Seismic retrofitting of braced frame buildings by RC rocking walls and viscous dampers

A design procedure for seismic retrofitting of concentrically and eccentrically braced frame buildings is proposed and validated in this paper. Rocking walls are added to the existing system to ensure an almost uniform distribution of the interstorey displacement in elevation. To achieve direct and efficient control over the seismic performance, the design procedure is founded on the displacement‐based approach and makes use of overdamped elastic response spectra. The top displacement capacity of the building is evaluated based on a rigid lateral deformed configuration of the structure and on the ductility capacity of the dissipative members of the braced frames. The equivalent viscous damping ratio of the braced structure with rocking walls is calculated based on semi‐empirical relationships specifically calibrated in this paper for concentrically and eccentrically braced frames. If the equivalent viscous damping ratio of the structure is lower than the required equivalent viscous damping ratio, viscous dampers are added and arranged between the rocking walls and adjacent reaction columns. The design internal forces of the rocking walls are evaluated considering the contributions of more than one mode of vibration. The proposed design procedure is applied to a large set of archetype braced frame buildings and its effectiveness verified by nonlinear dynamic analysis.     

Numerical study on factors that influence the in‐plane drift capacity of unreinforced masonry walls

Displacement‐based assessment procedures require as input reliable estimates of the deformation capacity of all structural elements. For unreinforced masonry (URM) walls, current design codes specify the in‐plane deformation capacity as empirical equations of interstory drift. National codes differ with regard to the parameters that are considered in these empirical drift capacity equations, but the inhomogeneity of datasets on URM wall tests renders it difficult to validate the hypotheses with the currently available experimental data. This paper contributes to the future development of such empirical relationships by investigating the sensitivity of the drift capacity to the shear span, the aspect ratio, the axial load ratio, and the size of the wall. For this purpose, finite element models of URM walls are developed in Abaqus/Explicit and validated against a set of experimental results. The results show that the axial load ratio, the shear span, and the wall size are among the factors that influence the drift capacity the most. Empirical equations are mainly derived from test results on small walls, and the numerical results suggest that this can lead to a significant overestimation of the drift capacity for larger walls.     

In‐plane quasi‐static cyclic tests of nonstructural lightweight steel drywall partitions for seismic performance evaluation

An experimental program was performed for evaluating the seismic response and fragilities of nonstructural lightweight steel drywall partitions, also considering the interaction with structural elements and other nonstructural building components, ie, outdoor façade walls. Therefore, in‐plane quasi‐static reversed cyclic tests were carried out on 8 specimens of indoor partition walls infilled in a frame and on 4 specimens of indoor partition walls connected at its ends with transversal outdoor façade walls. Constructive parameters under investigation include type of connections used for connecting the indoor partition walls to the surrounding elements, stud spacing, type of sheathing panels, and type of jointing finishing. The effect of the constructive parameters on the lateral response in secant stiffness and strength is examined. Furthermore, the main damage phenomena observed during the tests are reported and associated to 3 damage limit states distinguished for the required repair level for the tested partition walls. Fragility curves are used for the experimental assessment of seismic fragility of the tested specimens, in accordance with the interstorey drift limits required by the European code. Finally, the quantitative estimation of the repair action costs starting from the damage observation is also developed. The obtained results could be considered a starting point for developing the in‐plane seismic design assisted by testing of lightweight steel drywall partition walls.     

The effective stiffness of modern unreinforced masonry walls

Code design of unreinforced masonry (URM) buildings is based on elastic analysis, which requires as input parameter the effective stiffness of URM walls. Eurocode estimates the effective stiffness as 50% of the gross sectional elastic stiffness, but comparisons with experimental results have shown that this may not yield accurate predictions. In this paper, 79 shear‐compression tests of modern URM walls of different masonry typologies from the literature are investigated. It shows that both the initial and the effective stiffness increase with increasing axial load ratio and that the effective‐to‐initial stiffness ratios are approximately 75% rather than the stipulated 50%. An empirical relationship that estimates the E‐modulus as a function of the axial load and the masonry compressive strength is proposed, yielding better estimates of the elastic modulus than the provision in Eurocode 6, which calculates the E‐modulus as a multiple of the compressive strength. For computing the ratio of the effective to initial stiffness, a mechanics‐based formulation is built on a recently developed analytical model for the force‐displacement response of URM walls. The model attributes the loss in stiffness to diagonal cracking and brick crushing, both of which are taken into account using mechanical considerations. The obtained results of the effective‐to‐initial stiffness ratio agree well with the test data. A sensitivity analysis using the validated model shows that the ratio of effective‐to‐initial stiffness is for most axial load ratios and wall geometries around 75%. Therefore, a modification of the fixed ratio of effective‐to‐initial stiffness from 50% to 75% is suggested.     

Probabilistic development of shear strength model for reinforced concrete squat walls

In order to reconcile the larger scatter and avoid the biased estimate from deterministic predictions for the shear strength of reinforced concrete (RC) squat structural walls, a probabilistic shear strength model is developed in this paper based on the strut‐and‐tie model and the generalized likelihood uncertainty estimation (GLUE) method. The strut‐and‐tie model is used to derive an appropriate function form for the probabilistic shear strength model, where four unknown model parameters (e.g. k₁, k₂, k₃ and k₄) are defined carefully to guarantee them having a clear physical‐based meaning so that the corresponding prior distribution ranges can be specified reasonably. Then, the GLUE method is adopted to estimate the posterior cumulative distribution of k₁, k₂, k₃ and k₄ with an available experimental database. Furthermore, to demonstrate the stability of the estimated posterior cumulative distribution, the sensitivity of three major aspects in GLUE method is investigated. Finally, based on the estimated cumulative distribution of k₁, k₂, k₃ and k₄, the developed probabilistic shear strength model is simplified as a mean prediction model and a standard deviation prediction model for facilitate using in engineering practice. Therefore, with the developed probabilistic shear strength model, not only can the squat structural walls be designed in confidence, but the accuracy of those deterministic predictions can be evaluated in a probabilistic manner. Copyright © 2016 John Wiley & Sons, Ltd.     

A methodology for defining seismic scenario‐structure‐based limit state criteria for rc high‐rise wall buildings using net drift

As a result of population growth and consequent urbanization, the number of high‐rise buildings is rapidly growing worldwide resulting in increased exposure to multiple‐scenario earthquakes and associated risk. The wide range in frequency contents of possible strong ground motions can have an impact on the seismic response, vulnerability and limit states definitions of RC high‐rise wall structures. Motivated by the pressing need to derive more accurate fragility relations to be used in seismic risk assessment and mitigation of such structures, a methodology is proposed to obtain reliable, Seismic Scenario‐Structure‐Based (SSSB) definitions of limit state criteria. A 30‐story wall building, located in a multi‐seismic scenario study region, is utilized to illustrate the methodology. The building is designed following modern codes and then modeled using nonlinear fiber‐based approach. Uncertainty in ground motions is accounted for by the selection of forty real earthquake records representing two seismic scenarios. Seismic scenario‐based building local response at increasing earthquake intensities is mapped using Multi‐Record Incremental Dynamic Analyses (MRIDAs) with a new scalar intensity measure. Net Inter‐Story Drift (NISD) is selected as a global damage measure based on a parametric study involving seven buildings ranging from 20 to 50 stories. This damage measure is used to link local damage events, including shear, to global response under different seismic scenarios. While the study concludes by proposing SSSB limit state criteria for the sample building, the proposed methodology arrives at a reliable definition of limit state criteria for an inventory of RC high‐rise wall buildings under multiple earthquake scenarios. Copyright © 2016 John Wiley & Sons, Ltd.     

Response of infilled frames using pseudo-dynamic experimentation

An accurate and practical testing technique to study seismic performance of multi-storey infilled frames is formulated. This technique is based on the pseudo-dynamic method which can provide an acceptable approximation of the dynamic performance of structures under the influence of earthquake excitation. The pseudo-dynamic experimental technique is outlined and applied for testing a two-bay, two-storey gravity load designed steel frame infilled with unreinforced concrete block masonry walls. From the discussion of the results, the dynamic performance of the tested structure is assessed. © 1998 John Wiley & Sons, Ltd.     

Wave interactions with multiple-row curtainwall-pile breakwaters

In this study, a mathematical model has been developed that can compute various hydrodynamic characteristics of a multiple-row curtainwall-pile breakwater. To examine the validity of the developed model, laboratory experiments have been conducted for double- and triple-row breakwaters with various combinations of drafts of curtain walls, porosities between piles, and distances between rows. Comparisons between measurement and prediction show that the mathematical model adequately reproduces most of the important features of the experimental results. As a whole, the transmission coefficient decreases with an increase in relative water depth, whereas the reflection coefficient, normalized run-up and force exhibit an opposite trend in their variations. With fixed values of the draft of the curtain wall and the porosity of lower perforated part of the first row of a double-row breakwater, as these values of the second row increase and decrease, respectively, the transmission coefficient decreases, as expected. On the other hand, their effects on wave reflection, run-up, and wave force change with the relative depth. As for the distance between the rows, the transmission coefficient becomes a maximum when it is about one half of the wave length, suggesting that this condition should be avoided to achieve the advantage of the breakwater in reducing wave transmission. It is shown that for prototype breakwaters, on an average, the transmission coefficient would be smaller than 0.3 for wave periods less than 6.0 s, and it would be about 0.45 even for the wave period of 9.0 s, although there would be a variation depending on the geometry of the breakwater. It is also shown that wave transmission is significantly reduced by multiple-row breakwaters compared with a single-row breakwater, while the difference between double-row and triple-row breakwaters is marginal. Finally, engineering monograms are provided for double-row breakwaters to be used in practical engineering applications of the breakwaters.     

没有围墙的GIS实验室

美国前副总统戈尔认为数字地球可以变成一个“没有围墙的实验室”,那么什么是“没有围墙的实验室”,如何建设 ?本文在对当前数字地球研究成果分析的基础上 ,指出“没有围墙的实验室”的核心就是“没有围墙的 GIS实验室”.