川中、川南过渡带须家河组储集砂体成因类型及特征

川中、川南过渡带地区在晚三叠世须家河期湖盆演化的各阶段沉积了不同成因类型的碎屑岩储积砂体,以须家河组二段、四段和六段最为发育,其成因类型主要有三角洲平原分流河道砂体、三角洲前缘水下分流河道砂体、河口坝砂体、滨湖砂滩和浅湖砂坝砂体。通过野外剖面、岩芯、测井曲线以及样品的薄片鉴定和扫描电镜分析,对各成因类型砂体的分布特征进行了研究,进而对各类砂体的结构构造、物性特征进行了对比研究。     

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

U-Pb-Hf isotopic data from detrital zircons in late Carboniferous and Mid-Late Triassic sandstones,and also Carboniferous granites from the Tauride and Anatolide continental units in S Turkey: implications for Tethyan palaeogeography

ABSTRACT

Zircons from Carboniferous sandstones (three samples) and Mid-Late Triassic sandstones (four samples) from the Tauride and Anatolide continental units were analysed for U-Pb-Hf isotopes. For comparison, zircons were also analysed from Carboniferous granites of the Afyon Zone, Anatolides (three samples). A NE African/Arabian source is inferred for both the Carboniferous sandstones of the Taurides (Alada?) and the Anatolides (Konya Complex). In contrast, the Carboniferous Karaburun Melange is characterised by a NW African provenance. A prominent Devonian population occurs in the Carboniferous Karaburun Melange, characterised by mainly positive ε_Hf(t) values that differ significantly from those of the Devonian granites of the Sakarya continental crustal unit (Pontides). Middle-Late Triassic Tauride sandstones include minor Palaeozoic and Early Mesozoic zircons. In contrast, Devonian and Carboniferous zircons are relatively abundant in Late Triassic sandstones of the Karaburun Peninsula. The Hf isotopic compositions of 25 Carboniferous-aged zircons from three samples of Mid-Late Triassic sandstone and one of Late Carboniferous age (one sample) overlap with the ε_Hf(t) values of Carboniferous arc-type granites in the Anatolides. Taking account of the available U-Pb and Lu-Hf isotopic data from comparative crustal units, the Devonian zircon populations from the melanges in the Karaburun Peninsula and the Konya Complex are inferred to have a westerly source (e.g. granitic rocks of Aegean region or central Europe). A tectonic model is proposed in which Palaeozoic Tethys sutured during the late Carboniferous in the west (Aegean region westwards), leaving an eastward-widening oceanic gulf in which sandstone turbidites accumulated, including Devonian zircons.     

基于Weibull分布的红砂岩颗粒崩解破碎演化规律

红砂岩在我国分布广泛，由于含水率的变化使其崩解破碎十分显著。采用湖南株洲地区的红砂岩样，进行室内静态与扰动崩解试验。基于Weibull分布建立了红砂岩颗粒崩解破碎级配曲线演化模型，分析了模型参数λ与k的意义。分析表明，Weibull分布参数λ与k的大小及变化速率体现了红砂岩颗粒崩解破碎的演化过程。在建立模型的基础上，求得了相对崩解比的计算公式，并验证了计算公式的正确性。依据试验结果与模型计算值，讨论了耐崩解性指数与崩解比的异同及所采用试验方法的不同对试验结果造成的影响。在已有成果的基础上，验证了Weibull分布模型应用于岩石颗粒崩解破碎演化过程的可行性。     

准噶尔盆地北部地区的姜石特征及地质意义

本文讨论了准噶尔盆地北部地区姜石层的特征及成因,北准地区新第三系至第四系出现多层姜石层,这些姜石层的存在,表明该地区具有形成第三系可地浸砂岩型铀矿的良好前景。     

The geology of the Taparko gold deposit, Birimian greenstone belt, Burkina Faso, West Africa

The Taparko gold deposit, located in the eastern branch of the Proterozoic Birimian Bouroum-Yalogo greenstone belt (Burkina Faso) consists of a network of quartz veins developed in a N 170° trending shear zone (250 m wide, 4 km long) superimposed on the regional Birimian structural pattern. The quartz vein network is composed of: (a) a dominant array of quartz veins (type 1), parallel to the shear zone and comprising strongly deformed dark quartz exhibiting foliation, layering, ribbon, tension gashes, etc.; (b) oblique and subparallel related veins (type 2) of gray to white weakly deformed quartz crosscutting the dominant quartz veins resulting in breccia structures; and (c) shallow dipping veins (type 3), cross-cutting veins types 1 and 2 and filled by undeformed white buck structure quartz. Cross-cutting relationships and different quartz types in different veins and within individual veins imply a concomitant filling of the veins during the progressive deformation. Initial sinistral transcurrent shearing evolved with time to sinistral reverse shearing. Metallic minerals occur only in type 1 and 2 veins and were deposited in two stages, with native gold being related to second stage sulfides. Gold (and chalcopyrite) precipitated preferentially upon the surfaces of fractured pyrite grains in low-pressure sites (pressure shadow zones) around and/or within the sulfide grains (along subsequently annealed fractures). The formation of the South Taparko deposit can be divided into a succession of events: (a) during the first event, N 170°-directed sinistral transcurrent shearing resulted in a N 20° mylonitic foliation and fractured rock which allowed H₂O-, CO₂- and SiO₂-rich fluids to circulate and deposit quartz with buck texture; (b) during the second event, type 1 quartz was strongly deformed and type 2 veins formed with sigmoidal shapes as viewed on a horizontal plane; and (c) during the third event, the sinistral transcurrent shearing evolved to sinistral reverse shearing and the deformation style evolved correspondingly from ductile to brittle-ductile. During the last phase of deformation gold nucleated and deposited in low-pressure zones. Received: 9 July 1997 / Accepted: 23 March 1998     

松辽盆地西南部层间氧化带砂岩型铀矿找矿方向

松辽盆地西南部层间氧化带砂岩型铀矿找矿方向赵忠华刘广传崔长远（核工业东北地质局２４０研究所,沈阳１１００３２）关键词开鲁盆地层间氧化带砂岩型铀矿找矿松辽盆地西南部系指内蒙古自治区哲里木盟及昭乌达盟所辖地区,西临大兴安岭,南依辽西山地,面积约６００００...     

西湖凹陷西次凹古近系花港组—平湖组深层油气成藏过程

西湖凹陷西次凹古近系花港组和平湖组深层油气资源丰富，是东海陆架盆地勘探开发新领域，受储层差异致密化影响，油气成藏机理复杂。为了厘清西次凹深层油气成藏过程，本文通过流体包裹体岩相学特征、显微测温、激光拉曼光谱、包裹体所含油气地球化学等实验分析，结合构造演化、地层埋藏史、热史等，开展了系统的储层特征、油气成藏期次、成藏过程研究。结果表明，花港组深层（>4000 m）和平湖组储层均已致密化，溶蚀孔隙是主要的储集孔隙类型；花港组和平湖组均发育两期油气包裹体，早期含油包裹体较多，晚期以天然气包裹体为主，成藏时间分别为龙井运动期和冲绳运动期，以晚期天然气成藏最为关键。包裹体中油气地球化学特征类似，反映生烃母质以高等植物生源为主，低等生物为辅，与平湖组煤系烃源岩特征一致。冲绳运动叠加平湖组生气增压是晚期天然气成藏的主要动力，此时H10段及以上储层未致密化。根据储层致密化与成藏时序匹配关系可将西次凹M构造深层油气藏类型划分为常规型、先成藏后致密型、先致密后成藏型和边成藏边致密型4种。本文成果可为研究区下一步致密砂岩气的勘探开发部署提供重要的理论依据。     

商河县馆陶组热储地热尾水回灌可行性研究

从回灌热储层条件、动力场特征、水化学及库容条件等方面,研究了商河县地热回灌地质条件。结合区内地热资源开发利用现状与回灌工程技术条件,对商河县地热尾水回灌的可行性进行了研究,认为在现有条件下,可逐步推行地热尾水回灌。     

云南东川新山含金剪切带型金矿

新山金矿属构造剪切带控制的典型金矿床,产于中元古界昆阳群美党组(Pt2m)中部变质石英砂板岩中。规模大、品位富、易采易选。矿区构造——含金剪切带与土壤地球化学金异常,是寻找该类金矿的重要标志。