地形坡度对多金属结核分布的控制作用

选取我国东太平洋多金属结核开辟区内的一个区域作为研究区,利用人工神经网络中应用最为广泛的BP网络,建立控制多金属结核分布的地质因素与多金属结核分布之间的映射关系,探讨地形坡度对多金属结核分布的控制作用.结果表明,在经度、纬度、水深、坡度四个因素中,坡度对结核分布影响程度最大;多金属结核主要分布于坡度小于5°的地方;当坡度小于5°时,丰度与地形坡度呈正相关,品位与地形坡度呈负相关,丰度与品位呈负相关;品位与坡度似呈指数关系,坡度增大,品位降低.     

Semi-Probabilistic Evaluation of System Redundancy for Existing Offshore Structures

In this paper, a new definition of structure system redundancy is proposed in view of the various measures for structure redundancy. By introducing the terms of structure system failure at the mechanism level and equivalent reliability index, the safety for existing offshore platforms can be evaluated by the semi-probabilistic method presented in this paper. Some numerical examples are given and satisfactory results have been obtained.     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

黄海表面水温场的准周期变化分析

本文用能谱方法分析了黄海的海表面水温(SST)场的准周期变化。由分析结果清楚地看出,SST具有高频准周期变化:黄海北部以2.6—3.2,1.4—1.7,3.6—3.8和6.7个月的准周期为主;3.3—3.6,5,1.3—2.3及6.7个月在黄海南部占优势。同时,两个海域都有6.7和3.3年的明显的准周期变化。     

Microbial Diversity in Nankai Trough Sediments at a Depth of 3,843 m

Dense populations of bivalves, primarily Calyptogena sp., were observed at cold seeps of the Nankai Trough. Bacterial input to the sediment was estimated through determination of phospholipid ester-linked fatty acid (PLFA) and DNA profiles. Results indicated a bacterial biomass of 10⁹ cells (g dry wt)^-1 while individual fatty acid profiles revealed a predominance of monounsaturated fatty acids, mainly 18:1 isomers. The presence of these fatty acids can be interpreted to reflect a response to low temperature and a predominance of psychrophilic bacteria. DNA fragments encoding bacterial ribosomal RNA small-subunit sequences (16S rDNA) were amplified by the polymerase chain reaction method using DNA extracted directly from the sediment samples. From the sequencing results, at least 19 kinds of bacterial 16S rDNAs related to mostly the Proteobacteria and a few gram-positive bacteria were identified. These results suggest that the bacterial community in the Nankai Trough sediments consists of mainly bacteria belonging to the Proteobacteria , , and subdivisions. Bacteria belonging to the and subdivisions, which are known to include epibiont and sulfate reducing bacteria, respectively, were mostly detected in the sediment obtained from inside the area of the Calyptogena community, and the -Proteobacteria may function to supply reduced sulfur to bacterial endosymbionts of Calyptogena.     

分潮波模型多资料数值计算方法研究 Ⅱ.有限差分最小二乘方法

对含多资料的分潮波模型的超定问题进行探讨，建立一种有限差分—最小二乘方法，该方法使得岸边资料直接进入了计算方程，并保证岸界法向流速为零条件。通过对渤海的四大分潮的试算，证实本方法可行。     

牙鲆种群动态及其资源管理

本文根据1980—1986年间鱼类生物学参数测定,结合体长分布资料的模拟分析,研究黄、渤海区牙鲆种群年龄结构、死亡动态以及在不同年龄和死亡率条件下世代资源生物量变化的规律。模型分析结果表明,当F=1.0和t_c=6.0a时,单位补充量最大群体产量为1492g。由此认为,现阶段牙鲆资源利用的最佳策略是通过增殖放流,增加资源补充;同时应适当控制捕捞压力,减少渔具对幼鱼资源的破坏并增设繁殖保护区,以追求最大持续产量。     

Analysis of Mixing of Pollutants in Water Waves and Currents

A vertical two-dimensional turbulence numerical model for the interaction of waves and currents is developed in the paper based on the nonlinear two-equation k-ε model with the VOF method.The one-dimensional equivalent advection velocity and equivalent mixing coefficient are defined and the solving process is introduced:The pollutant concentration field,generated by an instant source in waves and currents,is calculated with the model,and then the equivalent advection velocity and equivalent mixing coefficient are obtained by calculating the time derivative of the mean and variance of pollutant concentration probability distribution.The effects of wave period and wave height on the equivalent mixing coefficient for waves and wave-currents are also investigated.     

Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.