基于风化剥落深度的衢州古城墙小西门岩石砌块和蛎灰勾缝条长期抗风化能力研究

不同岩石在相同风化环境条件下的抗风化能力不同。如何评定岩石的抗风化能力是近年来人们十分关注的研究课题之一,因为它对岩石风化机理分析和石质文物长期保护研究有着重要的科学价值。位于浙江省衢州市的古城墙小西门建于明代晚期。小西门城墙的岩石砌块有多种岩性,它们之间的风化剥落深度相差较大。利用三维激光扫描仪测量了小西门某特定研究区中包含多种岩性的岩石砌块的风化剥落深度,并以此来评定不同岩性岩石的长期抗风化能力,以给出相应的排序。在现场还发现,与所研究的多数岩石砌块相比,被古人用作为古城墙各砌块之间勾缝的黏合材料蛎灰的抗风化能力更强。     

巴东组紫红色泥岩三轴压缩试验及本构模型研究

采用MTS压力试验系统对巴东组紫红色泥岩进行了4个不同级别围压的三轴压缩试验和单轴试验。得到了巴东组紫红色泥岩在这5个围压下的全应力-应变曲线。根据试验结果,把全应力-应变曲线分为4个主要阶段,并分析了屈服强度、峰值强度、残余强度随围压的变化规律,结果表明,它们与围压成线性增大关系,满足库伦-莫尔强度准则。同时,根据试验曲线,利用双线性-线性软化-残余理想塑性模型来模拟巴东组紫红色泥岩,并给出了每一段的本构方程,确定了相关参数,可供类似的工程参考。     

Stress Measurement by Overcoring at Shallow Depths in a Rock Slope: the Scattering of Input Data and Results

This paper describes a field experiment of stress measurement using the overcoring method performed in a rock slope, called Rochers de Valabres (located in France’s Southern Alps Region), a field laboratory site prone to rockfalls. Six measurements were conducted at shallow depths from the surface, moving deeper along a sub-horizontal borehole. The experiment was conducted in heterogeneous and anisotropic gneiss, with the overcored rock elastic properties, as evaluated by biaxial and uniaxial tests, being widely scattered. Since stress calculations are sensitive to all input data uncertainties, strain inversion was, thus, performed using an experimental device and Monte Carlo simulations. The experimental device allows the assessment of rather broad confidence intervals for both stress magnitude and orientation. The results indicate that the stress state in the surface area is quite heterogeneous and may be correlated with topography. The measurements show a nonlinear stress distribution with distance to the free surface, along with high values of principal stresses, despite the vicinity of the surface. Although influenced by local topography, orientations of the principal computed stresses are characterized by a high turnover due to local heterogeneities. The results are roughly in accordance to a 2D finite element model of the site.     

香格里拉县松诺斑岩体与普朗斑岩体特征对比

松诺斑岩体位于云南省香格里拉县境内,其与南部的普朗超大型斑岩铜矿距离十分靠近.随着近年来普朗铜矿外围找矿工作的展开,松诺地区显示出良好的找矿前景.本文重点就松诺斑岩体的地球化学特征,与普朗斑岩体的地球化学特征进行了对比讨论,以揭示它们之间的同源关系.     

浅埋双连拱隧道围岩边坡体系变形机理及稳定性分析

双连拱隧道是一种新的隧道形式, 由于其整体跨度大、结构复杂、施工工序繁琐, 在地形偏压、地质条件复杂的情况下修建双连拱隧道难度较高, 尤其在洞口段容易出现衬砌开裂、边坡变形等一系列工程问题。结合安徽铜黄高速公路汤屯段富溪隧道进口段工程, 采用地质条件研究与数值模拟分析相结合的研究手段, 对复杂地质条件下偏压双连拱隧道围岩① 边坡体系在施工过程中应力应变发展过程进行了研究。综合分析表明, 富溪隧道进口段处于F5断层影响带内, 岩体呈碎裂结构,同时, 受到地形偏压影响, 隧道开挖后衬砌和围岩表现为沉降变形和侧向变形, 进口边坡在隧道围岩变形的诱导下, 表现为蠕滑- 拉裂变形破裂。根据以上研究成果, 提出了富溪隧道变形治理应以控制进口段隧道拱顶的变形为主。     

郑州市城区深部基岩层热储特征分析

通过对郑州市城区深部基岩层热储的岩性、构造、热源及盖层条件分析研究,总结了该区热储特征,并首次提出了断裂循环型带状热储构造网络体系的构思,这对该区今后深部基岩层热储的研究具有一定的参考意义。     

新疆伊吾淖毛湖北山金矿床地质特征与成矿模式

论述卓毛湖北山金矿地质特征和控矿因素，并建立三位一体成矿模式，以拓宽找矿思路。     

A simple criterion for the machinability of hard rocks

Conclusions The application of mechanical methods for rapid excavation requires more detailed and precise knowledge of the site, but there is no single parameter which can provide a comprehensive measure for the selection and performance of a tunnel boring machine.The machinability index proposed in this paper is based on four different parameters which influence the performance of a tunnelling machine and are widely accepted by the engineers and geologists. In order to develop a comprehensive measure regarding the borability of rocks,in situ conditions must be evaluated. The machinability index coupled with thein situ information would facilitate judicious decisions regarding the application and selection of tunnel boring machines.The geological conditions and rock characteristics cannot be controlled but their knowledge can prevent costly mistakes in equipment selection and assist in identifying alternative excavation systems, therefore a thorough site investigation can substantially reduce the economic and technical risks associated with tunnelling and mine development.     

Use of rock classification to estimate roof caving span in oblong workings

Summary Indian coal measures have widely varying caving characteristics. The maximum roof span of a longwall or depillaring panel at the time of nether roof collapse is shown to have a direct relation withRQD from a study of 12 case histories. A similar relation between maximum unsupported span of openings and rock mass quality as defined by theQ-system was also demonstrated. A simple nomogram is presented to predict the face advance required to cause roof collapse when theRQD or rock mass quality is known.