中国陆架海绿石分布特征及其意义

本文根据实际资料,简要概括了中国大陆架海绿石的分布规律和形成环境。海绿石的富集区与氧化环境,粗粒沉积和残留沉积区相一致。该研究为恢复古沉积环境提供了依据。     

区域站和基准站气溶胶的分析

文章讨论了秋季（1994年10月）和冬季（1995年1月）在中国西部青海省共和县瓦里关山（36°17′N,100°54′E,海拔3816 m）基准站和中国东北黑龙江省五常县的龙凤山（44°44′N,127°36′E,海拔331 m）及中国东南沿海的浙江省临安县的横畈乡（30°18′N,119°44′E,海拔131 m）两个区域本底站（上述3站均属WMO）所采集的气溶胶样品的质量浓度、可溶性离子浓度的时空分布特征和变化规律。初步得出：气溶胶质量浓度和可溶性离子浓度以临安为最高。其次是龙凤山,而瓦里关山为最低     

Density-dependent dispersion in heterogeneous porous media Part I: A numerical study

In this paper, we describe carefully conducted numerical experiments, in which a dense salt solution vertically displaces fresh water in a stable manner. The two-dimensional porous media are weakly heterogeneous at a small scale. The purpose of these simulations, conducted for a range of density differences, is to obtain accurate concentration profiles that can be used to validate nonlinear models for high-concentration-gradient dispersion. In this part we focus on convergence of the computations, in numerical and statistical sense, to ensure that the uncertainty in the results is small enough.Concentration variances are computed, which give estimates of the uncertainty in local concentration values. These local variations decrease with increasing density contrast. For tracer transport, obtained longitudinal dispersivities are in accordance with analytical findings. In the case of high-density contrasts, stabilizing gravity forces counteract the growth of dispersive fingers, decreasing the effective width of the transition zone. For small log-permeability variances, the decrease of the apparent dispersivity that is found is in agreement with laboratory results for homogeneous columns.     

基于BSR的AVO正演估算水合物含量方法的研究

水合物地震属性研究的一个基本目标是水合物/游离气含量的估算. 这项工作的难度体现在地震反演具有多解性. 这项工作涉及到地震数据的精细处理、速度分析和BSR界面AVO分析等多个具体环节. 本文继承前人的有关成果,尝试进行了水合物/游离气含量估算方法的研究. 以区域地质、地震和化探等多元方法信息为基础,以定性推断BSR以及BSR界面AVO性质为导向,通过AVO正演模型方法,半定量（或定量）地估算BSR界面上与下地层中水合物/游离气（或水合物/水合物）的含量. 运用这种方法,结合海上有利于天然气水合物的E研究区某测线地震资料,尝试估算了BSR界面之上和之下介质中水合物/游离气的含量.     

Two-phase hydrodynamic and sediment transport modeling of wave-generated sheet flow

This numerical investigation was carried out to advance mechanistic understanding of sediment transport under sheet flow conditions. An Euler–Euler coupled two-phase flow model was developed to simulate fluid–sediment oscillatory sheet flow. Since the concentration of sediment particles is high in such flows, the kinematics of the fluid and sediment phases are strongly coupled. This model includes interaction forces, intergranular stresses and turbulent stress closure. Each phase was modeled via the Reynolds-Averaged Navier–Stokes equations, with interphase momentum conservation accounting for the interaction between the phases. The generation and transformation of turbulence was modeled using the two-equation k–ε$k''–''\epsilon$ turbulence model. Concentration and sediment flux profiles were compared with experimental data for sheet flow conditions considering both symmetric and asymmetric oscillatory flows. Sediment and fluid velocity variations, concentration profiles, sediment flux and turbulence parameters of wave-generated sheet flow were studied numerically with a focus on sediment transport characteristics. In all applications, the model predictions compared well with the experimental data. Unlike previous investigations in which the flow is driven by a horizontal pressure gradient, the present model solves the Navier–Stokes equations under propagating waves. The model’s ability to predict sediment transport under oscillatory sheet flow conditions underscores its potential for understanding the evolution of beach morphology.     

Verification of significant wave representation method

The significant wave representation method is the simplest method for computing the transformation of significant wave height across-shore. However, many engineers are reluctant to use this method because many researchers have pointed out that the method possibly contains a large estimation error. Nevertheless, Rattanapitikon et al. [Rattanapitikon, W., Karunchintadit, R., Shibayama, T., 2003. Irregular wave height transformation using representative wave approach. Coastal Engineering Journal, JSCE 45(3), 489–510.] showed that the wave representation method could be used to compute the transformation of root mean square wave heights. It may also be possible to use it for computing the significant wave height transformation. Therefore, this study was carried out to examine the possibility of simulating significant wave height transformation across-shore by using the significant wave representation method. Laboratory data from small- and large-scale wave flumes were used to calibrate and examine the models. Six regular wave models were applied directly to irregular waves by using the significant wave height and spectral peak period. The examination showed that three regular wave models (with new coefficients) could be used to compute the significant wave height transformation with very good accuracy. On the strength of both accuracy and simplicity of the three models, a suitable model is recommended for computing the significant wave height transformation. The suitable model was also modified for better predictions. The modified model (with different coefficients) can be used to compute either regular wave height or significant wave height transformation across-shore.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

An Analytical Model For Threshold Crossing Rates Of Concentration Fluctuations In Dispersing Plumes

A simple analytical model is developed for the meanupcrossing rate of plume concentration fluctuations assuming that thisprocess can be well approximated by a lognormal process. The resultingexpression requires only the specification of the in-plume fluctuationintensity and in-plume Taylor micro-time scale and, hence, does notexplicitly involve the joint probability density function of theconcentration and its derivative. The analytical model provides agood fit to some field measurements of the mean upcrossing rate ina dispersing plume.     

Vertical concentration profile of nonuniform sediment

A new formula for the concentration profile of nonuniform sediment is derived using the diffusion differential equation with equilibrium bed concentration.The interaction coefficient for nonuniform sediment particles as a function of both relative diameter and geometric standard deviation of nonuniform sediment is taken into account in the settling velocity.The diffusion coefficient is obtained from the logarithmic velocity profile.This new formula possesses several advantages as follows:(1)avoids theoretical defect of the Rouse formula,which states that the sediment concentration is infinite at the bottom and zero at the water surface.(2)suitable for an arbitrary fraction of nonuniform sediment,and(3)easy to apply with a simple form.The formula yields less difference among concentration profiles for various particles than that for uniform sediment and reveals the lawfor fractional concentration distribution of nonuniform sediment.The calculated concentration agrees well with the measured data from the Yangtze River.     

渤海湾及其附近海域沉积物中Cu,Pb,Zn,Cd环境背景值的研究

根据渤海湾及其毗邻河口区10柱岩芯样细颗粒（＜0．063mm）（GF 1983－1985年采集）中重金属含量特点，结合^216Pb年代学编年资料，用未受人类影响沉积层中元素含量，藉统计学方法获得渤海湾岩芯样中Cu，Pb，Zn，Cd的分布类型，并根据各区重金属的含量水平，用t检验法获得了渤海湾Cu，Pb，Zn，Cd的环境背景值。