Thin-section analysis as a tool to aid identification of palaeoearthquakes on the “slow”, active Geleen Fault, Roer Valley Graben

We analyzed thin sections from two palaeoseismic trenches across the low-slip-rate Geleen Fault in the Belgian Maas River valley to help identifying the most recent large palaeoearthquake on this fault segment. In the first trench we sampled silty sediment below and above a prehistoric stone pavement that was supposedly at or near the surface at the time of the event, and subsequently thrown down. The samples below show a well-developed in situ argillic Bt soil horizon in parent sediment containing remnants of stratification, whereas the sediment above is a structureless colluvium reworked at least partly from Bt-horizon material. Below the stone pavement, we also found evidence of contorted stratification, which is in agreement with macroscopic observations of both the sediment and the stone pavement itself, and which is attributed to co-seismic soft-sediment deformation. In the second trench, we sampled a sequence of vaguely discernible soil horizons in the hanging-wall, interpreted as a buried soil profile (Bt, E, and possibly A horizons), overlain by a featureless deposit. Thin-section analysis supports the colluvial nature of the latter, and also provides evidence that both the base of this layer and the top of the poorly developed A horizon below have occupied a shallow position in a soil profile. A sample from the same depth in the footwall is composed of very different material. Instead of colluvium, we find patches of Bt soil, most likely representing the same pedogenic level as the in situ Bt horizon at larger depth in the hanging-wall, but displaced and subsequently degraded. Furthermore, thin sections confirm that vertical structures cutting this Bt horizon are sand dykes. These dykes could be traced macroscopically upward to the base of the colluvium. In both trenches, we have thus identified a stratigraphic boundary in the hanging-wall, close to the surface, separating an in situ soil below from colluvium above. We interpret this limit and the overlying colluvium as the event horizon and the colluvial wedge, respectively, of a surface-rupturing palaeoearthquake. In addition, in both cases we found evidence of soft-sediment deformation (related to liquefaction) contemporaneous with the event within the stratigraphic resolution.     

First seismic record for intra-arc strike-slip tectonics along the Liquiñe-Ofqui fault zone at the obliquely convergent plate margin of the southern Andes

A temporal seismic network recorded local seismicity along a 130 km long segment of the transpressional dextral strike-slip Liquiñe-Ofqui fault zone (LOFZ) in southern Chile. Seventy five shallow crustal events with magnitudes up to M_w 3.8 and depths shallower than 25 km were observed in an 11-month period mainly occurring in different clusters. Those clusters are spatially related to the LOFZ, to the volcanoes Chaitén, Michinmahuida and Corcovado, and to active faulting on secondary faults. Further activity along the LOFZ is indicated by individual events located in direct vicinity of the surface expression of the LOFZ. Focal mechanisms were calculated using deviatoric moment tensor inversion of body wave amplitude spectra which mostly yield strike-slip mechanisms indicating a NE–SW direction of the P-axis for the LOFZ at this latitude. The seismic activity reveals the present-day activity of the fault zone. The recent M_w 6.2 event near Puerto Aysén, Southern Chile at 45.4°S on April 21, 2007 shows that the LOFZ is also capable of producing large magnitude earthquakes and therefore imposing significant seismic hazard to this region.     

Anthropogenic affects on lake sedimentation process: a case study from Lake Sapanca, NW Turkey

Lake Sapanca in NW Turkey is a fault originated freshwater basin fed by seasonally variable flows of 15 streams. Considerations of lake–river interaction, supported by statistical measures of 47 bottom samples, suggest that sediment transport and deposition within the lake is controlled by two types of human constructed structures in addition to natural factors: (1) the dykes constructed in the front of streams, which feed the lake by strong flows, to prevent the filling of lakebed by coarse-grained sediments; (2) the constructed regulator on the outflowing Çarksuyu stream results in a higher sedimentation rate of clay-sized material on the NE corner of the lake, which is extraordinary in the shelf environment.     

A GPR study of subsidence-creep-fault processes in Morelia, Michoacán, Mexico

In 1983, inhabitants of the City of Morelia, Michoacán, Mexico, began to observe a series of differential settlements causing damages to constructions along linear trends parallel to a system of regional faults. The same phenomenon occurs in others cities of the Mexican Volcanic Belt (MVB), such as Celaya, Aguascalientes, and Querétaro, and is linked to a structurally controlled subsidence, caused by groundwater withdrawal, and the presence of geological faults. We define this subsidence type as Subsidence-Creep-Fault Processes (SCFP), based on the necessary elements for their generation, and we studied them through geophysical and geotechnical techniques. In Morelia, the geophysical investigations have been carried out using ground-penetrating radar (GPR). GPR profiles, perpendicular to the axis of the surface fault generated by the SCFP were carried out. The common-offset single-fold profiling was used, with a central frequency of 50 MHz. In all cases it has been possible to visualize a fault plane dividing two blocks, the presence of synthetic and antithetic faults, influence zones from 20 m to 40 m, and a maximum “net throw” of 4 m. Exploration trenches followed the same direction of the profiles obtained with GPR (perpendicular to the axis of the surface fault). These trenches exposed a fault plane dividing two blocks with different lithology, generating a maximum “net throw” of 4.40 m; as well they help in the determination of influence zones that varied from 14 m to 40 m.     

Geochronology of Pliocene volcanism in the Dzhavakheti Highland (the Lesser Caucasus). Part 1: Western part of the Dzhavakheti Highland

Isotopic-geochronological study of the Pliocene magmatic activity in western part of the Dzhavakheti Highland (northwestern region of the Lesser Caucasus) is carried out. The results obtained imply that the Pliocene magmatic activity lasted in this part of the highland approximately 2 million years from 3.75 to 1.75–1.55 Ma. As is established, the studied volcanic rocks correspond in composition mostly to K-Na subalkaline and more abundant normal basalts. Time constraints of main phases in development of basic volcanism within the study region are figured out. We assume that individual pulses of silicic to moderately silicic volcanism presumably took place in the Dzhavakheti Highland about 3.2 and 2.5 Ma ago.     

桃山铀矿田桃山断裂及其保矿作用

桃山铀矿田位于江西省中部,断裂构造发育,既有成矿构造,也有保矿构造,其中斜贯桃山矿田的桃山断裂即是一保矿构造,它形成于车免近时期,走向北东,倾向南东,右行正断,并具铰链断层性质,上盘地块掀斜下落,致使上盘成矿壳层向NW和NE倾斜,由于倾末端的侵蚀深度较小,保矿条件较好,加强这些地带的铀矿勘查和评价具有重要意义。     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

青藏高原北缘阿尔金走滑边界的侧向扩展——甘肃北山晚新生代走滑构造与地壳稳定性分析

对北山地区遥感影像和野外地质特征的分析表明,自阿尔金断裂带向NW方向依次出露三危山-双塔断裂、大泉断裂和红柳河断裂。这些断裂近于平行,且同为左行走滑断裂,具有相似的展布特征,空间走向均为NE40-50°,断裂系末端均发育“树枝状”分支断层．在断层夹块之间形成“多米诺”构造,构成了北山地区主要的构造样式。断层谷地沉积物分析和断层泥ESR年代学测试结果表明,三危山-双塔断裂形成于上新世（N2k）,大泉断裂形成于早更新世（1．2-1．5Ma）．而北山地区分支断层和次级断层的活动在400ka之后。对北山地区断裂构造几何学和年代学的研究表明．阿尔金断裂系晚新生代以来向NW方向的侧向扩展．是阿尔金走滑边界重要的生长方式。北山地区特殊的走滑构造组合样式．使该地区的构造变形难于在某条断层上聚集能量,而分散在若干条次级断层上的位移量又微乎其微,该地区成为“最稳定的活动区”。     

鲁中南隆起区第四纪晚期断裂活动特征

根据野外调查，并综合前人的研究资料，对鲁中南地区第四纪晚期断裂活动进行了分析，研究表明，鲁中南隆起区第四纪断裂活动具有时空不均匀性，主要表现为第四纪时期断层活动强度变化和断裂活动的群集性以及第四纪晚期断裂活动段分布的局限性上。对于鲁中南地区而言，活动断层可以分为中更新世中期（500kaBP)至晚更新世初期（90kaBP)活断层和晚更新世中、晚期至全新世早期活断层两类；其中前一类（主要是中更新世断裂）断裂数量较多，分布较为广泛，而晚更新世晚期以来的活动断裂段的数量较少，分布较局限。它们对地震的控制能力不同，前者可控制5．5级左右的地震，而后一类可控制6－7级地震的发生。     

黄河三角洲造陆速率对夏季风强度变化和人类活动的响应

以夏季风强度指数和年均气温作为反映气候变化的指数,以人类净引水量和流域水土保持面积作为反映人类活动变化的指标,并以黄河流域为例,研究了三角洲造陆对气候变化和人类活动的响应.研究表明,夏季风强度指数的变化可分为三个阶段:(1)在1951~1963年夏季风强度指数呈持续增强的变化趋势;(2)在1963~1965年夏季风强度指数呈突变式减弱;(3)在1966~2000年夏季风强度指数保持在较低的水平上,且呈缓慢减弱的趋势.年降水量变化与夏季风强度指数有同步关系.从1950到1970年的年均温度在波动中略呈降低趋势,然而从1970年开始年均温度在波动中具有持续上升的趋势.气候变化会导致入海泥沙通量的变化,并可能进一步导致三角洲造陆速率的变化.黄河三角洲造陆速率、入海泥沙通量在1952~1964年均呈增大的趋势,1964年后则呈减小的趋势,在总体上与夏季风强度指数的变化趋势相同.除了气候变化以外,流域水土保持和引水对三角洲造陆也有影响.多元回归分析表明,三角洲造陆速率随夏季风强度指数的减弱而减小,随年气温的升高而减小,随梯田林草面积的增加而减小,随年净引水量的增加而减小,同时还表明,夏季风强度指数、年均气温、水土保持措施面积和人类净引水量对三角洲造陆速率变化的贡献率分别为34.94%,3.80%,53.82%和7.44%.表示气候变化的两个变量的贡献率之和为38.7%,说明气候变化对黄河三角洲造陆过程的影响是不容忽视的.