龙门山前陆盆地形成与演化

本文将龙门山前陆盆地和龙门山冲断带作为一个地质整体进行了研究，并将构造地层学和层序地层学相结合的综合地层学的分析方法作为分析龙门山前陆盆地沉积的基础，以不整合面和其对应面将盆地充填序列分割为构造层序和层序，对应于不同成盆期和同一成盆期不同演化阶段，阐明龙门山前陆盆地充填序列和沉积体积三维空间配置形式及其在时间上的演化，初步建立了龙门山前陆盆地地层格架，进而研究龙门山冲断带逆部推覆作用对龙门山前陆盆     

昆仑山口西8.1级地震后青藏高原北部地区地震活动初步研究

利用相关震例分析了昆仑山口西8．1级地震后青藏高原北部地区未来1～3年地震活动特征．结果表明,沿东昆仑构造带及邻近地区发生Ms≥7．0地震后青藏高原北部地区中强地震活动有增强的趋势,祁连山地震带和东昆仑地震带的地震活动具有交替发生的特征,未来1～3年中强地震主体活动区为大型走滑活动断裂上应力转换部位和挤压会聚构造区,如东昆仑断裂带中东段和祁连山地震带中东段和西段。     

地物化综合信息在东天山西段的找矿预测结果

利用区域地物化资料,采用多元统计方法及GIS空间分析技术,通过对东天山成矿带中黄山铜镍矿床、小热泉子铜锌矿床的地质、地球物理、地球化学特征的分析,对东天山西段进行了有色金属矿床找矿靶区预测。预测结果认为:色尔特能、铜花山—硫磺山、米什沟、马鞍桥、彩华沟是今后找寻大型有色金属矿床的重要靶区。     

塔里木盆地库鲁克塔格奥陶系牙形石色变指标与有机质成熟度的关系

应用牙形石色变指标(CAI)对塔里木盆地孔雀河斜坡东北段南雅尔当山剖面奥陶系有机质成熟度进行了研究,得出的结果是南雅尔当山却尔却克组产出的牙形石色变指标CAI值为2~2.5,有机质处于成熟阶段.综合研究认为,本区奥陶系烃源岩在中奥陶世逐渐进入生烃门限并快速成熟;在奥陶纪末达到经历的最大古地温,顶部为80℃,底部为180℃,之后遭受抬升剥蚀,区域剥蚀量在2 300 m左右.本区奥陶系烃源岩存在3种生烃类型:第Ⅰ种为南雅尔当山型,为非有效烃源岩;第Ⅱ种为群克1井部分生烃型,奥陶纪末抬升剥蚀后埋深在2 500 m以上的烃源岩(Ⅱ-1型)停止生烃,埋深在2 500 m以下的烃源岩(Ⅱ-2型)持续生烃;第Ⅲ种为二次生烃型,当中新生代的快速沉积使Ⅱ-1型烃源岩顶部埋深达到3 200 m时,相同层位的烃源岩达到经历的最大古地温,开始二次生烃,生烃潜力最大.     

阿尔金山中-新生代隆升历史研究进展

阿尔金断裂左旋走滑的同时,伴随较大的逆冲分量,总体成花状构造,引起阿尔金山的垂向隆升,大量证据表明阿尔金山自中生代以来主要经历了6次快速隆升事件,即白垩纪、晚始新世—早渐新世、早中新世、中中新世、上新世、早更新世末—中更新世初。新生代的五期重要的隆升事件,与欧亚大陆拼合后的印度板块持续向北的挤压有关,俯冲引起青藏高原的阶段性快速隆升,是阿尔金山隆升的动力学机制。     

基于实测值分段线性内插模型的InSAR视线向同震位错分解-以青藏高原昆仑山MemＳsub8.1地震为例x,auto,auto,415px);}stylehf=httprztl.com business week launch

利用现场GPS定位的实测值，在尝试过最小二乘拟合并取得初步成果的基础上，进而采用更符合破裂带形态的线性立方插值函数，在破裂带主断面上，建立起一种理论与实测相结合的InSAR视线向(LOS)变化量的分解方程，得到了InSAR视线向位移分解的具有唯一性的解析解. 本文的解析法吸纳了GPS定点实测值的精度优势，利用InSAR全天候、准实时获取连续形变场的技术特点，通过数学近似，最终获得了主破裂带上连续变化的水平位错及垂直位错同震形变曲线.      

Inversion of coseismic stress-triggered fault slips using borehole strainmeter observations

Coseismic stress-triggering is becoming a new hot spot of research. Coseismic strain steps recorded by borehole strainmeters are particularly valuable in studying coseismic stress-triggered fault slips. Based on the theory of dis location, one can invert the triggered fault slips with such data if he/she has a well understanding about the local faults. Genetic algorithm can be applied to significantly raise the efficiency of searching a best solution among all possibilities in this kind of inversion. A testifying check of the program and analyses of each parameter＇s influence may further enhance the reliability of inversion results. Taking complexity of geological structure into account, the inversion results should be regarded as the predominant property or a comprehensive effect of triggered local faults＇ activities. As an attempt, we inverted the assumingly active faults＇ slips triggered by the Ms=8.1 Kunlun Mountain earthquake over Beijing area.     

The effect of mountainous topography on moisture exchange between the “surface” and the free atmosphere

Typical numerical weather and climate prediction models apply parameterizations to describe the subgrid-scale exchange of moisture, heat and momentum between the surface and the free atmosphere. To a large degree, the underlying assumptions are based on empirical knowledge obtained from measurements in the atmospheric boundary layer over flat and homogeneous topography. It is, however, still unclear what happens if the topography is complex and steep. Not only is the applicability of classical turbulence schemes questionable in principle over such terrain, but mountains additionally induce vertical fluxes on the meso-γ scale. Examples are thermally or mechanically driven valley winds, which are neither resolved nor parameterized by climate models but nevertheless contribute to vertical exchange. Attempts to quantify these processes and to evaluate their impact on climate simulations have so far been scarce. Here, results from a case study in the Riviera Valley in southern Switzerland are presented. In previous work, measurements from the MAP-Riviera field campaign have been used to evaluate and configure a high-resolution large-eddy simulation code (ARPS). This model is here applied with a horizontal grid spacing of 350 m to detect and quantify the relevant exchange processes between the valley atmosphere (i.e. the ground “surface” in a coarse model) and the free atmosphere aloft. As an example, vertical export of moisture is evaluated for three fair-weather summer days. The simulations show that moisture exchange with the free atmosphere is indeed no longer governed by turbulent motions alone. Other mechanisms become important, such as mass export due to topographic narrowing or the interaction of thermally driven cross-valley circulations. Under certain atmospheric conditions, these topographical-related mechanisms exceed the “classical” turbulent contributions a coarse model would see by several times. The study shows that conventional subgrid-scale parameterizations can indeed be far off from reality if applied over complex topography, and that large-eddy simulations could provide a helpful tool for their improvement.     

青海红土山滑坡工程的治理方案选择

概述了青海省省道S101线改建工程红土山段滑坡体的地形地貌及地层岩性，滑坡体变形特征以及变形原因分析；计算滑坡推力，并依据滑体推力计算值选择滑坡治理方案；对治理方案技术参数以及同类项目选择治理方案应注意的问题进行了描述。     

阿尔泰东南缘布尔根地区造山带型金矿床硫铅同位素特征及地质意义

阿尔泰东南缘布尔根地区造山带型金矿床受韧性剪切带控制,有两种矿化类型:一为石英脉型,另一种为糜棱岩型。糜棱岩型金矿硫化物的δ~(34)S 值变化于-10.009‰～-2.819‰,平均值为-5.29‰,石英脉型金矿硫化物的δ~(34)S 值变化于-0.062‰～-1.688‰,平均值为-1.0575‰。布尔根地区金矿床的金属硫化物样品具有较窄的~(206)Pb/~(204)Pb 比值,变化于17.71～18.35;相对较高的~(207)Pb/~(204)Pb 比值为15.31～15.64和~(208)Pb/~(204)Pb 比值为37.13～38.07,铅同位素分析结果表明,该区金矿床成矿物质铅来源于地幔及下地壳。硫、铅同位素特征反映了布尔根地区金矿床成矿物质具有多来源特征。