饱和多孔介质表面透水性对表面波传播特性影响薄层分析法

饱和半无限体表面透水性会影响表面波（瑞利波和斯通利波）存在及其传播特性。在表面透水情况下,只有瑞利波存在,而在不透水情况,不仅有瑞利波而且还有斯通利波。表面波在工程勘探及声波测试中扮演很重要角色,因此,有必要研究表面透水性对表面波传播特性的影响。采用薄层法,将表面波频率方程根的搜索问题转换成求特征值问题。根据表面波沿深度衰减特性,从一组计算的特征值及特征向量中筛选出与表面波对应特征值、特征向量,由特征值得到表面波频率特性（频散和衰减特性）,由特征向量得到孔隙压力、骨架位移随深度变化,进而分析在表面不透水情况下瑞利波和斯通利波影响深度及程度。     

Hull/mooring/riser coupled dynamic analysis and sensitivity study of a tanker-based FPSO

A computer program is developed for hull/mooring/riser coupled dynamic analysis of a tanker-based turret-moored FPSO (Floating Production Storage and Offloading) in waves, winds, and currents. In this computer program, the floating body is modeled as a rigid body with six degrees of freedom. The first- and second-order wave forces, added mass, and radiation damping at various yaw angles are calculated from the second-order diffraction/radiation panel program WAMIT. The wind and current forces for various yaw angles of FPSO are modeled following the empirical method suggested by OCIMF (Oil Company International Marine Forum).

The mooring/riser dynamics are modeled using a rod theory and finite element method (FEM), with the governing equations described in a generalized coordinate system. The dynamics of hull, mooring lines, and risers are solved simultaneously at each time step in a combined matrix for the specified connection condition. For illustration, semi-taut chain-steel wire-chain mooring lines and steel catenary risers are employed and their effects on global FPSO hull motions are investigated. To better understand the physics related to the motion characteristics of a turret-moored FPSO, the role of various hydrodynamic contributions is analyzed and assessed including the effects of hull and mooring/riser viscous damping, second-order difference-frequency wave-force quadratic transfer functions, and yaw-angle dependent wave forces and hydrodynamic coefficients. To see the effects of hull and mooring/riser coupling and mooring/riser damping more clearly, the case with no drag forces on those slender members is also investigated. The numerical results are compared with MARIN's wave basin experiments.     

数值水槽内的阻尼消波和波浪变形计算

采用时域内对波面运动位置追踪的边界元方法,建立了一种非线性波浪变形计算的三维数值模式,并借助Spongelayer阻尼消波和Sommerfeld放射条件相匹配的处理方式,开发了一条三维非线性波的数值造波水槽,进而对水槽内的Stokes波进行了波浪变形计算。     

Added mass and damping of a sphere section in heave

The Norwegian wave-power buoy¹ consists of a half-immersed floating sphere which is open to the sea at the bottom end. It is a two degree-of-freedom device involving the independent motion of the outer rigid sphere and the pressure across the internal free surface. A simpler model of the device is to represent the oscillatory flow through the bottom opening as another rigid body motion being that of the curved surface which would complete the sphere.The wave-induced forces on this surface and also the outer spherical surface due to independent oscillations of either are determined semi-analytically using a simple extension of the method of Havelock,² recently simplified and generalised by Hulme,³ for the complete half-immersed sphere. In particular the 2 × 2 added mass and damping matrices are determined as a function of frequency and relative size of bottom opening to sphere radius. These quantities are essential in any theoretical analysis of a multi-degree of freedom wave-energy device.     

Maximum entropy principle and statistical distribution of ocean wave heights

Ｍａｘｉｍｕｍｅｎｔｒｏｐｙｐｒｉｎｃｉｐｌｅａｎｄｓｔａｔｉｓｔｉｃａｌｄｉｓｔｒｉｂｕｔｉｏｎｏｆｏｃｅａｎｗａｖｅｈｅｉｇｈｔｓ￥ＷｕＫｅｊｉａｎａｎｄＳｕｎＦｕ（ＲｅｃｅｉｖｅｄＭａｙ１５，１９９５；ａｃｃｅｐｔｅｄＪｕｎｅ２１，１９９５）Ａ...     

Incompressible SPH flow model for wave interactions with porous media

The paper presents an Incompressible Smoothed Particle Hydrodynamics (ISPH) method to simulate wave interactions with a porous medium. The SPH method is a mesh free particle modeling approach that is capable of tracking the large deformation of free surfaces in an easy and accurate manner. The ISPH method employs a strict incompressible hydrodynamic formulation to solve the fluid pressure and the numerical solution is obtained by using a two-step semi-implicit scheme. The ISPH flow model solves the unsteady 2D Navier–Stokes (NS) equations for the flows outside the porous media and the NS type model equations for the flows inside the porous media. The presence of porous media is considered by including additional friction forces into the equations. The developed ISPH model is first validated by the solitary and regular waves damping over a porous bed and the solitary wave interacting with a submerged porous breakwater. The convergence of the method and the sensitivity of relevant model parameters are discussed. Then the model is applied to the breaking wave interacting with a breakwater covered with a layer of porous materials. The computational results demonstrate that the ISPH flow model could provide a promising simulation tool in coastal hydrodynamic applications.     

浮式两级缓冲防撞系统及浮体结构构型研究

以浮式两级缓冲防撞系统为研究对象,介绍其工作原理,利用动力学分析软件LS-DYNA构建了碰撞模型并进行了仿真计算,依据仿真结果完成了以阻尼索组与浮体结构构型为主要内容的防撞系统设计。研究确定了阻尼索组的布置位置、材料及数量,为浮体内部结构构型设计了7种比选方案,分别对5 000 t船舶撞击浮体前梁和侧梁的动态过程进行了仿真分析,对比了不同方案及不同板梁厚度下的接触力。研究结果表明:浮体内部构造若选用板梁厚度12 mm的方案6设计,则碰撞发生时浮体前梁和侧梁分别可以稳定地提供10.4 MN和7.9 MN的均值力,以及11.5 MN和8.9 MN的峰值力,设计浮体能够满足整体刚度要求,防撞系统符合双保护原则。防撞系统及浮体结构构型设计为下一步全面开展船舶撞击防撞系统后的动力学响应分析奠定了基础。     

多稳态夹芯金属压杆的滞后阻尼增强机制与被动减振性能

破碎波浪砰击于导管架等海洋工程结构,产生瞬态强载荷及长时振动。高刚度金属结构可抵抗瞬时强载,但金属固有阻尼极低而难以有效抑制振动,从而加剧结构损伤乃至失效。为使单一结构同时具有高刚度和高阻尼,设计一种多稳态夹芯金属压杆,有限元模拟表明该类压杆稳态随循环载荷依序转换,对应刚度变化使力—位移间产生滞后关系,使高刚度金属压杆具有高效耗散能力;采用夹芯结构弹性理论和发展变边界结构稳定理论,给出了该类压杆的稳态转换阈值和刚度变化过程,与有限元模拟一致;以有限元模拟方法获得了承载和阻尼特性的几何参数相关性;以该类压杆替换导管架斜撑,用有限元方法模拟瞬态强载下结构振动,计算结果表明多稳态夹芯金属压杆保证导管架高刚度同时显著增强了阻尼。     

CFD approach to roll damping of ship with bilge keel with experimental validation

The most common method of reducing roll motion of ship-shaped floating systems is the use of bilge keel which act as damping elements. The estimation of the damping introduced by bilge keel is still largely based on empirical methods. The present work adopts the CFD approach to the estimation of roll damping, both without and with bilge keel and validates the results with experiments conducted in a wave flume. Specifically, free oscillation tests are conducted at model scale to obtain roll damping, both by experiments and CFD simulation and reasonably good comparisons are obtained. The experiments also include PIV study of the flow field and attempt has been made to correlate the measured flow field with that obtained by CFD. The CFD methodology has the potential to determine rationally the size and orientation of bilge keels in design with reasonably accurate estimate of the additional roll damping that it provides to ship's roll motion.     

Numerical simulation of dynamic response around shield tunnel in the soft soil area

When a subway train moves through a tunnel, vibrations are generated and transmitted to soils around the tunnel and adjacent structures. Subway train operation has an impact on the shield tunnel lining and the soils around tunnel, especially soft soils that are mostly marine sediments having poor engineering properties. An elastoplastic dynamic finite difference model was built by considering the hysteretic behavior of these marine soft soils and the interaction between the soils and the tunnel to study their dynamic response. Elastic and plastic constitutive models were adopted for tunnel lining and soft soils, respectively. Hysteretic damping was obtained with the Hardin–Drnevich model to reflect the hysteretic behavior of soil under the dynamic load. There are two peaks of the cumulative vertical displacement within 2?s of train moving and it reaches a dynamic balance after 2?s. The soil layers below the shield tunnel are under the compression and the soil layers above the tunnel are in the extrusion state, and turn to uplift. Maximum bending moment and shear forces of lining vary and appear at different places. A parametric study indicates that the speed of train and the interface have an impact on the dynamic behavior of soft soils.