Late Cenozoic deformation subsequence in northeastern margin of Tibet --Detrital AFT records from Linxia Basin

Two events of Tibet uplifting are revealed by detrital apatite fission track (AFT) age data from Linxia Basin. They occurred at about 14 and 5.4-8.0 MaBP respectively. We interpret the first one to be related to the uplifting of the northern Tibet, which might have resulted from convectively removing the thickened lower lithosphere. The second one is a result of Laji Mountain uplifting. Numerous studies of the Tibetan Plateau suggest that the onset time of the deformation in the northeastern margin of Tibetan Plateau and the time of Tibet attaining to its present elevation is about 8 MaBP. They are approximately coincident with the uplift of Lajishan Mountain. It suggests that the northeastern margin of Tibet propagated northeastwardly to its present site in about 8 MaBP for accommodating the sustained convergence between India-Eurasia plate and for keeping its high elevation. The active block pattern dominating the strong earthquake distribution of Chinese continent probably formed at about 8.0-5.4 MaBP.     

应用RMi法估算岩体变形模量

RMR法与Q法是国内外八、九十年代岩体质量和参数估算的常用方法,然而RMR法和Q法对质量较差的岩体不太实用,而RMi法是一种既适用于软岩又适用于硬岩的岩体质量评价和参数估算方法。本文在介绍RMi法基本原理的基础上,对贵州省鱼简河水库坝基岩体变形模量进行确定。     

Geotechnical and geoenvironmental characteristics of man-made underground structures in Cappadocia, Turkey

Underground cities and semi-underground settlements, most of which are 1500 years at least, exist in the Cappadocia Region of Turkey. These man-made rock structures are carved in soft tuffs and the best examples of long-term performance of man-made structures in the field of rock engineering. The tuffs also have good thermal isolation properties to be used as housing and storage of foods. In this article, the authors are only concerned with physical and short-term mechanical characteristics due to the wide-spectrum of the theme and the in situ characterization of the Cappadocia tuffs, and the results of investigations are presented. In addition, a critical overview on possible engineering geological problems at Cappadocia with mechanical aspects of historical and modern rock structures and their implications in rock engineering is made. From the experimental results in the field, it is evident that the engineering characteristics of these rocks do not show significant changes in vertical and horizontal directions. However, they are prone to atmospheric conditions. In addition, temperature and humidity measurements at different floors of the underground cities and various parts of semi-underground settlements indicated that variations in climatic conditions of the openings are very small when compared to those outside the ground surface.     

Deformation at Stromboli volcano (Italy) revealed by rock mechanics and structural geology

We approach the reconstruction of the recent structural evolution of Stromboli volcano (Italy) and the analysis of the interplay between tectonics, gravity and volcanic deformation. By tying together structural, lithostratigraphic and rock mechanics data, we establish that since 100 ka BP, the edifice has faulted and jointed mainly along NE-striking planes. Faults mostly dip to the NW with normal displacement. Taking also into account the presence of a NW-trending regional least principal stress and of tectonic earthquake hypocenters inside the cone, we suggest that this fracturing can be related to the transmission of tectonic forces from the basement to the cone. Dyking concentrated along a main NE-trending weakness zone (NEZ) across the volcano summit, resembling a volcanic rift, whose geometry is governed by the tectonic field. In the past 13 ka, Stromboli experienced a reorganisation of the strain field, which was linked with the development of four sector collapses affecting the NW flank, alternating with growth phases. The tectonic strain field interplayed with dyking and fracturing related to unbuttressing along the collapse shoulders. We propose that tectonics control the geometry of dykes inside the cone and that these, in turn, contribute to destabilise the cone flanks.     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

一种基于多项式的图像压缩方法

介绍了数字图像压缩的一种新的思维方法，即在将给定的图像块根据纹理特征分为平滑块、斜面块、曲面块、边缘块后，在基于不同多项式对不同类图像块分别进行处理的过程中，对于包含大量高频信息的边缘块，通过提取边缘轮廓位置信息，减少图像块内的高频信息量，而后再对被边缘轮廓分割的新图像块进行分类、处理：由于把图像边缘轮廓的大部分高频信息分解于边沿信息中，因此提高压缩比时不会丢失太多高频细节，减少了物体的边界噪声和可见的图块边界，从而在相同压缩比的前提下，更加保证了图像的视觉效果。文章中给出了此种方法的理论公式、推导过程以及整个实现过程，并通过实例比较了此方法与二维离散余弦变换在图像压缩中的性能差异。     

昆仑山口西8.1级地震前青藏块体边界断层异常活动

系统分析了青藏块体边界断层的形变资料，研究了断层活动的动态过程及空间分布。结果表明，昆仑山口西8．1级地震前孕震影响范围达到青藏块体的周边地区；发震断层所在的构造带震前断层活动最为剧烈；加强对构造块体断层整体活动的宏观动态比较和分析，有助于判定未来强震发生的危险地段；震后应力将转移并集中到西秦岭构造带及其邻近地区。     

1966年以来华北地区一系列七级大震破裂过程的数值模拟

用非连续变形分析方法(DDA+FEM)数值模拟，在华北地区各地块相互制约的块体系统环境中，地块边界断层上发生1966年邢台地震、 1969年渤海地震、 1975年海城地震、 1976年唐山地震等不同类型破裂模式大震的破裂过程. 数值模拟结果给出每个大震释放的主应力场，最大剪应力变化等值线图，地震前后位移变化矢量图，发震断层滑移随时间变化以及走滑错距和应力降等震源参数. 这些结果与地震的震源机制，用地震波资料研究得到的震源参数,宏观等震线,地表观测的水平位移矢量图基本一致. 其中1969年渤海地震正交破裂模式的结果与宏观等震线及小震分布图像更接近. 1976年唐山地震复杂震源模式与该震早期余震分布图像更相符. 表明用DDA+FEM方法进行数值模拟研究，能较好地模拟地震破裂过程.     

鄂豫皖交界地区地震地质背景与中强地震复发特征的研究

鄂豫皖交界地区位于东大别山西部，历史中强地震(M≥43/4)主要发生在土地岭-落儿岭及商城-麻城断裂带上，且“互动”和“连动”的特征较为显著。根据这一特征，在研究东大别山区域地质、地壳结构、断裂活动及地震构造应力场特征的基础上，可将鄂豫皖交界地区的中强地震作为秦岭-大别山活动地块中的次级地块的整体活动来看待。该区历史地震活动整体表现为丛集特征，而主要发震断层(土地岭-落儿岭断裂)的历史地震活动则具有相对较好的准周期性。地震复发周期研究提示，该地块近期发生M≥5．0左右地震的危险性较大，而霍山-六安地区为未来发生中强地震的主要危险区。     

川北地区岩石反射谱波特征

四川北部地区既有岩浆岩、变质岩构成的前震旦系结晶变质基底,又有震旦纪以后的沉积盖层,岩石类型十分齐全。本文根据该区的120件岩(矿)石样品反射波谱测试结果,绘制了区内主要岩石类型典型波谱曲线,并对这些波谱曲线进行了初步分析,总结了主要岩石类型的波谱特征,这些岩石波谱特征在西南地区有一定的代表性。