山区暖带的农业生态效应——以秦岭-黄淮平原交界带为例

分析了山区暖带对当地农业生态环境的影响和暖带资源利用中应注意的若干问题．     

多覆盖地区花岗岩接触带及其控矿特征的遥感研究

本文主要介绍应用TM图像对西秦岭地区的中川岩体进行研究的成果,即研究在多植被、多黄土覆盖的复杂条件下,如何依据接触带蚀变岩的遥感图像像元亮度值及实验室测得的光谱曲线特征,区分不同的岩体接触带类型,并探讨它们对金矿的控制作用。     

Structural control of the morphometry of open rock basins, Kananaskis region, Canadian Rocky Mountains

The morphometry of chutes (couloirs), rock funnels, and open cirques are related to the structure of dissected rock masses in the Kananaskis region of the Canadian Rocky Mountains. Data for ten morphometric variables were derived from digital elevation models of 56 open rock basins. The basins were classified structurally according to the relative orientations of bedding planes and the rock slopes. A hypothesis of no differences in morphometry among structural classes is rejected from the results of nonparametric analysis of variance and paired comparisons of rank scores. Basins on dip and overdip slopes have a distinct size, and those on anaclinal slopes have a distinct width and shape. Variation in morphometry from low compactness and area/relief (chutes) to high compactness and low area/relief (funnels) to high compactness and area/relief (open cirques) corresponds to a change in dominant structure from orthoclinal to dip-overdip to underdip to anaclinal. The dip of bedding planes relative to the slope of rockwalls controls the mode of initial displacement of joint blocks and, thereby, the spatial distribution of the retreat of rockwalls. The angle between the rock slope and the strike of dipping strata determines whether beds of differing stability form chutes and buttresses (orthoclinal slopes), or extend across rockwalls (cataclinal and anaclinal slopes) and retreat at similar rates to form funnels and open cirques. The optimal structure for large compact rock basins is anaclinal, and the least favourable is cataclinal dip-overdip slopes. Topoclimate and other geologic structures may account for variance in morphometry not explained by differences among structural classes.     

新疆可可塔勒铅锌成矿带成矿规律

阿尔泰山南缘可可塔勒铅锌成矿带主要由麦兹、克兰、冲乎尔 3个泥盆纪含矿火山沉积盆地组成 ,产于陆缘裂谷带内侧 (近陆一侧 ) ,下泥盆统康布铁堡组上亚组流纹—英安质火山沉积建造是主含矿层位。按特征矿物组合的不同可分为块状硫化物型、磁铁硫化物型和萤石方铅矿型 3个矿化类型。含矿盆地中规模较大的矿床产于断陷深度大、火山活动强烈的次级火山洼地中。铅锌矿化空间上具有南北分带、东西分区的分布规律性 ,时间上具有较明显的演化性 ,由早到晚 (层位自下而上 )典型的演化序列为 :Fe→ Fe、Pb、Zn→ Pb、Zn、Ag→Pb、Ag( F,Ba)。不同级别的构造控制了不同级别的矿化 ,构成了构造控矿系列     

The Loess in the Qinling Mountains and Its Records of Palaeoenvironmental Changes

The Fengzhou loess section is very typical in the Qinling Mountains. The section, which is about 82 m thick and underlain by Neogene red clays, consists of 33 layers of loess and 33 layers of palaeosol. It covers the Brunhes normal polarity zone and Matuyama reversed polarity zone, and the B/ M boundary is located in the middle part of loess layer 8 (L8). The loess of the Matuyama reversed polarity zone records the Jaramillo, Olduvai and Reunion normal polarity subchrons. The boundary between the Matuyama reversed polarity zone and Gauss normal polarity zone (M / Ga) appears on the lithological boundary between loess and Neogene red clays. Loess accumulation in the Fengzhou section started before 2.48 Ma B.P. Based on the stratigraphical structure, the material composition and magnetic susceptibility curve of the Fengzhou loess section, the palaeoclimatic changes during the last 2.48 Ma in the Qinling Mountains are subdivided into 66 cold-dry and warm-humid stages, equivalent to 33 climatic cycles. The     

秦岭地区铅锌矿成矿浅析

秦岭横亘中国中部,地跨七省,铅锌矿产资源成矿规律明显。迄今已探明３３个矿床,可划分八个成因类型,包括矽卡岩型,热液型,石英脉型,构造蚀变岩型,沉积型,火山沉积型,火山岩型及沉积再造型。     

西秦岭三叠系一个浊积岩序列金的地球化学特征

本文在详细分析沉积韵律、沉积构造、成分及粒度的基础上,论证了四川省若尔盖县阿西乡牙相一带上三叠统卡车组一套浊积岩沉积。通过对牙相浊积岩序列的２３个采自各浊积旋回各层段的系列样品的金分析,发现这一浊积岩序列具有：以泥质粉砂岩、泥质岩为主的鲍玛序列的Ｄ—Ｅ段与其上旋回的以含砾砂岩、粗砂岩为特征的Ａ段含金量呈线性关系,表明这两段之间元Ａｕ元素发生了循环,进一步揭示了浊积岩具有金的可迁移性这一矿源层的重要特征。另外,砂质单元金含量比细粒的粉砂岩和泥岩要高,从浊积岩序列的底部旋回至上部回金的含量降低并由不稳定到稳定     

丹凤地区刘岭群倒转变质带及其地质意义

根据变质矿物组合和变质带的特征,结合变形构造研究,认为丹凤地区的刘岭群曾遭受过中压相系的变质作用,随后又被褶皱及剪切推覆作用改造,使变质带倒转、变薄。文章认为,本区刘岭群在时代上不能与西部邻区的中泥盆统地层对比。     

河南省内乡县银洞沟银金多金属矿成矿年龄: 热液锆石LA-MC-ICP-MS U-Pb测年

北秦岭构造带广泛发育与古生代洋壳俯冲和碰撞造山有关的岩浆活动以及与造山过程有关的变质作用,但古生代热液脉型矿床在北秦岭构造带少见报道。银洞沟银金多金属矿为北秦岭构造带东部的一处中型热液脉型矿床,本文通过对该矿床赋矿围岩和含矿石英脉中锆石开展LA- MC- ICP- MS U- Pb测年和锆石成因研究,确定了矿床的形成时代,并探讨了矿床的成矿动力学背景。结果表明赋矿围岩黑云母二长花岗岩的形成时代为431. 4±2. 1 Ma,含矿石英脉中锆石结晶年龄为419. 4±5. 9 Ma,石英脉中锆石的岩相学、锆石中矿物和流体包裹体及锆石微量元素研究表明419. 4 Ma代表矿床的形成时代。结合前人的研究结果,确定银洞沟银金多金属矿为形成于晚志留世的造山型矿床,成矿作用与碰撞期后～420 Ma的变质作用密切相关,成矿流体来源于地层的变质脱水,成矿物质主要来源于秦岭岩群和二郎坪群。     

秦岭商丹断裂带的构造样式与变形分析

商丹断裂带作为扬子板块与华北板块的缝合带,在秦岭造山带中占据重要的地位。对其进行精细的构造研究,是了解扬子板块与华北板块相互作用过程的关键。研究工作在商丹断裂带东段展开,对该带进行了详细的野外观察、显微构造观察、糜棱岩化过程中温度的估算、有限应变测量、差异应力的计算以及糜棱岩化过程中运动学涡度的计算。变形温压条件指示糜棱岩形成于中-高绿片岩相到低角闪岩相变质条件。差异应力计算结果指示商丹带具备大型构造动力特征。涡度分析表明该断裂带的变形以纯剪切作用占据主导作用,但包含有简单剪切的分量,从而证明了扬子板块与华北板块之间具有以碰撞挤压为主的斜向汇聚方式。