基于Hyperion高光谱数据和随机森林方法的岩性分类与分析

探索利用高光谱数据的岩性填图新方法是遥感地质应用领域的重要需求之一。本文运用随机森林方法和EO-1Hyperion高光谱数据,对新疆塔里木西北部柯坪地区的局部区域进行岩性分类,并对相关问题进行分析。分别利用光谱特征以及加入光谱一阶导数特征进行岩性分类,并对不同特征对岩性分类的重要性进行分析,同时与现有的基于光谱角制图方法(SAM)进行比较。结果表明,与SAM方法相比,随机森林方法得到了更高精度的岩性分类结果,是一种有效可行的岩性分类方法。根据特征重要性的排序,蓝绿光波段、短波红外波段以及相应的一阶导数特征对研究区Hyperion数据的沉积岩岩性分类贡献更大。     

随机森林模型预测岩溶区酸性煤矿井水锰污染

酸性煤矿井水严重威胁地下水的水质。如何更有效对受影响区域的地下水源进行动态监测是当前的一个关键问题。采用随机森林中的回归模型,利用自变量(采空区水位、岩溶水位、pH值、泉水流量、电导率)和因变量(污染离子浓度)的相关性,建立回归模型;使用测试数据进行误差分析,结果证明模型准度较高,所得预测值具有参考价值;得出各自变量对因变量影响的重要程度,分析结果与实际情况相符合。试验表明,随机森林回归模型在酸性煤矿井水污染预测方面具有适用性,可作为辅助手段监测水质污染情况,对今后工作有一定的指导意义和经济价值。     

分形方法在苏北盆地金湖凹陷石油资源评价中的应用

成熟勘探区剩余资源量的多少倍受关注。根据金湖凹陷的油藏规模分布特征,应用分形方法估计该区的石油地质资源。石油地质资源总量为12284×10⁴t,分布在507个油藏中;其中未发现的具有经济价值的石油地质资源量为2740×10⁴t,分布在126个油藏中。这反映了该区的油气勘探程度较高,但仍有一定的勘探潜力,大量中-小油藏是今后勘探的主攻目标。分形方法作为油气资源评价的一种新途径,计算过程简便,结果可靠,应用前景广阔。     

雪崩、分形与雷暴放电中强闪的自组织演化

强调了雪崩、分形与远离平衡系统自组织演化的联系。利用2003年夏季青藏高原中部地区雷暴放电的地面电场野外观测资料,基于近年来发展的分形及多重分形分析中的去势涨落分析(detrend-ed fluctuation analysis,DFA)方法,对强闪前电场信号的关联及多重分形特征进行了分析,发现强放电前过程具有明显的分形和多重分形特征,多重分形谱与推广的二项倍增串级模式符合。分析在一定程度上表明了雷暴强放电发生的可能的自组织演化性。     

Estimating fractional cover of crop,crop residue,and soil in cropland using broadband remote sensing data and machine learning

The fractional vegetation cover (FVC), crop residue cover (CRC), and bare soil (BS) are three important parameters in vegetation–soil ecosystems, and their correct and timely estimation can improve crop monitoring and environmental monitoring. The triangular space method uses one CRC index and one vegetation index to create a triangular space in which the three vertices represent pure vegetation, crop residue, and bare soil. Subsequently, the CRC, FVC, and BS of mixed remote sensing pixels can be distinguished by their spatial locations in the triangular space. However, soil moisture and crop-residue moisture (SM-CRM) significantly reduce the performance of broadband remote sensing CRC indices and can thus decrease the accuracy of the remote estimation and mapping of CRC, FVC, and BS. This study evaluated the use of broadband remote sensing, the triangular space method, and the random forest (RF) technique to estimate and map the FVC, CRC, and BS of cropland in which SM-CRM changes dramatically. A spectral dataset was obtained using: (1) from a field-based experiment with a field spectrometer; and (2) from a laboratory-based simulation that included four distinct soil types, three types of crop residue (winter-wheat, maize, and rice), one crop (winter wheat), and varying SM-CRM. We trained an RF model [designated the broadband crop-residue index from random forest (CRRF)] that can magnify spectral features of crop residue and soil by using the broadband remote sensing angle indices as input, and uses a moisture-resistant hyperspectral index as the target. The effects of moisture on crop residue and soil were minimized by using the broadband CRRF. Then, the CRRF-NDVI triangular space method was used to estimate and map CRC, FVC, and BS. Our method was validated by using both laboratory- and field-based experiments and Sentinel-2 broadband remote-sensing images. Our results indicate that the CRRF-NDVI triangular space method can reduce the effect of moisture on the broadband remote-sensing of CRC, and may also help to obtain laboratory and field CRC, FVC, and BS. Thus, the proposed method has great potential for application to croplands in which the SM-CRM content changes dramatically.     

Update and spatial extension of strategic forest inventories using time series remote sensing and modeling

Up-to-date forest inventory information relating the characteristics of managed and natural forests is fundamental to sustainable forest management and required to inform conservation of biodiversity and assess climate change impacts and mitigation opportunities. Strategic forest inventories are difficult to compile over large areas and are often quickly outdated or spatially incomplete as a function of their long production cycle. As a consequence, automated approaches supported by remotely sensed data are increasingly sought to provide exhaustive spatial coverage for a set of core attributes in a timely fashion. The objective of this study was to demonstrate the integration of current remotely-sensed data products and pre-existing jurisdictional inventory data to map four forest attributes of interest (stand age, dominant species, site index, and stem density) for a 55 Mha study region in British Columbia, Canada. First, via image segmentation, spectrally homogenous objects were derived from Landsat surface-reflectance pixel composites. Second, a suite of Landsat-based predictors (e.g., spectral indices, disturbance history, and forest structure) and ancillary variables (e.g., geographic, topographic, and climatic) were derived for these units and used to develop predictive models of target attributes. For the often difficult classification of dominant species, two modelling approaches were compared: (a) a global Random Forests model calibrated with training samples collected over the entire study area, and (b) an ensemble of local models, each calibrated with spatially constrained local samples. Accuracy assessment based upon independent validation samples revealed that the ensemble of local models was more accurate and efficient for species classification, achieving an overall accuracy of 72% for the species which dominate 80% of the forested areas in the province. Results indicated that site index had the highest agreement between predicted and reference (R² = 0.74, %RMSE = 23.1%), followed by stand age (R² = 0.62, %RMSE = 35.6%), and stem density (R² = 0.33, %RMSE = 65.2%). Inventory attributes mapped at the image-derived unit level captured much finer details than traditional polygon-based inventory, yet can be readily reassembled into these larger units for strategic forest planning purposes. Based upon this work, we conclude that in a multi-source forest monitoring program, spatially localized and detailed characterizations enabled by time series of Landsat observations in conjunction with ancillary data can be used to support strategic inventory activities over large areas.     

Mapping wetland characteristics using temporally dense Sentinel-1 and Sentinel-2 data: A case study in the St. Lucia wetlands,South Africa

Wetlands have been determined as one of the most valuable ecosystems on Earth and are currently being lost at alarming rates. Large-scale monitoring of wetlands is of high importance, but also challenging. The Sentinel-1 and -2 satellite missions for the first time provide radar and optical data at high spatial and temporal detail, and with this a unique opportunity for more accurate wetland mapping from space arises. Recent studies already used Sentinel-1 and -2 data to map specific wetland types or characteristics, but for comprehensive wetland characterisations the potential of the data has not been researched yet. The aim of our research was to study the use of the high-resolution and temporally dense Sentinel-1 and -2 data for wetland mapping in multiple levels of characterisation. The use of the data was assessed by applying Random Forests for multiple classification levels including general wetland delineation, wetland vegetation types and surface water dynamics. The results for the St. Lucia wetlands in South Africa showed that combining Sentinel-1 and -2 led to significantly higher classification accuracies than for using the systems separately. Accuracies were relatively poor for classifications in high-vegetated wetlands, as subcanopy flooding could not be detected with Sentinel-1’s C-band sensors operating in VV/VH mode. When excluding high-vegetated areas, overall accuracies were reached of 88.5% for general wetland delineation, 90.7% for mapping wetland vegetation types and 87.1% for mapping surface water dynamics. Sentinel-2 was particularly of value for general wetland delineation, while Sentinel-1 showed more value for mapping wetland vegetation types. Overlaid maps of all classification levels obtained overall accuracies of 69.1% and 76.4% for classifying ten and seven wetland classes respectively.     

Estimating aboveground biomass of the mangrove forests on northeast Hainan Island in China using an upscaling method from field plots,UAV-LiDAR data and Sentinel-2 imagery

The mangrove forests of northeast Hainan Island are the most species diverse forests in China and consist of the Dongzhai National Nature Reserve and the Qinglan Provincial Nature Reserve. The former reserve is the first Chinese national nature reserve for mangroves and the latter has the most abundant mangrove species in China. However, to date the aboveground ground biomass (AGB) of this mangrove region has not been quantified due to the high species diversity and the difficulty of extensive field sampling in mangrove habitat. Although three-dimensional point clouds can capture the forest vertical structure, their application to large areas is hindered by the logistics, costs and data volumes involved. To fill the gap and address this issue, this study proposed a novel upscaling method for mangrove AGB estimation using field plots, UAV-LiDAR strip data and Sentinel-2 imagery (named G∼LiDAR∼S2 model) based on a point-line-polygon framework. In this model, the partial-coverage UAV-LiDAR data were used as a linear bridge to link ground measurements to the wall-to-wall coverage Sentinel-2 data. The results showed that northeast Hainan Island has a total mangrove AGB of 312,806.29 Mg with a mean AGB of 119.26 Mg ha⁻¹. The results also indicated that at the regional scale, the proposed UAV-LiDAR linear bridge method (i.e., G∼LiDAR∼S2 model) performed better than the traditional approach, which directly relates field plots to Sentinel-2 data (named the G∼S2 model) (R² = 0.62 > 0.52, RMSE = 50.36 Mg ha⁻¹<56.63 Mg ha⁻¹). Through a trend extrapolation method, this study inferred that the G∼LiDAR∼S2 model could decrease the number of field samples required by approximately 37% in comparison with those required by the G∼S2 model in the study area. Regarding the UAV-LiDAR sampling intensity, compared with the original number of LiDAR plots, 20% of original linear bridges could produce an acceptable accuracy (R² = 0.62, RMSE = 51.03 Mg ha⁻¹). Consequently, this study presents the first investigation of AGB for the mangrove forests on northeast Hainan Island in China and verifies the feasibility of using this mangrove AGB upscaling method for diverse mangrove forests.     

In-season crop classification using elements of the Kennaugh matrix derived from polarimetric RADARSAT-2 SAR data

Accurate spatio-temporal classification of crops is of prime importance for in-season crop monitoring. Synthetic Aperture Radar (SAR) data provides diverse physical information about crop morphology. In the present work, we propose a day-wise and a time-series approach for crop classification using full-polarimetric SAR data. In this context, the 4 × 4 real Kennaugh matrix representation of a full-polarimetric SAR data is utilized, which can provide valuable information about various morphological and dielectric attributes of a scatterer. The elements of the Kennaugh matrix are used as the parameters for the classification of crop types using the random forest and the extreme gradient boosting classifiers.The time-series approach uses data patterns throughout the whole growth period, while the day-wise approach analyzes the PolSAR data from each acquisition into a single data stack for training and validation. The main advantage of this approach is the possibility of generating an intermediate crop map, whenever a SAR acquisition is available for any particular day. Besides, the day-wise approach has the least climatic influence as compared to the time series approach. However, as time-series data retains the crop growth signature in the entire growth cycle, the classification accuracy is usually higher than the day-wise data.Within the Joint Experiment for Crop Assessment and Monitoring (JECAM) initiative, in situ measurements collected over the Canadian and Indian test sites and C-band full-polarimetric RADARSAT-2 data are used for the training and validation of the classifiers. Besides, the sensitivity of the Kennaugh matrix elements to crop morphology is apparent in this study. The overall classification accuracies of 87.75% and 80.41% are achieved for the time-series data over the Indian and Canadian test sites, respectively. However, for the day-wise data, a ∼6% decrease in the overall accuracy is observed for both the classifiers.     

Changes in air pollutants during the COVID-19 lockdown in Beijing:Insights from a machine-learning technique and implications for future control policy

基于2015-2020年北京35个环境空气站和20个气象站观测资料,应用机器学习方法(随机森林算法)分离了气象条件和源排放对大气污染物浓度的影响.结果发现,为应对疫情采取的隔离措施使北京2020年春节期间大气污染物浓度降低了35.1％-51.8％;其中,背景站氮氧化物和一氧化碳浓度的降幅最大,超过了以往报道较多的交通站...