BED FORMS AND RESISTANCE PROPERTIES OF LIGHT-WEIGHT BED MATERIAL

I. INTRODUCTIONResistance to flow in alluvial streams is one of the crucial problems in fluvial hydraulics. Despite that large amount of studies have been conducted for centuries, no perfectmethod describing and calculating the resistance to flow in alluvial streams is availablehll now. Investigation on bed forms and resistance properties of light--weight bed materials is even more scarce. USWES (1936) has conducted systematic experiments onlight--weight materials in a flume & m long an…     

Velocity distribution in a gradually accelerating free surface flow

This study investigates the interaction of the vertical velocity v and the streamwise velocity u in a gradually accelerating flow. The analytical result shows that the momentum of uv driven by the mean velocities in a non-uniform flow is not negligible. This additional momentum directly results in the concave profiles of Reynolds shear stress in gradually accelerating flows, a departure from the expected linear profile. Consequently, this momentum causes the maximum velocity to be located below the free surface, i.e., the dip-phenomenon. This paper investigated the interactions of the Reynolds shear stress, non-zero vertical velocity and dip-phenomenon, it is found that the non-zero vertical velocity causes the dip-phenomenon. The approach is tested using the experimental data of Song and others, and good agreements between the predicted and measured velocity profiles have been achieved.     

Seismicity of the northernmost part of the Red Sea (1995–1999)

Seismicity in the northernmost part of the Red Sea has been studied using data from Hurghada Seismological Network in addition to readings from the existing neighbouring networks. Relocated events in addition to data from national centers are used to obtain a complete and true picture for the seismicity of the area. The spatial distribution of earthquakes defines three earthquake zones in the Gulf of Aqaba and three zones at the entrance of the Gulf of Suez and southern tip of Sinai Peninsula. The thermal activity and the triple junction nature control the activity in this area. The activity defines also an active trend extending from the southern tip of Sinai Peninsula to the median zone of the Red Sea. The seismicity of this trend is probably related to the active spreading zone associated with the opening of the Red Sea. The b-values are derived for the entrance areas of the two gulfs and for Gulf of Aqaba. Values of b are 1.35 for the triple junction region, 1.13 for the activity before the 22 November 1995 Gulf of Aqaba mainshock and 1.25 for the aftershocks of this event.     

几内亚红粘土的工程地质特征及成因探讨

介绍了几内亚体育场岩土层结构和粘土的工程地质特征,将其与国内红粘土进行了比较,认为是属于基性岩风化而形成的红粘土,并探讨了该红粘土的形成过程。从元素迁移规律着手,分析了形成该地剖面上特殊的岩土层序的形成原因,从化学成份和分子结构着手分析了该粘土物理力学性质的形成原因。进而分析了几内亚红粘土工程地质评价中应注意的问题。     

Geochemical characteristics of crude oils from Well Zheng-1 in the Junggar Basin, Xinjiang, China

Well Zheng-1 is located in the combined area of the central uplift and the north Tianshan piedmont depression in the Junggar Basin. Two oil-bearing beds are recognized at 4788–4797 m of the Lower Cretaceous Tugulu Formation (K1tg) and 4808.5–4812.5 m of the Lower Jurassic Sangonghe Formation (J1s). The geochemical characteristics of family composition, carbon isotopic composition, saturated hydrocarbons, sterane and terpane biomarkers and carotane of two crude oils are described in this paper. The results show that the geochemical characteristics of the two crude oils are basically similar to each other, indicating they were all derived mainly from the high mature, brine, algae-rich lake facies sediments. Oil-source correlation revealed that crude oils of the two beds were derived mainly from the source rocks of Permian and mixed by the oil derived from the source rocks of Jurassic and Triassic. This is consistent with the geological background with several sets of source rocks in the area studied.     

Geological analysis and FT dating of the large-scale right-lateral strike-slip movement of the Red River fault zone

Tectonically, the large-scale right-lateral strike-slip movement along the Red River fault zone is char-acterized at its late phase with the southeastward extension and deformation of the Northwestern Yunnan normal fault depression on its northern segment, and the dextral shear displacement on its central-southern segment. Research of the relations between stratum deformation and fault movement on the typical fault segments, such as Jianchuan, southeast Midu, Yuanjiang River, Yuanyang, etc. since the Miocene Epoch shows that there are two times dextral faulting dominated by normal shearing occurring along the Red River fault zone since the Miocene Epoch. The fission track dating (abbrevi-ated to FT dating, the same below) is conducted on apatite samples collected from the above fault segments and relating to these movements. Based on the measured single grain’s age and the con-fined track length, we choose the Laslet annealing model to retrieve the thermal history of the samples, and the results show that the fault zone experienced two times obvious shear displacement, one in 5.5 ± 1.5 MaBP and the other in 2.1± 0.8 MaBP. The central-southern segment sees two intensive uplifts of mountain mass in the Yuanjiang River-Yuanyang region at 3.6―3.8 MaBP and 1.6―2.3 MaBP, which correspond to the above-mentioned two dextral normal displacement events since the late Miocene Epoch.     

对门源盆地"红层"形成时代的新认识

门源盆地位于青藏高原东北缘北祁连山腹地,为狭长的新生代走滑拉分山间宽谷盆地。其中充填一厚约407~960 m、干旱气候条件下的河湖相沉积"红层",长期以来各项研究工作均未能于其中采获任何生物化石。因此,尽管各家均认同其属"第三纪"无疑,但仍对其确切时代存在着较大的争论,而对其时代的确定有助于正确认识门源盆地形成时的构造背景,具有较为重要的意义。通过区域地层对比、"红层"形成气候条件与南侧西宁盆地及北邻酒泉—张掖盆地古气候环境所作的对比,深入探讨认为其时代属中中新世,并初步分析了门源盆地形成的新构造运动大陆动力学机制背景。     

Experimental study on the effects of artificial bed roughness on turbidity currents over abrupt bed slope change

A series of experimental observations are presented in the current study to discuss the effects of artificial bed roughness on the turbidity current flowing in a rectangular channel with an abrupt change in bed slope.For this purpose,two different types of elements,sinusoidal and trapezoidal,with various heights and arrangements are considered as artificial bed roughness.A Vectrino velocity meter was used to measure the velocity and sediment concentration profiles.The effects of inlet sediment concentration on front velocity,body velocity,unit discharge,sediment concentration,and suspended load transport rate also were investigated.Accurate equations were developed for estimation of the velocity of a turbidity current over smooth and rough beds.The unexpected experimental results showed that unlike the effect of roughness height,a change in the roughness arrangement has no significant influence on the velocity of a turbidity current.Also,the effect of bed roughness on the front velocity of a denser current is more significant.     

Influence of diversion angle on water and sediment flow into diversion channel

Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems. Diversion channels are often constructed perpendicular to the main river. In this study, the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge. A physical model with movable bed was used to simulate water and sediment flow with five diversion angles (θ) between (30°–90°). Moreover, three bed width ratios (B_r) (the relation between diversion to main channel bed width) between 30% and 50% and five total discharges between (7.25 L/s to 12.25 L/s) were considered for each case of (θ). The results showed, up to 10%, increasing in proportion discharge ratios for 30 and 45 diversion angles compared with 90° diversion angle. The results also showed that the lowest diversion sediment concentration was provided by the (θ) of 30°. Across all scenarios, the average proportion concentration reduction was 64%, compared with 90° diversion angle. Closer observation of the diversion system mechanism confirmed that decreased (θ) result in decreased sediment concentrations in the diversion channels. In conclusion, the diversion channel water and sediment discharge could be effectively managed by changing the (θ) to 30° or 45° instead of 90°.     

High-resolution bispectrum speckle interferometry and two-dimensional radiative transfer modeling of the Red Rectangle

We present the first diffraction-limited K-band image of the Red Rectangle with 76 mas resolution, an H-band image with 75 mas resolution, and an RG 715 filter image ( 800 nm wavelength) with 78 mas resolution (corresponding to 25 AU for a distance of 330 pc). The H and K images were reconstructed from 6 m telescope speckle data and the RG 715 image from 2.2 m telescope data using the speckle masking bispectrum method. At all wavelengths the images show a compact, highly symmetric bipolar nebula, suggesting a toroidal density distribution of the circumstellar material. No direct light from the central binary can be seen as it is obscured by a dust disk or circumbinary torus. Our first high-resolution H−K color image of the nebula shows a broad red plateau of H−K≈ 2^m in the bright inner regions.The optical and near-infrared images and the available photometric continuum observations in a wide range of ultraviolet to centimeter wavelengths enabled us to model the Red Rectangle in detail using a two-dimensional radiative transfer code. Our model matches both the high-resolution images and the spectral energy distribution of this object very well, making the following picture much more certain. The central close binary system with a total luminosity of 3000 L is embedded in a very dense, compact circumbinary torus which has an average number density n_H ≈5×10¹² cm⁻³, an outer radius of the dense inner region of R≈30 AU (91 mas), and a ρ∝r⁻² density distribution. The full opening angle of the bipolar outflow cavities in our model is 70°. By comparing the observed and theoretical images, we derived an inclination angle of the torus to the line of sight of 7°±1°.The radiative transfer calculations show that the dust properties in the Red Rectangle are spatially inhomogeneous. The modeling confirms that the idea of large grains in the long-lived disk around the Red Rectangle (Jura et al., 1997 [ApJ, 474, 741]) is quantitatively consistent with the observations. In our models, unusually large, approximately millimeter-sized grains dominate the emission of the compact, massive torus. Models with smaller average grain sizes can possibly be found in future studies, for instance, if it turns out that the radio spectrum is not mainly caused by continuum dust emission. Therefore, the large grains suggested by our models require further confirmation by both new observations and radiative transfer calculations. Assuming a dust-to-gas ratio ρ_d/ρ_g of 0.005, the dense torus mass is 0.25 M. The model gives a lower limit of 0.0018 M, for the mass of the large particles, which produce a gray extinction of A≈ 28^m, towards the center. A much smaller mass of submicron-sized dust grains is presumably located in the polar outflow cavities, their conical surface layers, and in the outer low-density parts of the torus (where ρ∝r⁻⁴, in the region of 30 AUr 2000 AU corresponding to 0.^′′09–6^′′).