裂缝智能检测技术研究及其在埕岛潜山的应用

断裂(裂缝)对油气藏既有破坏又有保存作用。胜利埕岛奥陶系潜山油藏受裂缝控制,非均质性强,勘探目标预测难度大。本文以地震边缘检测为先验信息和启发因子,在自适应地震相干数据体上进行蚂蚁体追踪,精细检测裂缝,弥补了单一相干体检测分辨低的缺陷,获得了与钻井和实际地下情况吻合度更高的裂缝检测结果。对该区的油气勘探起到了指导作用。     

Snow model sensitivity analysis to understand spatial and temporal snow dynamics in a high‐elevation catchment

In this paper, we addressed a sensitivity analysis of the snow module of the GEOtop2.0 model at point and catchment scale in a small high‐elevation catchment in the Eastern Italian Alps (catchment size: 61 km²). Simulated snow depth and snow water equivalent at the point scale were compared with measured data at four locations from 2009 to 2013. At the catchment scale, simulated snow‐covered area (SCA) was compared with binary snow cover maps derived from moderate‐resolution imaging spectroradiometer (MODIS) and Landsat satellite imagery. Sensitivity analyses were used to assess the effect of different model parameterizations on model performance at both scales and the effect of different thresholds of simulated snow depth on the agreement with MODIS data. Our results at point scale indicated that modifying only the “snow correction factor” resulted in substantial improvements of the snow model and effectively compensated inaccurate winter precipitation by enhancing snow accumulation. SCA inaccuracies at catchment scale during accumulation and melt period were affected little by different snow depth thresholds when using calibrated winter precipitation from point scale. However, inaccuracies were strongly controlled by topographic characteristics and model parameterizations driving snow albedo (“snow ageing coefficient” and “extinction of snow albedo”) during accumulation and melt period. Although highest accuracies (overall accuracy = 1 in 86% of the catchment area) were observed during winter, lower accuracies (overall accuracy < 0.7) occurred during the early accumulation and melt period (in 29% and 23%, respectively), mostly present in areas with grassland and forest, slopes of 20–40°, areas exposed NW or areas with a topographic roughness index of ?0.25 to 0 m. These findings may give recommendations for defining more effective model parameterization strategies and guide future work, in which simulated and MODIS SCA may be combined to generate improved products for SCA monitoring in Alpine catchments.     

Palaeokarst and rauhwacke development,mountain uplift and subaerial sliding of tectonic sheets (northern Sierra de los Filabres,Betic Cordilleras,Spain)

The rauhwackes near Serón in the northern Sierra de los Filabres (S Spain), previously considered as true tectonic breccias, are reinterpreted on the basis of sedimentological, geomorphological and geometrical evidence as subaerial or nearly subaerial sedimentary deposits. Channel fills, parallel lamination, cross-lamination, graded bedding, sedimentary clastic dykes and other sedimentary structures and features occur in the rauhwacke body. These sedimentary rocks correspond to continental deposits of alluvial and karstic origin deposited over a karstified erosional surface of Nevado–Filabride marbles. Although no fossils have been found in the rauhwackes, a Tortonian age for these rocks is suggested on the basis of structural arguments and lithostratigraphic data from the nearby Almanzora basin. The rauhwackes were buried by slabs of Alpujarride rocks that gravitationally slid over them during the uplifting of the Sierra de los Filabres.     

西秦岭印支期高Sr/Y花岗岩类的成因及动力学背景——以同仁地区舍哈力吉岩体为例

西秦岭印支期花岗岩类分布十分广泛,形成时代集中于248~234Ma和224~211Ma两个阶段.其中,夏河岩体(248~238Ma)和温泉岩体(223~216Ma)的部分样品被厘定为埃达克岩(Sr>400×10^-6,Yb<2×10^-6),指示陆壳厚度大于50km.本文对西秦岭同仁地区舍哈力吉岩体进行了锆石U-Pb定年、岩石学、地球化学和Sr-Nd同位素研究.舍哈力吉岩体主要由石英二长岩组成,同时含有许多暗色镁铁质微粒包体(MME).寄主岩中发育少量的钾长石巨晶,并且部分巨晶具有环斑结构.舍哈力吉石英二长岩化学成分比较均一,而且也显示出类似埃达克岩的一些地球化学特点,如富SiO₂(66.07%~67.52%)和Al₂O₃(14.85%~15.95%),高Sr(560×10^-6~692×10^-6),低Y(11.4×10^-6~12.9×10^-6)和Yb(0.99×10^-6~1.09×10^-6),并具有较高的(La/Yb)_N比值(27.8~34.3)和微弱的负Eu异常(δEu=0.77~0.95).锆石U-Pb测年结果为234.1±0.5Ma,表明其形成于印支早期.岩石为偏铝质、高钾钙碱性系列且K₂O/Na₂O>1,高Mg^#(59~60)、Cr(69.1×10^-6~81.2×10^-6)和Ni(31.6×10^-6~36.1×10^-6),以富集大离子亲石元素(Rb、Ba、Th、U)而相对亏损高场强元素(Nb、Ti、P)为特征,(⁸⁷Sr/⁸⁶Sr)_i=0.7075~0.7077,ε_Nd(t)=-6.3~-6.1,亏损地幔模式年龄为1.25~1.33Ga.舍哈力吉石英二长岩起源于石榴角闪岩相古老下地壳的部分熔融,之后经历了壳幔岩浆混合作用和以斜长石为主的分离结晶作用.寄主岩的环斑结构和相对一致的地球化学特征,很可能是高温幔源熔体对壳源富钾高黏度岩浆改造所导致的晶粥快速再活化的结果.西秦岭在印支早期可能并未经历显著的地壳加厚过程.西秦岭印支早期花岗岩类形成于活动大陆边缘局部伸展环境,可能与古特提斯洋壳俯冲极性的改变有关.     

陕西小秦岭地区熊耳群火山岩型铁(钛)矿及资源潜力

对小秦岭地区熊耳群地层的分布作了概述。在熊耳群地层分布区划出了坝源—洛源(A区)、三岔—石门(B区)和西峪河—梧桐河(C区)三个火山岩型铁矿资源潜力区。阐述了各潜力区的铁矿成矿条件,对潜在资源量作了测算。预测全区300 m以上铁矿潜在资源量为≥9.4亿吨,钛铁矿≥300万吨。     

西秦岭地区晚二叠世—早三叠世沉积相分析和沉积古环境再造

青海省同仁地区处于祁连和秦岭造山带的接合部，构造演化历史悠久。本次工作在该地区隆务河一带发现较好的二叠—三叠系剖面。将该剖面从下而上划分为上二叠统石关组、下三叠统果木沟组和江里沟组，其中江里沟组又进一步划分为下部的浊积岩段和上部的风暴岩段，初步确定了二叠—三叠纪的界线。沉积序列、沉积相和沉积物表明上二叠统石关组和下三叠统果木沟组为一套陆源碎屑浊积岩，下三叠统江里沟组下部为一套不纯的内碎屑浊积岩，而下三叠统江里沟组上部为风暴岩沉积。根据沉积相和火山岩夹层的地球化学特征认为该地区上二叠统石关组和下三叠统果木沟组处于半深海的活动大陆边缘，下三叠统江里沟组早期的浊积岩段处于较稳定的半深海大陆边缘。根据沉积相和遗迹化石，恢复了晚二叠世—早三叠世的海平面变化特征。     

南秦岭中段中、上志留统金矿化特征及控制因素分析

区域地球化学测量和金矿勘查工作显示,中、上志留统是南秦岭中段继泥盆系之后的又一套赋金地层,这套地层的分布区存在一条近EW向展布的金矿化带,宏观上,金矿化带的展布受青泥河-留坝复背斜和大河店-长坪-留坝区域性断裂带的控制.金矿（化）点和金矿（化）体的产出受层位、岩性、煌斑岩脉、火山活动、褶皱、层间构造破碎蚀变带、标高及氧化作用等因素的联合控制.矿体呈似层状产出,由多个呈串珠状展布的透镜体组成,金矿石类型以微细浸染型为主,属金-毒砂-黄铁矿建造.通过对已有矿（化）点和区域水系沉积物异常区进一步工作,有望找到中-大型金矿产地1～2处.     

The Himalayan Collisional Orogeny: A Metamorphic Perspective

This paper introduces how crustal thickening controls the growth of the Himalaya by summarizing the P-T-t evolution of the Himalayan metamorphic core. The Himalayan orogeny was divided into three stages. Stage 60–40 Ma: The Himalayan crust thickened to ~40 km through Barrovian-type metamorphism (15–25 °C/km), and the Himalaya rose from <0 to ~1000 m. Stage 40–16 Ma: The crust gradually thickened to 60–70 km, resulting in abundant high-grade metamorphism and anatexis (peak-P, 15–25 °C/km; peak-T, >30 °C/km). The three sub-sheets in the Himalayan metamorphic core extruded southward sequentially through imbricate thrusts of the Eo-Himalayan thrust, High Himalayan thrust, and Main Central thrust, and the Himalaya rose to ≥5,000 m. Stage 16–0 Ma: the mountain roots underwent localized delamination, causing asthenospheric upwelling and overprinting of the lower crust by ultra-high-temperature metamorphism (30–50 °C/km), and the Himalaya reached the present elevation of ~6,000 m. Underplating and imbricate thrusting dominated the Himalaya’ growth and topographic rise, conforming to the critical taper wedge model. Localized delamination of mountain roots facilitated further topographic rise. Future Himalayan metamorphic studies should focus on extreme metamorphism and major collisional events, contact metamorphism and rare metal mineralization, metamorphic decarbonation and the carbon cycle in collisional belts.     

Collision leading to multiple-stage large-scale extrusion in the Qinling orogen: Insights from the Mianlue suture

The geologic framework of the Phanerozoic Qinling–Dabie orogen was built up through two major suturing events of three blocks. From north to south these include the North China craton (including the north Qinling block), the Qinling–Dabie microblock, and the South China craton (including the Bikou block), separated by the Shangdan and Mianlue sutures. The Mianlue suture zone contains evidence for Mesozoic extrusion tectonics in the form of major strike–slip border faults surrounding basement blocks, a Late Paleozoic ophiolite and a ca. 240–200 Ma thrust belt that reformed by 200–150 Ma thrusts during A-type (intracontinental) subduction. The regional map pattern shows that the blocks are surrounded by complexly deformed Devonian to Early Triassic metasandstones and metapelites, forming a regional-scale block-in-matrix mélange fabric. Five distinct tectonic units have been recognized in the belt: (1) basement blocks including two types of Precambrian basement, crystalline and transitional; (2) continental margin slices including Early Paleozoic strata, and Late Paleozoic fluviodeltaic sedimentary rocks, proximal and distal fan clastics, reflecting the development of a north-facing rift margin on the edge of the South China plate; (3) out of sequence oceanic crustal slices including strongly deformed postrift, deep-water sedimentary rocks, sheeted dikes, basalts, and mafic–ultramafic cumulates of a Late Paleozoic ophiolite suite, developing independent of the rift margin in a separate basin; (4) out-of-sequence island-arc slices; (5) accretionary wedge slices. All the tectonic units were deformed during three geometrically distinct deformation episodes (D₁, D₂ and D₃ during 240–200 Ma). Units 2–4 involved southward thrusting and vertical then southward extrusion of about 20 km of horizontal displacement above the autochthonous basement during the D₁ episode. Thrust slices 20 km south of the Mianlue suture are related to this vertical extrusion due to the same rock assemblages, ages and kinematics. The D₂ and D₃ episodes folded all the units in a thick-skinned style about east–west (D₂) and west–northwest (D₃) axes in the Mianlue suture zone. An early foreland propagating sequence of accretion of Late Paleozoic rocks deposited above the Yangtze craton is not involved in D₁ deformation but is temporally equivalent to the D₂ and D₃ deformation in the Mianlue suture. Two stages of strike–slip faulting mainly occurred at the end of D₂ and D₃, respectively. During D₂ deformation, the Bikou block was obliquely indented to the ESE into the Mianlue suture, rather than being thrust over the Mianlue suture from the north as a part of the Qinling–Dabie microblock. During D₃ deformation, however, the Bikou block was bounded by the south boundary fault of the Mianlue suture, and the Yangpingguan fault on the south. These faults are coeval strike–slip faults, but of opposite senses, and accommodated minor southwestward extrusion of the Bikou block into Songpan–Ganze orogen. The other basement blocks north of the Mianlue suture were extruded eastward by about 20 km of lateral displacement, based on the offset of the Wudang dome, during the D₃ episode due to the northeastward indentation of the Hannan complex of the South China craton. Post-D₃ emplacement of granite, cutting across the strike–slip faults such as the Mianlue suture, provides a minimum age of 200 Ma for D₃ deformation. Therefore, based on insights from the evolution of the Mianlue suture, the D₂ and D₃ episodes in the Mianlue suture and its neighbors are not responsible for and associated with the two-stage extrusion of the Dabie UHP-HP terranes from the Foping dome to the present erosional surface (more than 350 km).