城市测绘院办公自动化系统的设计

介绍了基于NET Framework的城市测绘院办公自动化系统的设计及开发方案。     

四川省九龙县黑牛洞富铜矿矿床黑云母40Ar-39Ar测年及其地质意义

四川省九龙县黑牛洞铜矿床为近期新发现的一个规模在中型以上,产于江浪变质核杂岩中的富铜矿床。本文测试了黑牛洞铜矿床中与成矿密切相关的黑云母的40Ar/39Ar年龄为136.43±0.77 Ma,说明黑牛洞矿床形成于燕山中期。结合矿区附近李伍富铜床矿床地质特征及成矿年龄,表明黑牛洞铜矿床与李伍铜矿床为同一时期形成的矿床,两者成矿与松潘－甘孜造山带大规模岩浆热事件有关,这对于重新认识李伍铜矿床外围找矿潜力和进一步指导找矿工作具有重要意义。     

川西北花岗岩的冷却过程及其对区域成矿的制约

川西北地区位于松潘-甘孜造山带北部,产出众多的中生代花岗岩和卡林型金矿,金成矿作用与区域构造运动和岩浆活动有密切的内在联系。本文拟从花岗岩的角度分析这种内在联系,故测定了川西北的羊拱海黑云母二长花岗岩、达盖寨黑云母二长花岗岩和可尔因二云母二长花岗岩的黑云母或白云母Ar-Ar年龄,分别得到坪年龄158.7±1.4Ma、185.2±1.4Ma、和157.6±1.2Ma,并参考积累的川西北花岗岩体的年代学数据,绘制了造山带北部、中部、东缘中部几个主要花岗岩体的冷却轨迹。不同构造位置花岗岩体的冷却轨迹表明,从造山带北部到造山带东缘中部,各花岗岩体的侵位年龄依次变新,冷却速率依次变缓,在区域构造运动相对较弱期间,各花岗岩的冷却速率明显降低。由以上特征,本文推断在中生代陆内造山过程中,构造应力自松潘-甘孜造山带北部向造山带东缘中部传递,各区域先后由造山相对活跃期进入造山相对宁静期。在造山宁静期,构造运动较弱,花岗岩体缓慢冷却,地壳较长时间保持低温状态,利于金的成矿作用。因而,川西北的金矿主要形成于区域花岗岩的缓慢冷却阶段,这可能是金矿与花岗岩时空耦合的原因之一。     

Combined Sr isotope and trace element analysis of melt inclusions at sub-ng levels using micro-milling, TIMS and ICPMS

This paper describes a technique, which allows precise and accurate Sr isotope measurement combined with trace element analysis of individual melt inclusions, of sample sizes  1 ng of Sr. The technique involves sampling by micro-milling, chemical dissolution, micro Sr column chemistry, TIMS, and ICPMS analyses. A 10% aliquot of each sample solution is used for trace element analysis by double focusing magnetic sector field ICPMS, while Sr is chemically separated from the remaining 90% and used for ⁸⁷Sr/⁸⁶Sr determinations by TIMS.During the development of the technique outlined above, we documented in detail the potential sources of blank contributions and their magnitude. The average size and Sr isotope composition of our laboratory total procedural blank during this study was 5.4 pg ± 0.3 pg Sr (n = 21) with an ⁸⁷Sr/⁸⁶Sr of 0.7111 ± 0.0002 (2SE, n = 3). The total procedural Rb blank was 1.9 ± 0.7 pg (n = 21). The total procedural blank was found to have minimal effect (< 150 ppm shift) on the ⁸⁷Sr/⁸⁶Sr of sample material containing down to  250 pg Sr. Applying a blank correction allows ‘in house’ standards of this size to be corrected back to within 175 ppm of their accepted values. By applying blank corrections we can confidently measure the Sr isotope composition on sample sizes down to  25 pg Sr to an accuracy better than 400 ppm.The utility of the technique is illustrated by application to a suite of melt inclusions from NW Iceland and their host olivines. It is shown that the effect of a small amount of entrainment of the host olivine during sampling of 50 μm melt inclusions has a negligible effect on the measured Sr isotope and trace element composition. Furthermore, where melt inclusions are < 50 μm it is possible to obtain Sr isotope and trace element data on multiple melt inclusions hosted in a single olivine. This provides similar information to that of the single melt inclusions.     

A new procedure for separating and measuring radiogenic isotopes (U, Th, Pa, Ra, Sr, Nd, Hf) in ice cores

A new method for the radiogenic isotope (U–Th–Pa–Ra, Sr, Nd, Hf) analysis of the soluble and insoluble components found within ice cores is presented. Melting experiments with rock standards in the presence of EDTA indicate that carbonates, as well as silicates, can be buffered sufficiently to preclude dissolution. The use of EDTA allows adsorbing species, such as Th and Hf, to remain in solution during melting thus fully separating the dust (insoluble) and sea salt (soluble) components of the ice after filtration. A new elemental separation scheme for low sample masses, less than 5 mg solid material, utilizes 4 primary ion exchange columns and two “clean-up” columns to fully isolate U, Th, Pa, Ra, Sr, Nd, and Hf while maintaining high yields. Elution schemes measured for USGS rock standards and a Chinese loess are presented to provide a comparison for variable matrix compositions. Mass spectrometer techniques were modified to measure small aliquots of the standards, equivalent to the amounts found in ice core samples, 10 ng and less. A MC-ICPMS was employed for the measurement of U, Th, Pa, Ra, and Hf; results of the experiments show that with ion yields up to 1%, rock standards have errors for ²³⁴U/²³⁸U of 1%, ²³⁰Th/²³²Th of 1.5%, [²²⁸Ra] of 9%, and ¹⁷⁶Hf/¹⁷⁷Hf of 100 ppm. MC-TIMS measurements of Sr and Nd show similar errors for small sample sizes: ⁸⁷Sr/⁸⁶Sr of 50 ppm and ¹⁴³Nd/¹⁴⁴Nd of 80 ppm. This new analytical method increases the number of possible tracers measured from a single sample, reducing separation times and sample consumption, as well as providing the addition of a radiometric clock, U-series, to the traditional suite of isotopic tracers, Sr, Nd, and Hf.     

Metamorphic garnet pyroxenite from the 540-600 m main borehole of the Chinese Continental Scientific Drilling (CCSD) project

Compared to other mafic and ultramafic rocks from the CCSD main borehole as well as from the outcrops, rocks from the 540-600 m section is extraordinary in terms of its geophysical as well as geochemical properties. It consists of > 70% hematite-ilmenite garnet pyroxenite (HI-GPX) and < 30% intercalated rutile garnet pyroxenite (R-GPX). Whole-rock geochemical data show that HI-GPXs have: (1) relatively high V with an average of 606 ppm, but lower Nb and Ta; (2) highest TFeO, Fe₂O₃/FeO ratio, and highly variable but strong positive Eu anomalies with Eu/Eu? up to 2.9; (3) anomalously high V/Sc ratios ranging from 8.39 to 43.23, average 15.03; and (4) high amounts of hematite-ilmenite solid solutions with a very fine intergrowth structure down to nanometer scale. V/Sc ratios in the CCSD garnet pyroxenites are correlated negatively with MgO, but positively with Fe₂O₃/FeO ratios. Both suites of pyroxenites have similar rare earth elements and high field strength elements geochemistry. These features demonstrate that these pyroxenites were formed from metamorphism of high-Fe and/or -Ti gabbroic cumulates. This can account not only for low high field strength elements (HFSE) and rare earth elements (REE) but also low Nb/Ta and Zr/Hf ratios in these rocks. Seemingly negative correlation between Nb/Ta and Zr/Hf in the CCSD metabasites, not significantly affected by UHP metamorphism, is also consistent with the silicate differentiation trend in a basaltic magma chamber.     

Geochronological framework and Pb, Sr isotope geochemistry of the Qingchengzi Pb–Zn–Ag–Au orefield, Northeastern China

The Qingchengzi orefield in northeastern China, is a concentration of several Pb–Zn, Ag, and Au ore deposits. A combination of geochronological and Pb, Sr isotopic investigations was conducted. Zircon SHRIMP U–Pb ages of 225.3 ± 1.8 Ma and 184.5 ± 1.6 Ma were obtained for the Xinling and Yaojiagou granites, respectively. By step-dissolution Rb–Sr dating, ages of 221 ± 12 Ma and 138.7 ± 4.1 Ma were obtained for the sphalerite of the Zhenzigou Zn–Pb deposit and pyrargyrite of the Ag ore in the Gaojiabaozi Ag deposit, respectively. Pb isotopic ratios of the Ag ore at Gaojiabaozi (²⁰⁶Pb/²⁰⁴Pb = 18.38 to 18.53) are higher than those of the Pb–Zn ores (²⁰⁶Pb/²⁰⁴Pb = 17.66 to 17.96; Chen et al. [Chen, J.F., Yu, G., Xue, C.J., Qian, H., He, J.F., Xing, Z., Zhang, X., 2005. Pb isotope geochemistry of lead, zinc, gold and silver deposit clustered region, Liaodong rift zone, northeastern China. Science in China Series D 48, 467–476.]). Triassic granites show low Pb isotopic ratios (²⁰⁶Pb/²⁰⁴Pb = 17.12 to 17.41, ²⁰⁷Pb/²⁰⁴Pb = 15.47 to 15.54, ²⁰⁸Pb/²⁰⁴Pb = 37.51 to 37.89) and metamorphic rocks of the Liaohe Group have high ratios (²⁰⁶Pb/²⁰⁴Pb = 18.20 to 24.28 and 18.32 to 20.06, ²⁰⁷Pb/²⁰⁴Pb = 15.69 to 16.44 and 15.66 to 15.98, ²⁰⁸Pb/²⁰⁴Pb = 37.29 to 38.61 and 38.69 to 40.00 for the marble of the Dashiqiao Formation and schist of the Gaixian Formation, respectively).Magmatic activities at Qingchengzi and in adjacent regions took place in three stages, and each contained several magmatic pulses: ca. 220 to 225 Ma and 211 to 216 Ma in the Triassic; 179 to 185 Ma, 163 to 168 Ma, 155 Ma and 149 Ma in the Jurassic, as well as ca. 140 to 130 Ma in the Early Cretaceous. The Triassic magmatism was part of the Triassic magmatic belt along the northern margin of the North China Craton produced in a post-collisional extensional setting, and granites in it formed by crustal melting induced by mantle magma. The Jurassic and Early Cretaceous magmatism was related to the lithospheric delamination in eastern China. The Triassic is the most important metallogenic stage at Qingchengzi. The Pb–Zn deposits, the Pb–Zn–Ag ore at Gaojiabaozi, and the gold deposits were all formed in this stage. They are temporally and spatially associated with the Triassic magmatic activity. Mineralization is very weak in the Jurassic. Ag ore at Gaojiabaozi was formed in the Early Cretaceous, which is suggested by the young Rb–Sr isochron age, field relations, and significantly different Pb isotopic ratios between the Pb–Zn–Ag and Ag ores. Pb isotopic compositions of the Pb–Zn ores suggest binary mixing for the source of the deposits. The magmatic end-member is the Triassic granites and the other metamorphic rocks of the Liaohe Group. Slightly different proportions of the two end-members, or an involvement of materials from hidden Cretaceous granites with slightly different Pb isotopic ratios, is postulated to interpret the difference of Pb isotopic compositions between the Pb–Zn–(Ag) and Ag ores. Sr isotopic ratios support this conclusion. At the western part of the Qingchengzi orefield, hydrothermal fluid driven by the heat provided by the now exposed Triassic granites deposited ore-forming materials in the low and middle horizons of the marbles of the Dashiqiao Formation near the intrusions to form mesothermal Zn–Pb deposits. In the eastern part, hydrothermal fluids associated with deep, hidden Triassic intrusions moved upward along a regional fault over a long distance and then deposited the ore-forming materials to form epithermal Au and Pb–Zn–Ag ores. Young magmatic activities are all represented by dykes across the entire orefield, suggesting that the corresponding main intrusion bodies are situated in the deep part of the crust. Among these, only intrusions with age of ca. 140 Ma might have released sufficient amounts of fluid to be responsible for the formation of the Ag ore at Gaojiabaozi.Our age results support previous conclusions that sphalerite can provide a reliable Rb–Sr age as long as the fluid inclusion phase is effectively separated from the “sulfide” phase. Our work suggests that the separation can be achieved by a step-resolution technique. Moreover, we suggest that pyrargyrite is a promising mineral for Rb–Sr isochron dating.     

Origin of fault domains and fault-domain boundaries (transfer zones and accommodation zones) in extensional provinces: Result of random nucleation and self-organized fault growth

In many extensional provinces, large normal faults dip in the same direction forming fault domains. Features variously named transfer faults, transfer zones, and accommodation zones (hereafter non-genetically referred to as fault-domain boundaries) separate adjacent fault domains. Experimental modeling of distributed extension provides insights on the origin, geometry, and evolution of these fault domains and fault-domain boundaries. In our scaled models, a homogeneous layer of wet clay or dry sand overlies a latex sheet that is stretched orthogonally or obliquely between two rigid sheets. Fault domains and fault-domain boundaries develop in all models in both map view and cross-section. The number, size, and arrangement of fault domains as well as the number and orientation of fault-domain boundaries are variable, even for models with identical boundary conditions. The fault-domain boundaries in our models differ profoundly from those in many published conceptual models of transfer/accommodation zones. In our models, fault-domain boundaries are broad zones of deformation (not discrete strike-slip or oblique-slip faults), their orientations are not systematically related to the extension direction, and they can form spontaneously without any prescribed pre-existing zones of weakness. We propose that fault domains develop because early-formed faults perturb the stress field, causing new nearby faults to dip in the same direction (self-organized growth). As extension continues, faults from adjacent fault domains propagate toward each another. Because opposite-dipping faults interfere with one another in the zone of overlap, the faults stop propagating. In this case, the geometry of the domain boundaries depends on the spatial arrangement of the earliest formed faults, a result of the random distribution of the largest flaws at which the faults nucleate.     

Modifications of resonant column and torsional shear device for the large strain

Conventional RC/TS (resonant column and torsional shear) devices use a specimen with an aspect ratio (height-to-diameter) of 2:1 and this generates a maximum shear strain in the sample of about 1.5% at the maximum rotation of the driving system. The objective of this study is to modify the RC/TS device to generate higher strain amplitude. The modifications include a new base pedestal to overcome the limitations in the travel of the drive system and modification of the coil wiring to increase torque. The effects of the new coil wire on torque in the electromagnetic drive system were evaluated and the application of the modified device was illustrated using sand soil.     

新疆富蕴可可托海—二台断裂带中假玄武玻璃及其围岩的年代学研究

发育在新疆富蕴可可托海—二台断裂带中的假玄武玻璃是古地震断裂快速滑移形成的构造岩。地质产状、显微构造研究表明,这些假玄武玻璃主要由发生重结晶的玻璃质熔融体形成。假玄武玻璃基质的全岩40Ar/39Ar阶段升温方法主阶段和KAr年龄分别为282.8±3.8 Ma和276.4±7.4 Ma。假玄武玻璃所在母岩（黑云母花岗岩和钾长花岗岩）的锆石U-Pb年龄分别为390.4±1.0 Ma和396.3±0.1 Ma,表明二台断裂带中的假玄武玻璃是在二叠世早期形成的,也说明二台断裂带古地震活动至少可以追溯到晚古生代（早二叠世早期）。尽管二台断裂带是现今仍然活动的地震构造带,但目前所见到的假玄武玻璃是早二叠世时期古地震活动的产物。1931年的富蕴80级地震仅仅是沿着二台断裂带发生的多次构造活动的一次活动,与假玄武玻璃之间没有成因上的联系。