论海水养殖的养殖容量

养殖容量应是一个包含环境、生态和经济等诸多因素的综合概念。养殖容量可定义为：单位水体内在保护环境、节约资源和保证应有效益等各个方面都符合可持续发展要求的最大养殖量。合理地利用养殖容量就是要形成一个结构优化和功能高效的养殖生态系统,使所投入的物质得到反复循环、初级生产力得到多途径利用,从而提高生产效益和养殖效益,避免物质的浪费及自身和环境的污染。从养殖生态系统运转的驱动因素来分析,主要靠太阳辐射直接提供能源的系统,如海带养殖系统、扇贝筏式养殖系统等,可称为自养型或自然营养型养殖系统;主要靠人工投饲来提供能源的系统,如对虾池塘养殖系统、吃食性鱼类网箱养殖系统等,可称为异养型或人工营养型养殖系统。这两类养殖系统在生态学上有很多互补性,它们的复合可提高养殖水体的养殖容量。     

基于GIS的近海剩余环境容量计算模型

探讨一种基于GIS 克里格插值方法的剩余环境容量计算方法, 通过GIS 地统计分析插值模型将水质模拟问题转化为数学统计问题, 充分利用水质水体、沉积物监测数据, 采用克里格插值法对污染物浓度和水深在局部海域内进行插值, 将研究区域离散为一个个的均匀栅格单元, 比较每个单元污染物浓度与水质目标之间的差值, 从而估算得到研究海域的剩余环境容量。通过2009 年8 月锦州湾剩余环境容量的计算实例表明, 基于GIS 的剩余环境容量初步计算方法在资料缺乏地区是十分简便、有效的, 这为海域开发利用区环境管理与规划提供了参考。     

基于能量法的大直径超长钢管桩溜桩问题分析

海洋桩平台采用大直径超长桩,由于桩、锤的重量很大,沉桩过程中经常发生溜桩现象。因此为了便于打桩控制,判断溜桩的范围是非常必要的。结合实际工程对溜桩的过程和发生机理进行了探讨;利用PCPT原位测量资料,基于能量法建立了判断溜桩范围的分析计算方法。针对南海油田典型的平台桩沉桩过程中的溜桩问题进行了分析计算,验证了所提出的方法的合理性,可供桩设计以及沉桩施工参考。     

基于熵权TOPSIS模型的海岛地区资源环境承载力研究——以舟山普陀区、定海区为例

随着海洋强国、"一带一路"、生态文明建设等国家战略的不断推进,海岛在国家政治、军事、经济、社会、生态中的地位不断提高,海岛开发、利用的规模越来越大,其生态保护也面临着新的挑战。本文依据资源环境承载力内涵,兼顾海岛资源环境特点,研究形成海岛地区资源环境承载力评价指标体系,综合应用熵权法、TOPSIS(逼近理想解排序方法)模型评价了典型海岛地区——普陀区与定海区2009-2015年间的资源环境承载力状况,结果表明:普陀和定海资源环境承载力水平呈稳步提升趋势,各个时期的环境保护政策和节能减排相关措施在环境保护与污染治理等方面起到了较为积极的作用。最后,在基于生态系统的海岛综合管理框架内提出了对策建议。     

Direct CPT and CPTu methods for determining bearing capacity of helical piles

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.     

闽江河口区湿地生态旅游环境容量研究

本文讨论了生态旅游环境容量的定义及内涵，分析了生态旅游环境容量的特征及构成，在此基础上估算了闽江河口区湿地生态旅游环境容量．结果表明：闽江河口区湿地生态旅游环境容量的限制因子是鳝鱼滩自然保护区生态旅游环境空间容量．鳝鱼滩旅游步行道可分成南路和北路，北路为水路游线，南路为陆路游线．北路游线环境空间日容量为800人次／d，南路游线环境空间日容量为1144人次／d．鳝鱼滩湿地生态旅游环境空间年容量为451202人次／a．这一环境容量可作为闽江河口区湿地生态旅游活动环境容量的最高限制量．     

湛江流沙湾马氏珠母贝的养殖容量

2008年3月—2009年1月调查分析流沙湾浮游动植物的生物量、叶绿素a含量、初级生产力、马氏珠母贝Pinctada martensii含壳重与鲜组织重的比值、养殖贝类和野生滤食性动物的滤水率、潮间带和潮下带底栖贝类及吊养区附着滤食性动物现存量等,应用营养动态模型和贝类养殖容量估算模型估算滤食性动物的总容量,扣除野生滤食性动物现存量,最终确定马氏珠母贝的养殖容量。结果显示,2种模型估算马氏珠母贝的养殖容量分别为19637.5t和20126.4t,平均养殖容量19881.95t。依据流沙湾马氏珠母贝的通常养殖密度(1.05×105个.hm-2)和平均商品规格(41g.个-1)计算,流沙湾马氏珠母贝的适养面积为461.83hm2。     

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

基于海洋资源环境承载力的海上油田环境保护管理研究

文章结合《资源环境承载能力监测预警技术方法(试行)》,通过分析海洋资源环境承载能力与海上油田环境保护管理的相关性,提出了海上油田全生命周期环境保护管理的新思路。同时结合海上油田的项目特点,探讨了现阶段海洋资源环境承载力监测预警技术在功能区划、管控要求和监测预警中可能存在的不协调、不一致和不断变化的问题,并提出了统一用海类型及其管控要求、差异化政策措施和动态分析的建议。     

西南岩溶地下水资源开发利用效应与潜力分析

西南岩溶地区面积78万km2,地下水系统包括裸露岩溶水系统和覆盖-埋藏型岩溶水系统两大类。由于降水丰富、地下岩溶发育,西南岩溶地下水资源丰富,在43万km2调查区内,具有地下水天然资源量1762.82×108m3/a,岩溶地下水允许开采资源量615.70×108m3/a。近年来,通过开展水文地质调查,在地下河、表层岩溶水和蓄水构造岩溶水打井开采方面均取得重要进展,产生了显著的经济和生态环境效应。但由于西南地区岩溶水开发难度大,区域经济落后,西南岩溶地下水的开发利用程度普遍较低,已开采量为98.32×108m3/a,仅占允许开采量的15.97%,剩余地下水潜力资源量517.38×108m3/a。