松辽盆地南部月亮泡地区萨尔图油层Ⅰ砂组沉积微相研究及有利区带预测

应用录井、测井、地质和地震资料,研究了松辽盆地南部月亮泡地区上白垩统姚家组萨尔图油层Ⅰ砂组的沉积微相,并采用沿层地震属性分析技术,分析了河道砂体的展布特征,利用拟合分析进行验证,结果表明萨尔图油层Ⅰ砂组沉积相为三角洲前缘亚相,其微相类型有水下分流河道、河口坝和分流间湾,已有的勘探成果也证实水下分流河道砂体是油气的有利聚集区,结合构造发育情况,预测了松辽盆地南部月亮泡地区构造岩性油气藏勘探的有利区带     

鄂尔多斯盆地镇北地区长3储层微观非均质性的实验分析

油气储层的微观非均质性特征是储层地质学研究的重要内容之一。本文的目的是研究鄂尔多斯盆地镇北地区长3储层微观非均质性特征,研究方法是利用真实砂岩微观模型实验。通过实验发现鄂尔多斯盆地镇北地区长3和储层为致密型砂岩,真实砂岩微观模型实验直观地显示出鄂尔多斯盆地镇北地区长3储层具有很强的微观非均质性,砂岩的成岩作用和孔隙结构是影响本区长3储层微观非均质性的主要原因。在低渗透砂岩中,溶蚀作用引起砂岩产生强烈的非均质性,而这些砂岩则形成长3储层的高渗带。     

地洼盆地砂岩铜矿床的构造-流体-成矿体系及演化

我国南方地洼盆地构造演化、流体演化和砂岩铜矿成矿作用三者之间具有密切的关系,处于一个统一的系统之中。盆地早中期的裂陷、坳陷作用及热构造活动导致了富铜矿源层的形成、大气降水的深循环和水／岩相互作用、并形成中高温、压、高盐度的热卤水含铜流体。在构造－流体－砂岩铜矿成矿体系的演化中,构造演化制约了含铜流体的演化和砂岩铜矿的成矿作用,而主要发生于盆地演化的晚期。     

马庄山金矿床中石英特征与金矿化的关系

马庄山金矿床中自然金,除与多金属硫化物密切共生与伴生外,主要脉石矿物就是石英。历次的构造运动,多期的矿液活动及演化,无不在石英的宏观构造和微观构造上有直接或间接的反应。系统详细地研究这些构造,可以指示金矿的找矿方向及扩大金矿储量     

含流体致密砂岩的纵波频散及衰减:基于双重双重孔隙结构模型描述的特征分析

致密砂岩普遍具有低孔、低渗及微裂缝发育的地质特征,并且呈现出很强的非均匀性.致密砂岩储层与常规砂岩储层比较,具有明显的岩石物理性质、渗流力学性质方面的差异.致密砂岩内部的非均匀性对弹性波频散、衰减有显著影响,其中包括孔隙结构的非均匀性,即岩石内部孔隙参数的不均一性,以及孔隙内部不相混溶流体的非均匀分布;此外,非均匀性的尺度也决定了波出现显著频散与衰减的频段.综合考虑致密砂岩孔隙结构非均匀性及流体斑块状饱和的非均匀性,本文采用双双重孔隙介质结构模拟了致密砂岩的弹性波响应,分析了同时具备两类非均质性岩石中的波传播特征.调查分析了两组分别来自中国鄂尔多斯盆地苏里格气田及四川盆地广安气田的不同类型致密砂岩储层的岩芯超声波实验数据,给出了岩石样本的弹性波速度频散与衰减曲线.结果显示理论模型预测结果与完全饱和、部分饱和岩石的实验数据吻合良好.对两个地区致密砂岩岩芯数据进行对比分析,苏里格致密砂岩样本总体上比广安致密砂岩渗透率高,在各孔隙度范围内,特征模拟显示苏里格样本的裂隙尺寸明显大于广安样本.广安致密砂岩在低孔隙度范围内发育了更多、更小的颗粒裂隙/接触.致密砂岩的速度频散与衰减结果受流体黏度、晶体破裂及流体斑块状饱和的共同影响.此外,孔隙度越大,部分饱和岩石中斑块状饱和机制对总衰减的贡献越低,与之相对,结构非均质性所占的比重则有所增强.     

Characterisation and multifaceted anisotropy assessment of Corvio sandstone for geological CO2 storage studies

We present a comprehensive characterisation of the physical, mineralogical, geomechanical, geophysical, and hydrodynamic properties of Corvio sandstone. This information, together with a detailed assessment of anisotropy, is needed to establish Corvio sandstone as a useful laboratory rock‐testing standard for well‐constrained studies of thermo–hydro–mechanical–chemical coupled phenomena associated with CO₂ storage practices and for geological reservoir studies in general. More than 200 core plugs of Corvio sandstone (38.1 and 50 mm diameters, 2:1 length‐to‐diameter ratio) were used in this characterisation study, with a rock porosity of 21.7 ± 1.2%, dry density 2036 ± 32 kg m^?3, and unconfined compressive and tensile strengths of 41 ± 3.28 and 2.3 ± 0.14 MPa, respectively. Geomechanical tests show that the rock behaves elastically between ～10 and ～18 MPa under unconfined conditions with associated Young's modulus and Poisson's ratio of 11.8 ± 2.8 GPa and 0.34 ± 0.01 GPa, respectively. Permeability abruptly decreases with confining pressure up to ～10 MPa and then stabilises at ～1 mD. Ultrasonic P‐ and S‐wave velocities vary from about 2.8–3.8 km s^?1 and 1.5–2.4 km s^?1, respectively, over confining and differential pressures between 0.1 and 35 MPa, allowing derivation of associated dynamic elastic moduli. Anisotropy was investigated using oriented core plugs for electrical resistivity, elastic wave velocity and attenuation, permeability, and tracer injection tests. Corvio sandstone shows weak transverse isotropy (symmetry axis normal to bedding) of <10% for velocity and <20% for attenuation.     

Effects of fluid displacement pattern on complex electrical impedance in Berea sandstone over frequency range 104–106 Hz

To better understand the effect of fluid distribution on the electric response of rocks saturated with oil and brine, we conducted experimental studies on the complex electrical impedance in a Berea sandstone, together with in situ acquisitions of oil distribution images employing a high‐resolution medical X‐ray computed tomography. We performed two tests of brine displacement by oil under high (10 MPa) and low (5 MPa) pressures, which were accompanied by fingering and stable displacement patterns, respectively. The measured complex impedance data were fitted to the Cole model to obtain the resistance, capacitance, peak frequency of the imaginary impedance, and the exponent α of the rock–fluid system. With increasing oil saturation, the resistance showed an increasing trend, whereas the other three parameters decreased. The fingering displacement exhibited lower resistance and capacitance than the stable displacement. The analysis of the resistance changes using a simple parallel connection model indicates that there are more components of residual brine in parallel connections in the fingering pattern than in the stable displacement pattern at the same saturation. We also interpreted the normalised changes in the capacitance (or apparent dielectric constant) with respect to the oil saturation via an analysis of the shape factor of fluid distribution based on the Maxwell–Wagner–Brugermann–Hanai model. The changes in the shape factor suggest that the pinch‐off of the brine in parallel connection by the oil is a dominant mechanism reducing the capacitance. In the stable displacement, most of the connections in the brine phase are immediately pinched off by oil displacement front at a local oil saturation of 65%. Conversely, in the fingering displacement, there is a transition from the bulk or layered brine to the pinched‐off at a local oil saturation below 60%. The analyses indicate that the difference in the fluid distribution under different fluid conditions is responsible for the non‐Archie behaviour.     

四川瀑布沟地区断裂破碎带的物质成分与断裂活动年代

本文主要研究断层泥中新生的粘土矿物特征,并研究断层泥中石英碎砾表面溶蚀的显微形貌结构特征。粘土矿物以X-射线衍射分析为主,石英碎砾则利用扫描电子显微镜对其显微形貌结构进行分析,并根据石英表面溶蚀的形貌特征来探讨断裂活动的相对年代     

Petrological features of a Numidian section in the Lucanian Apennine (southern Italy)

A continuous section of Numidian sandstones cropping out along the eastern margin of the Lucanian Apennine (southern Italy) has been studied in relation to its petrographic and geochemical aspects. Owing to their simple mineralogy, both chemical and petrographic classifications indicate that the sandstones are subarkoses. They are characterized by high mineralogical maturity, poor sorting, abundant siliciclastic matrix and subangular quartz grains. The principal composition is Q_80–94 F_6–20 L_0–1 corresponding to SiO₂/Al₂O₃ and Fe₂O₃/K₂O ratios ranging from 37·216 to 17·124 and from 1·182 to 0·514 respectively. Two quartz grain types were distinguished: deformed and undeformed quartz grains, the former generally subangular in shape and the latter rounded. Two distinct origins of detritus can be suggested; (i) the undeformed and rounded quartz grains derive from arenaceous continental sequences; (ii) the siliciclastic matrix, the deformed subangular quartz grains, the heavy minerals and the large crystals of K-feldspar probably derive from a crystalline basement formed by low–medium–high grade metamorphic rocks and granitoids. The Numidian subarkoses represent the mixing of these two components. Both kinds of detritus can be referred to the African Craton where crystalline basement is extensively overlain by Palaeozoic and Mesozoic sandstones. The different proportions of the two components in the mixture account for the variability of the sandstone composition and might explain the mixed Numidian successions cropping out in various sectors of the Mediterranean area. Copyright © 1998 John Wiley & Sons, Ltd.     

松辽盆地北部深层砂岩成岩作用与孔隙演化

松辽盆地北部深层砂岩成岩作用强,原生孔隙保存差。深层砂岩只有出现大量的次生孔隙,才能具有较好的储集性能。本文通过偏光显微镜、扫描电镜和显微热台等分析方法,研究了松辽盆地深层砂岩岩石类型,成岩作用特征和各成岩阶段砂岩孔隙的演化,表明胶结作用是影响深层砂岩储层物性变差的主要原因,浊沸石胶结物的溶解是深部砂岩储集性能得以改善的主要原因。