Early Mesozoic unroofing pattern of the Dabie Mountains (China): Constraints from the U-Pb detrital zircon geochronology and Si-in-white mica analysis of synorogenic sediments in the Jianghan Basin

This paper presents the results of an integrated U-Pb detrital zircon geochronology and Si-in-white mica analysis for synorogenic sediments in the Jianghan Basin to the south of the Dabie Orogen. The results provide an improved understanding of the provenance of these sediments and the unroofing pattern of the early Mesozoic Dabie Mountain. Si contents of detrital white micas range from 3.09 to 3.34 atoms pfu for the upper Triassic sandstones whereas 3.06 to 3.59 atoms pfu for the lower and middle Jurassic sandstones. The majority of detrital white micas in the lower Jurassic sandstones is phengitic and originated exclusively from the Dabie high- to ultrahigh- pressure rocks. The U-Pb dating results of the detrital zircons for seven samples suggest that these synorogenic sediments have a significant change of provenance from late Triassic to early and middle Jurassic. For the upper Triassic sandstone, the U-Pb age clusters of these zircons are characterized by ~ 420-450 Ma, ~ 750-820 Ma, ~ 1050-1200 Ma and ~ 2500 Ma with minor Luliangian (~ 1700–2000 Ma) components. In contrast, the zircon ages of the Jurassic sandstones are dominated by the Luliangian (~ 1700–2000 Ma) ages with only minor Caledonian (~ 420-450 Ma) and Greenville (~ 1050-1200 Ma) ages. In combination with other available geological data, it can be concluded that the Dabie HP-UHP rocks might initially be exposed to the surface at the beginning of early Jurassic (~ 190 Ma). The Jiangnan terrain (also named “Jiangnan old continental in Chinese) to the south of the Jianghan basin provided the predominant supply of upper Triassic sediments, whereas the Paleoproterozoic Yangtze crustal materials (overlying the present Dabie Complex at the time) were the important provenance of the Jurassic sediments in the Jianghan basin.     

Stratigraphic evolution of an outcropping continental slope system, Tres Pasos Formation at Cerro Divisadero, Chile

Depositional slope systems along continental margins contain a record of sediment transfer from shallow‐water to deep‐water environments and represent an important area for natural resource exploration. However, well‐preserved outcrops of large‐scale depositional slopes with seismic‐scale exposures and tectonically intact stratigraphy are uncommon. Outcrop characterization of smaller‐scale depositional slope systems (i.e. < 700 m of undecompacted shelf‐to‐basin relief) has led to increased understanding of stratigraphic packaging of prograding slopes. Detailed stacking patterns of facies and sedimentary body architecture for larger‐scale slope systems, however, remain understudied. The Cretaceous Tres Pasos Formation of the Magallanes Basin, southern Chile, presents a unique opportunity to evaluate the stratigraphic evolution of such a slope system from an outcrop perspective. Inherited tectonic relief from a precursor oceanic basin phase created shelf‐to‐basin bathymetry comparable with continental margin systems (～1000 m). Sedimentological and architectural data from the Tres Pasos Formation at Cerro Divisadero reveal a record of continental margin‐scale depositional slope progradation and aggradation. Slope progradation is manifested as a vertical pattern exhibiting increasing amounts of sediment bypass upwards, which is interpreted as reflecting increasing gradient conditions. The well‐exposed, seismic‐scale outcrop is characterized by four 20 to 70 m thick sandstone‐rich successions, separated by mudstone‐rich intervals of comparable thickness (40 to 90 m). Sedimentary body geometry, facies distribution, internal bedding architecture, sandstone richness and degree of amalgamation were analysed in detail across a continuous 2·5 km long transect parallel to depositional dip. Deposition in the lower section (Units 1 and 2) was dominated by poorly channellized to unconfined sand‐laden flows and accumulation of mud‐rich mass transport deposits, which is interpreted as representing a base of slope to lower slope setting. Evidence for channellization and indicators of bypass of coarse‐grained turbidity currents are more common in the upper part of the > 600 m thick succession (Units 3 and 4), which is interpreted as reflecting increased gradient conditions as the system accreted basinward.     

Late Pleistocene sea-level oscillations (MIS 10–2) recorded in shallow marine and coastal plain sediments of the southern Wanganui Basin, New Zealand

The northern Wanganui Basin, New Zealand, is one of the key global sites for understanding marine cyclic sedimentation during the Quaternary. This paper presents the first evidence of marine cyclic sedimentation from its central-southern parts. Sedimentological, micropalaeontological and palynological analyses on a 280-m-deep borehole encountered units dating back to MIS 10. The sequence includes four marine cycles spanning MIS 9–5, which are overlain by terrestrial fluvial aggradation surfaces dating from MIS 4–2. Each marine unit represents a progressively shallowing depositional environment from the mid-shelf to coastal plain. This is overlain by a terrestrial sequence of lowstand fluvial terraces. Localized fault movements appear to have influenced the sedimentary character of the sequence during MIS 7a and 5e producing basement highs which provided protection to the shoreline. The cyclothems described in this paper now extend the already extensive, previously described record from MIS 17–10 to produce a combined eustatic record of Quaternary sea level change within the basin to MIS 5. They also provide an excellent example of the sedimentary response of a coastal basin to a progressive loss of sedimentation accommodation space.     

Stratigraphy, depositional environments and level reconstruction of the last interglacial Lake Samra in the Dead Sea basin

In this paper we describe the stratigraphy and sediments deposited in Lake Samra that occupied the Dead Sea basin between ∼ 135 and 75 ka. This information is combined with U/Th dating of primary aragonites in order to estimate a relative lake-level curve that serves as a regional paleohydrological monitor. The lake stood at an elevation of ∼ 340 m below mean sea level (MSL) during most of the last interglacial. This level is relatively higher than the average Holocene Dead Sea (∼ 400 ± 30 m below MSL). At ∼ 120 and ∼ 85 ka, Lake Samra rose to ∼ 320 m below MSL while it dropped to levels lower than ∼ 380 m below MSL at ∼ 135 and ∼ 75 ka, reflecting arid conditions in the drainage area. Lowstands are correlated with warm intervals in the Northern Hemisphere, while minor lake rises are probably related to cold episodes during MIS 5b and MIS 5d. Similar climate relationships are documented for the last glacial highstand Lake Lisan and the lowstand Holocene Dead Sea. Yet, the dominance of detrital calcites and precipitation of travertines in the Dead Sea basin during the last interglacial interval suggest intense pluvial conditions and possible contribution of southern sources of wetness to the region.     

Structural controls on fractured coal reservoirs in the southern Appalachian Black Warrior foreland basin

Coal is a nearly impermeable rock type for which the production of fluids requires the presence of open fractures. Basin-wide controls on the fractured coal reservoirs of the Black Warrior foreland basin are demonstrated by the variability of maximum production rates from coalbed methane wells. Reservoir behavior depends on distance from the thrust front. Far from the thrust front, normal faults are barriers to fluid migration and compartmentalize the reservoirs. Close to the thrust front, rates are enhanced along some normal faults, and a new trend is developed. The two trends have the geometry of conjugate strike-slip faults with the same σ₁ direction as the Appalachian fold-thrust belt and are inferred to be the result of late pure-shear deformation of the foreland. Face cleat causes significant permeability anisotropy in some shallow coal seams but does not produce a map-scale production trend.     

Magnetic anomalies across Bastar craton and Pranhita-Godavari basin in south of central India

Aeromagnetic anomalies over Bastar craton and Pranhita-Godavari (P-G) basin in the south of central India could be attributed to NW-SE striking mafic intrusives in both the areas at variable depths. Such intrusions can be explained considering the collision of the Bastar and Dharwar cratons by the end of the Archaean and the development of tensile regimes that followed in the Paleoproterozoic, facilitating intrusions of mafic dykes into the continental crust. The P-G basin area, being a zone of crustal weakness along the contact of the Bastar and Dharwar cratons, also experienced extensional tectonics. The inferred remanent magnetization of these dykes dips upwards and it is such that the dykes are oriented towards the east of the magnetic north at the time of their formation compared to their present NW-SE strike. Assuming that there was no imprint of magnetization of a later date, it is concluded that the Indian plate was located in the southern hemisphere, either independently or as part of a supercontinent, for some span of time during Paleoproterozoic and was involved in complex path of movement and rotation subsequently. The paper presents a case study of the utility of aeromagnetic anomalies in qualitatively deducing the palaeopositions of the landmasses from the interpreted remanent magnetism of buried intrusive bodies.     

关于敦化盆地下白垩统的讨论

前人根据敦化盆地的地层的地层,认为该盆地下白垩统为河流—湖泊相碎屑岩。通过对新钻的敦参1井岩屑录井资料的分析、对16条二维地震资料的层位标定与追踪,以及对敦化盆地早白垩世盆地演化阶段的分析,得到了以下主要结论:1)敦化盆地下白垩统可能有两种分布形态,在盆地的主体部位,以浅变质岩形态存在,而在其他部位则以正常沉积岩形态零星存在;2)敦化盆地白垩系的分布规模不大,夹持于一个北北东向的狭窄长槽内;3)敦化盆地早白垩世处于裂谷盆地发展的初始张裂阶段;4)敦化盆地下白垩统不宜作为勘探目的层。     

大型凹陷向斜区油气倒灌式成藏——以松辽盆地三肇凹陷扶杨油层为例

三肇凹陷扶杨油层为典型大型凹陷向斜区油气倒灌式成藏,利用300条地震剖面、825口井曲线、11口井岩芯和探评井试油资料对扶杨油层断层特征及运动期次、油气下排深度、储层沉积特征等油气成藏主控因素综合研究表明：T2断层受控于基底断层、下部火山口、斜向拉张和伸展量差异四种因素具有平面密集成带、剖面“似花状”组合特征,且油气成藏期活动的油源断层多数为断层密集带边界断层;理论计算超压驱动油气下排深度和实际油底包络面统计扶杨油层含油厚度约为200m;重矿物分析扶杨油层主要受北部拜泉—青冈和西南保康物源影响,两物源在徐家围子地区交汇后向东流出;沉积微相揭示扶杨油层发育向上逐渐退积的河控浅水三角洲沉积体系,顶部为三角洲前缘亚相,中—下部为三角洲分流平原亚相,其中扶Ⅰ7—扶Ⅱ1小层为水退最大期,是油气富集主要层位。明水组末期青山口组源岩达到生油高峰,油气在超压作用下沿开启的断层密集带边界断层幕式下排后沿两侧上升盘河道砂体做短距离侧向运移,即断层密集带两侧地垒或断阶块为油气富集区,而断层密集带内多为地堑式组合,不利于油气聚集,在成藏模式指导下刻画出47个油气富集目标区,为松辽盆地北部扶杨油层下一步的勘探与开发指明了方向。     

Estimating economic losses of midrise reinforced concrete shear wall buildings in sedimentary basins by combining empirical and simulated seismic hazard characterizations

Studies of recorded ground motions and simulations have shown that deep sedimentary basins can greatly increase the intensity of earthquake ground motions within a period range of approximately 1–4 s, but the economic impacts of basin effects are uncertain. This paper estimates key economic indicators of seismic performance, expressed in terms of earthquake‐induced repair costs, using empirical and simulated seismic hazard characterizations that account for the effects of basins. The methodology used is general, but the estimates are made for a series of eight‐ to 24‐story residential reinforced concrete shear wall archetype buildings in Seattle, WA, whose design neglects basin effects. All buildings are designed to comply with code‐minimum requirements (i.e., reference archetypes), as well as a series of design enhancements, which include (a) increasing design forces, (b) decreasing drift limits, and (c) a combination of these strategies. As an additional reference point, a performance‐based design is also assessed. The performance of the archetype buildings is evaluated for the seismic hazard level in Seattle according to the 2018 National Seismic Hazard Model (2018 NSHM), which explicitly considers basin effects. Inclusion of basin effects results in an average threefold increase in annualized losses for all archetypes. Incorporating physics‐based ground motion simulations to represent the large‐magnitude Cascadia subduction interface earthquake contribution to the hazard results in a further increase of 22% relative to the 2018 NSHM. The most effective of the design strategies considered combines a 25% increase in strength with a reduction in drift limits to 1.5%.