浙江黄岩望海岗石英正长岩的锆石U-Pb年代学与Sr-Nd-Hf同位素地球化学及其对岩石成因的制约

望海岗岩体是浙江沿海晚中生代一个典型的破火口中央岩株侵入体,其主体岩性为石英正长岩。锆石LA-ICP-MS定年测得两件代表性样品的U-Pb年龄分别为98.3±1.2Ma和98.5±1.3Ma,表明该岩体属晚白垩世初期岩浆活动的产物。岩体的组成矿物主要为碱性长石(35%~60%)、斜长石(15~20%, An=13~20)、石英(15%~18%)、角闪石(3%~5%)和少量黑云母(<1%),副矿物有榍石、锆石、磷灰石等。岩石普遍发育花斑结构,岩体中可见深色闪长质包体。地球化学特征上,该岩体具有准铝、亚碱性和富钾特点,并富Rb、Th、Ba、Zr、Hf,贫Sr、P、Ti、Nb、Ta,岩石的稀土总量较高,富轻稀土,具中-弱的铕负异常(δEu=0.64~0.76)。其Sr、Nd同位素组成较均一 ,但锆石Hf同位素组成变化范围大 。温压计算结果表明该岩体具有高温(826~846℃)浅成特点,定位深度约在2~3km。岩石学及元素与Sr-Nd-Hf同位素组成特征综合指示该岩体是在弧后伸展引张背景下,由底侵的幔源岩浆与其诱发熔融的深部壳源岩浆经混合后,并经一定程度的分异演化,最后在浅成环境定位的产物。     

Characters of fluid inclusions in quartz veins in pyroclastic rock of Budate Group, Hailar Basin

It was adopted that the fluorescence microscope, Gas-Flow Heating/Freezing System, Laser-Raman Spectroscopy, etc. are the multimedia techniques for analysing fluid inclusions of quartz veins in Budate Group, Hailar Basin. The results show that fluid inclusions in quartz veins are small ( 1～5μm) monophase, two-phase (liquid vapour) aqueous inclusions; the two-phase aqueous inclusions homogcniese to the liquid phase between 120 ～ 180℃, two dominant types for oil inclusions were determined in quartz veins: ① the primary inclusions, almostly gas, measurement by Laser-Raman Spectroscopy show that both gas phase are enriched in CH4 (94.50%～99.25% ) and C6H6 (0.75%～2.70%), under these conditions, inclusions may have come from juvenile fliud followingly the quartz veins formation. While the quartz veins exhibiting different striking luminescence has been proved by cathodoluminescence, it would be impossible to come from the deep magmas and strata. ② aqueous, liquid and two-phase (liquid vapour) oil inclusions, belong to secondary hydrocarbon inclusions. The oil inclusions of this stage represent mainly the large scale of oil accumulation, located within the quartz microfracture.     

Fluid-assisted fracturing,cataclasis, and resulting plastic flow in mylonites from the Moresby Seamount detachment,Woodlark Basin

The Moresby Seamount detachment (MSD) in the Woodlark Basin (offshore Papua New Guinea) is a large active low-angle detachment excellently exposed at the seafloor, and cutting through mafic metamorphic rocks. Hydrothermal infiltration of quartz followed by that of calcite occurred during cataclastic deformation. Subsequent deformation of these a priori softer minerals leads to mylonite formation in the MSD. This study aims at a better understanding of the deformation mechanism switch from cataclastic to plastic flow. Deformation fabrics of the fault rocks were analyzed by light-optical microscopy. Rheologically critical phases were mapped to determine distributions and area proportions, and EBSD was used to measure crystallographic preferred orientation (CPO). Strong calcite CPOs indicate dominant dislocation creep. Quartz CPOs, however, are weak and more difficult to interpret, suggesting at least some strain accommodation by diffusion creep mechanisms. When quartz aggregates are intermixed with the polymineralic mylonite matrix diffusion creep grain boundary sliding may be dominant. The syntectonic conversion from mafic cataclasites to more siliceous and carbonaceous mylonites induced by hydrothermal processes is a critical weakening mechanism enabling the MSD to at least intermittently plastic flow at low shear stresses. This is probably a crucial process for the operation of low-angle detachments in hydrated and dominantly mafic crust.     

http://www.sciencedirect.com/science/article/pii/S1674987112001478

REE composition of the carbonates of the auriferous quartz carbonate veins (QCVs) of the Neoarchean Ajjanahalli gold deposit, Chitradurga schist belt, Dharwar Craton, is characterized by U-shaped chondrite normalized REE patterns with both LREE and HREE enrichment and a distinct positive Eu anomaly. As positive Eu anomaly is associated with low oxygen fugacity, we propose that the auriferous fluids responsible for gold mineralization at Ajjanahalli could be from an oxygen depleted fluid. The observed positive Eu anomaly is interpreted to suggest the derivation of the auriferous fluids from a mantle reservoir. The location of Ajjanahalli gold deposit in a crustal scale shear zone is consistent with this interpretation.     

Optical dating of sediments in Wadi Sabra (SW Jordan)

At Wadi Sabra (SW Jordan) human occupation dates back to the Palaeolithic and Epipalaeolithic. Although there is stratigraphic correlation based on archaeological finds of Ahmarian origin, numerical age estimates are lacking. We applied single-aliquot optical dating of coarse grained quartz of wadi deposits and investigated the luminescence properties in detail to achieve more accurate age information about the time of human occupation. Weak luminescence signals and scattered dose distributions characterise the multi-grain aliquots. The residual doses of the investigated modern wadi sediment are between 0 and 7 Gy. Moreover, comparison of equivalent dose (De) values of 1 mm and 8 mm aliquots shows higher equivalent doses for the large aliquots. Both experiments indicate that the luminescence signal is partially bleached prior to deposition. The dose distributions of all samples are broadly scattered and have overdispersion values between 25 and 43%, some samples are significantly skewed. The shape of the dose distributions points to other sources of scatter, in addition to partial bleaching. Comparison of 1 mm multi-grain and single-grain data demonstrates that the luminescence signal of one multi-grain aliquot most likely is from a single grain. For this reason, variation in the number of photon counts due to the weak luminescence intensity and variations in beta microdosimetry have a bigger impact on the spread of dose distributions. However, we cannot quantify the particular impact of partial bleaching, weak luminescence intensity and beta microdosimetry. To account for the spread of the dose distribution, we use the central age model to calculate equivalent doses. Age calculations yield results in the range of 30–48 ka.     

Age comparison by luminescence using quartz and feldspar on core HPQK01 from the Pearl River delta in China

Reliable chronology is critical for reconstructing estuarine delta process. In this study, detailed chronological framework has been performed on a core HPQK01 (52 m in depth) from the central Pearl River delta (PRD) of China. Both quartz OSL and feldspar post-IR IRSL (pIRIR) methods for late Pleistocene sediments, as well as radiocarbon dating for Holocene sediments, were applied to date the core. Results show that quartz OSL ages range from 125 ± 18 ka to 58 ± 6 ka, and that all of them were minimum ages due to the OSL signal saturation. Feldspar pIR₂₀₀IR₂₉₀ protocol shows some overestimation in dose recovery test, with the recovered to the given ratio of 1.2, while a ratio of around 1 was obtained for feldspar pIR₅₀IR₂₅₀ signals. Robust ages have been obtained from feldspar fading corrected pIR₅₀IR₂₅₀ dating with ages ranging from 150 ± 17 ka to 98 ± 12 ka. AMS ¹⁴C results suggest that subtidal-intertidal zone was deposited during the middle Holocene from 8.21 ± 0.19 cal ka BP to 4.99 ± 0.25 cal ka BP. The sedimentology of core HPQK01 record two marine transgressive-regressive cycles. Based on the dating results, the lower fluvial sediment unit (T2) could be correlated to marine isotope stage (MIS) 6, and the lower marine unit (M2) was deposited during MIS 5. A sedimentary hiatus occurred with age range of from MIS 4 to MIS 2. Since middle Holocene, another marine stratum (M1) has been accumulated. Overall, our findings suggest that feldspar pIRIR dating method has the potential to establish the Quaternary chronostratigraphic framework of the PRD for samples with ages within 150 ka.     

Testing single-grain quartz OSL methods using sediment samples with independent age control from the Bordes-Fitte rockshelter (Roches d'Abilly site,Central France)

We present quartz single-grain dose distributions for four well-bleached and unmixed sediment samples with independent age control (22–48 ka), from the archaeologically important Bordes-Fitte rockshelter at Roches d'Abilly, France. This site has previously been dated using ¹⁴C AMS dating and standard multi-grain OSL dating using both quartz and feldspar. The effect of rejection criteria usually employed in single-grain dating on dose and over-dispersion is tested using both laboratory irradiated samples and natural samples. It is shown that had these samples been analysed in the absence of other age control, standard modelling decisions based on the shape of single-grain dose distributions would have led to significant misinterpretation of results and a corresponding >40% underestimation in age. If we instead ignore this standard decision process and apply weighted average and mixing models then the most likely results deviate from the expected ages by >10%. Finally, we show that by careful consideration of the luminescence characteristics of individual grains, we are able to obtain good agreement with the independent age control by applying alternative rejection criteria but this is at the cost of reducing the accepted grain population by more than an order of magnitude, with the corresponding inevitable decrease in precision.     

Parallel calibration transfer and systematic effects in retrospective absorbed dose estimation using OSL

Parallel multiple aliquot calibration transfer is combined with the use of standardized optically stimulated luminescence signals and evaluation of single aliquot regenerative dose response characteristics, to produce a robust and efficient transfer protocol for mineral samples used in dating and retrospective dosimetry. Transfer was made from an IST-LPSR ⁶⁰Co primary air kerma standard to four Risø and Daybreak ⁹⁰Sr/⁹⁰Y irradiators, for quartz or polymineral grains of 90/100–160 μm or 160–250 μm diameter from seven samples. Grains were pretreated by activation, heating, or bleaching, and mounted on 0.5 mm thick aluminium or stainless steel disks, or 0.25 mm thick stainless steel cups. Multiple aliquot conversion coefficients based on parallel irradiations (mGy_60Co per s of ⁹⁰Sr/⁹⁰Y exposure) were corrected for non linearity in dose response using the regenerative measurements, and compared with “single aliquot” coefficients obtained directly from the regenerative, i.e. retrospectively measured, dose responses. Ratios of measured/given β exposure time provide controls: these were close to unity for activated and heated material, which exhibited predose sensitization, and vice versa for optically bleached samples. Parallel multiple aliquot calibration transfer, using OSL integrated over the main signal decay, was found to offer better accuracy and precision than retrospective single aliquot measurements, and was robust for polyminerals as well as quartz. Differences in conversion coefficient between grain-sizes and supports on a given irradiator ranged up to 25% and were specific to the irradiator-support-grainsize permutation. Geometric effects are quantitatively explained by the solid angle subtended at the source by the sample, and the effect of support material (and thickness) by differences in electron backscatter.     

Overpressure preventing quartz cementation? - A reply

Chemical compaction and the relative importance of the pressure dissolution and illite-mica induced dissolution (IMID) models have remained a contentious issue, as is the role played by stress in chemical compaction. This paper offers further support and evidence as discussed in Stricker et al. (2016b), focusing on the reservoir quality of the Triassic Skagerrak Formation sandstones in the high pressure high temperature (HPHT) Central Graben, North Sea. The reply discusses alterative reservoir quality interpretations and comments as raised by Maast (2016). A series of theoretical and experimental studies, as well as field based evidence is presented providing strong support to the important role of stress (e.g. vertical effective stress) during chemical compaction. The evidence leads to the conclusion that the process of chemical compaction is stress and temperature driven and significantly enhanced by clay minerals, playing a catalytic role by increasing the width of diffusion pathway or by modifying the kinetics of the dissolution process.     

Refining late Quaternary plunge pool chronologies in Australia's monsoonal 'Top End'

Plunge pool deposits from Australia's 'Top End' are considered as important archives of past monsoonal activity in the region. The available chronology of these deposits was so far based on thermoluminescence (TL) dating and indicated maximum flood magnitudes during the Last Glacial Maximum in contrast with more arid conditions as deduced from other archives of the region. This study revisits plunge pool deposits at Wangi Falls by applying multiple and single-grain Optically Stimulated Luminescence (OSL) dating of quartz and high-resolution gamma spectrometry, supported by radiocarbon dating of organic material. The aim is to reappraise the existing chronology and investigate if the deposits are affected by partial bleaching, post-depositional mixing and/or problems related to annual dose determination. The latter seems to have a minor impact on the ages at most. Equivalent Dose (D_e) distributions are broad, in particular for single grains, but apparently not result from partial bleaching or post-depositional mixing. Rather, microdosimetry caused by radiation hotspots in the sediment and zircon inclusions in the quartz grains is considered problematic for these sediments. The results presented here imply that the previous TL chronology overestimated the real deposition age of the sediments.