOPLOT软件按Model1模式对这两组样品分别进行处理,所得Re Os等时线年龄分别为14.32±0.46Ma和34.52±0.38Ma(均为95%置信水平)。同批次样品中所带的内部管理样JDC的Re Os年龄与国际先进实验室采用负离子热表面电离质谱测量所得的结果吻合也较好。说明在严格的质量体系保证及有效地降低实验室空白水平的前提下,ICP MS完全可以准确地测定辉钼矿的Re Os年龄。     

滇中震旦系碳酸盐岩破碎地层的钻探护孔新技术

破碎地层中钻探，采用有效的护孔技术是避免孔内事故发生的重要手段，同时也是保证完成钻探各项技术经济指标的先决条件。本文阐述了在具代表性的磷矿破碎地层中钻进所遇到的护孔难题及其所采用的护孔新技术、新方法。