Rock moisture content in the field and the laboratory and its relationship to mechanical weathering studies

Rock moisture content is a major control of mechanical weathering, particularly freeze-thaw, and yet almost no data exist from field situations. This study presents moisture content values for rocks, taken from a variety of positions and conditions, in the maritime Antarctic. Additional information regarding the amount of water the rock could take up, as observed from laboratory experiments, is also presented. The results show that the approaches used in simulation experiments, particularly that of soaking a rock for 24 hours, may produce exaggerated results. It was found that the saturation coefficient (S-value) was a good indicator of frost susceptibility (based on water content) but that the derivation of that value may underestimate the potential of some rocks. The distribution of moisture within rocks is seen as an important, but unkown, factor. The results of these field moisture contents suggest that for simulations of freeze-thaw or hydration to be meaningful then they should have rock water contents based on field observations.     

地震预报思路的再讨论

文中回顾了1974年提出的“块、带、源、兆、触、报”六字预报思路，并基于近20年来的研究对此进行了补充和深化。     

Performance Enhancement of Multiuser Passive Time Reversal Communication Based on Space-Time Block Coding

Reliable,with high data rate,acoustic communication in time-varying,multipath shallow water environment is a hot research topic recently.Passive time reversal communication has shown promising results in improvement of the system performance.In multiuser environment,the system performance is significantly degraded due to the interference among different users.Passive time reversal can reduce such interference by minimizing the cross-correlated version of channel impulse response among users,which can be realized by the well-separated users in depth.But this method also has its shortcomings,even with the absence of relative motion,the minimization sometimes may be impossible because of the time-varying environment.Therefore in order to avoid the limitation of minimizing the cross-correlated channel function,an approach of passive time reversal based on space-time block coding (STBC) is presented in this paper.In addition,a single channel equalizer is used as a post processing technique to reduce the residual symbol interference.Experimental results at 13 kHz with 2 kHz bandwidth demonstrate that this method has better performance to decrease bit error rate and improve signal to noise ratio,compared with passive time reversal alone or passive time reversal combined with equalization.     

锁块式水下采油树井口连接器性能分析

水下采油树井口连接器是连接采油树和井口的关键设备,对深海水下勘探开发及采油树的安装连接具有不可或缺的重要意义。以一种锁块式水下连接器为例,介绍其结构组成和工作原理,通过有限元建立连接器的三维模型,分析连接器在下放安装工况、连接锁紧工况、正常生产工况和钻完井工况下的连接性能,得出井口与采油树本体接触面作用力、VX钢圈接触应力和锁块受力情况随外部载荷的相互关系。结果表明,VX钢圈在整个过程中都能够保持良好密封,井口与采油树本体接触面未发生分离,弯矩对连接器连接性能影响很大,在额定弯矩作用时连接器部分锁块已发生弹塑性失效。     

稀少控制点异轨立体卫星影像区域网平差应用研究

结合PixelGrid软件应用,分析了异轨立体卫星影像区域网平差原理。在稀少控制点情况下,针对大范围高分辨率立体卫星遥感影像的区域网平差处理,提出了5种解决方案,并进行了实验分析,得出明确的结论。     

南海东北部陆坡与恒春海脊天然气水合物分布的地震反射对比

经过对"探宝号"调查船在2001年8月在南海东北部陆坡及台湾南部恒春海脊海域采集的多道地震剖面资料进行的地震反射波数据分析、研究和解释,结果表明:(1)南海东北部陆坡段区域和台湾南部恒春海脊海域地震剖面上均显示有被作为天然气水合物存在标志的BSR,但两区域构造成因、形式和相关地质环境的不同造成了此两处的天然气水合物成因及过程的不同.(2)南海东北部陆坡区域的水合物形成与该区广泛发育的断裂带、滑塌构造体及其所形成的压力场屏蔽环境有关,而台湾南部恒春海脊海域的天然气水合物的形成则与马尼拉海沟俯冲带相关的逆冲推覆构造、增生楔等及其所对应的海底流体疏导体系有关.(3)南海陆缘区域广泛发育有各种断裂带、滑塌构造体、泥底辟、俯冲带、增生楔等,且温压环境合适,是天然气水合物矿藏极有可能广泛分布的区域.     

Simulation of paleotectonic stress fields and quantitative prediction of multi-period fractures in shale reservoirs: A case study of the Niutitang Formation in the Lower Cambrian in the Cen'gong block,South China

Reservoirs where tectonic fractures significantly impact fluid flow are widespread. Industrial-level shale gas production has been established from the Lower Cambrian Niutitang Formation in the Cen'gong block, South China; the practice of exploration and development of shale gas in the Cen'gong block shows that the abundance of gas in different layers and wells is closely related to the degree of development of fractures. In this study, the data obtained from outcrop, cores, and logs were used to determine the developmental characteristics of such tectonic fractures. By doing an analysis of structural evolution, acoustic emission, burial history, logging evaluation, seismic inversion, and rock mechanics tests, 3-D heterogeneous geomechanical models were established by using a finite element method (FEM) stress analysis approach to simulate paleotectonic stress fields during the Late Hercynian—Early Indo-Chinese and Middle-Late Yanshanian periods. The effects of faulting, folding, and variations of mechanical parameters on the development of fractures could then be identified. A fracture density calculation model was established to determine the quantitative development of fractures in different stages and layers. Favorable areas for shale gas exploration were determined by examining the relationship between fracture density and gas content of three wells. The simulation results indicate the magnitude of minimum principal stress during the Late Hercynian — Early Indo-Chinese period within the Cen'gong block is −100 ∼ −110 MPa with a direction of SE-NW (140°–320°), and the magnitude of the maximum principal stress during the Middle-Late Yanshanian period within the Cen'gong block is 150–170 MPa with a direction of NNW-SSE (345°–165°). During the Late Hercynian — Early Indo-Chinese period, the mechanical parameters and faults play an important role in the development of fractures, and fractures at the downthrown side of the fault are more developed than those at the uplifted side; folding plays an important role in the development of fractures in the Middle-Late Yanshanian period, and faulting is a secondary control. This 3-D heterogeneous geomechanical modelling method and fracture density calculation modelling are not only significant for prediction of shale fractures in complex structural areas, but also have a practical significance for the prediction of other reservoir fractures.     

Sedimentary control on the formation of a multi-superimposed gas system in the development of key layers in the sequence framework

Based on core observations, well logs and test results of siderite-bearing mudstone from the Benxi Formation to the Member 2 of the Shanxi Formations in the Linxing block, northeastern Ordos Basin, a logging identification model for siderite-bearing mudstone (key layer) was established. The porosity characteristics and sealing property were quantitatively evaluated by logging data. Sedimentary control on the formation of multi-superimposed gas-bearing system in the development of key layers in the sequence framework was also discussed. The results showed that the siderite-bearing mudstone has obvious logging response characteristics, e.g., high photoelectric absorption cross-section index (PE), high density (DEN), high amplitude natural gamma ray (GR), low acoustic (AC), low resistivity (M2RX) and low neutron porosity (CNCF). The quantitatively evaluated results of the porosity characteristics and sealing property for the key layer showed that the key layer has the characteristics of low porosity (with an average of 1.20 percent), low permeability (with an average of 2.29 × 10⁻⁸μm²), and high breakthrough pressure (with an average of 12.32 MPa) in the study area. This layer acts as an impermeable gas barrier in a multi-superimposed gas system. The results also indicated that the material composition of the multi-superimposed gas-bearing system can be established by the sequence stratigraphic framework. The sedimentary evolution results in a cyclic rhythm of material composition vertically. The spatial distribution of the corresponding transgressive event layer near the maximum flooding surface (MFS) in the sequence framework restricts the spatial distribution of the key layer with high breakthrough pressure and low porosity, which constitutes the gas-bearing system boundary. The siderite-bearing mudstone formed near the MFS in the second-order sequence and constitutes a stable comparison of the first-order gas-bearing system boundary, which has a wide range of regional distribution and stable thickness. The siderite-bearing mudstone formed near the MFS in the third-order sequence is often incompletely preserved due to the late (underwater) diversion channel erosion and cutting. This layer forms the coal-bearing reservoirs, which we termed as a second-order gas-bearing system in adjacent third-order sequences to form a uniform gas-bearing system.     

Experimental analysis of breakwater stability with antifer concrete block

Armor is a pavement made of erosion-resistant materials like a stone or concrete that is constructed to protect breakwater, coasts, and other coastal line features against erosion. These armors are a kind of protective layer made of stone or concrete, used in breakwater constructions or coastal lines, arrayed with specific regular or irregular pattern on the breakwater or the coast. The antifer concrete blocks have almost cubic form, often changed into frustum by adding inclined plates to their sides. One of the most important advantages of these armors is their diversified regular and irregular placement patterns. In this study, using the physical modeling and different tests, the stability level of antifer concrete blocks was evaluated considering the decrease of the armor weight. Results of this study show that by a 10% decrease in the block weight, the failure graph slope is increased and the damage is intensified.     

华南壳幔结构与动力学的宽频地震观测研究

了解华南各岩石圈块体壳幔结构和各向异性方面的差异是揭示华南深部构造演化的基础。本文利用布设于华南的两条宽频地震测线观测数据,采用多种地震学方法对华南的地壳上地幔结构和各向异性进行了研究。接收函数结果表明,华南地区地壳厚度和岩石圈厚度都较薄,地壳厚度自东南沿海向西北内陆增厚,扬子克拉通的泊松比(波速比)低于华夏块体,表明扬子克拉通地壳较华夏块体更偏长英质。约北纬29°以北的扬子克拉通地幔转换带厚度明显增厚,可能是由地幔转换带底部停滞的冷的古太平洋板片或中生代克拉通碰撞残留造成的。层析成像结果显示华南上地幔具有很强的横向差异性,上地幔中的强烈低速异常体可能对应了晚中生代发生广泛岩浆作用时的岩浆房和岩浆通道。台湾下方的上地幔存在南北横向差异明显的高速异常,分别对应台湾南部向东俯冲的欧亚板块及台湾北部向北俯冲的菲律宾海板块。俯冲的欧亚板块在台湾南部是连续的,而在台湾中北部,由于与菲律宾海板块的相互作用,俯冲的欧亚板块被折断。剪切波分裂结果显示,以江绍断裂为界,华夏块体与扬子克拉通的岩石圈地幔各向异性存在明显的横向变化,表明两者的构造演化过程有显著差异。