气象卫星风矢量BUFR编码

为了与国际接轨且满足气象卫星风矢量产品国际交流需求的不断增长,开发了WMO新模板的风矢量产品BUFR编码软件。编码过程中通过附加字段提供了质量控制信息,描述符由早期风矢量产品BUFR编码的18个激增至254个,BUFR报文提供的信息更加丰富。编码结果表明非压缩编码BUFR报文的长度是压缩编码BUFR报文的9倍;为了便于GTS传输,宜采用压缩格式BUFR编码。压缩格式的BUFR编码有较高的数据压缩率（约53%）,非常利于数据传输。     

水体细菌碱性磷酸酶及其编码基因研究进展

水体溶解性反应磷是浮游植物可直接利用的主要磷营养形式,细菌碱性磷酸酶催化的有机磷矿化过程则是维持溶解性反应磷供给的重要途径.通过总结细菌碱性磷酸酶的种类与分布特征,发现主要包括Pho A、Pho X和Pho D 3种类型细菌碱性磷酸酶,其中超过50%的Pho X分布于细菌细胞的外部环境,对溶解性反应磷的循环再生尤为重要.综述水体产碱性磷酸酶细菌群落组成的研究进展,以及影响编码基因表达的环境因素,对比分析产碱性磷酸酶细菌群落鉴定方法的特点及发展趋势.细菌碱性磷酸酶编码基因的研究多关注寡营养海洋生态系统,对于同样存在磷限制问题的富营养化湖泊生态系统鲜有涉及,而构建针对典型富营养化湖泊生态系统的细菌宏基因组数据库,则可为建立淡水生态系统细菌碱性磷酸酶及其编码基因的研究方法奠定基础,有助于认识湖泊水华频发的微生物学驱动机制.     

基于平面波加速的VTI介质最小二乘逆时偏移

地震各向异性集中表现为速度各向异性,势必影响地震波运动学特征.传统声波逆时偏移(RTM)和最小二乘逆时偏移(LSRTM)没有考虑介质各向异性特征,导致反射波不能正确归位、同相轴出现扭曲及寻优速度慢或不收敛等,VTI介质逆时偏移(VTI-RTM)矫正了声波成像的不足,但仍存在低频干扰严重、中深部成像不佳、振幅保持差等缺陷.为此,本文首先实现了VTI介质最小二乘逆时偏移(VTI-LSRTM)方法,为了节省I/O及内存需求并提高效率,进一步引入平面波编码技术,提出了一种基于平面波加速的VTI介质最小二乘逆时偏移(VTI-PLSRTM)策略.在此基础上开展了简单模型及复杂Marmousi模型成像试验,并与标准逆时偏移剖面对比表明:本方法能够校正各向异性造成的相位畸变,且在迭代中自动压制串扰及低频噪声、补偿中深部能量,是一种兼具质量与效率的保幅成像策略;对速度误差的敏感性测试说明该方法需要相对正确的偏移速度及Thomsen参数模型.     

相位编码多次波逆时偏移成像

随着勘探地质体复杂度日益增大, 反射波成像面临诸多挑战, 作为有潜力提升成像精度的重要补充或替代手段的多次波成像愈发受到重视.然而, 串扰噪声的产生阻碍了多次波成像的实际应用.近年来, 作为压制串扰噪声的有效技术之一, 可控阶多次波成像取得了较大研究进展, 但因其需重复计算各阶多次波成像结果, 计算成本昂贵.为此, 本文引入随机相位编码技术, 并与多次波分阶思想结合, 提出相位编码多次波逆时偏移方法: 首先, 对各阶多次波进行随机相位编码(含随机时间延迟与极性反转); 其次, 叠加编码后的各阶多次波, 产生多次波超道集; 最后, 以编码后0至(N-1)阶多次波组成的超道集为虚拟震源进行正向延拓, 同时反传编码后1至N阶多次波所组成的超道集, 并进行互相关, 得到各阶多次波联合成像结果.本文所提方法能够同步使用各阶多次波, 实现各阶多次波联合成像, 避免各阶多次波单独进行成像, 从而成倍提升计算效率.本文用两套模拟数据与一套实际数据算例对所提方法进行了测试, 成像结果验证了该方法的可行性、有效性与应用前景.

     

新疆前兆震群ρ值的研究

研究新疆伊宁——乌鲁木齐和乌什——库尔勒1972年以来发生的49个震群的ρ值表明,ρ<0.55可作为前兆震群的判据指标。分析了ρ<0.55标准下的前兆震群的预测能力,认为,震群序列的ρ值具有一定的预报效能。     

Predicted interplanetary shocks/particles at Mars compared with in-situ observations: An overview

The biological and technological consequences of long-duration, solar-related, energetic particle radiation for manned/unmanned spacecraft warrant that consideration be given to providing reliable space weather predictions for future space missions to planet Mars. An account is, herein, provided of how the HAFv.2 numerical model was applied to predict the arrivals of four, flare-related, shocks at Mars generated during a >20-day active period on the Sun in March 1989, and of the arrival of another composite shock produced in association with a 10-day period of solar activity in December 2006. These predictions are compared with in-situ measurements of shock signatures at Mars recorded, in the former case, by the solar-low-energy-detector (SLED) and by the low-energy-telescope (LET) aboard the Phobos-2 spacecraft and, in the latter case, in data recorded by the ASPERA-3/IMA instrument aboard Mars Express. The success of the predictions is discussed and the requirement for further validation of the modeling technique using a large statistical sample pointed out. In-situ measurements made aboard Mars Express by the ASPERA-3/IMA experiment during the rising phase of Solar Cycle 24 can provide data relevant to such validation. The successful application of a SOLar Particle ENgineering COde (SOLPENCO), that estimates solar energetic particle (SEP) fluxes and fluences at the Earth, to the case of an energetic particle event at Mars (6 March 1989) is discussed. Measurements of SEP events recorded by the Solar TErrestrial RElations Observatory (STEREO) supplemented by Mars Express measurements can potentially allow the predictions of SOLPENCO to be further studied downstream using a large statistical sample. However, we are presently only at the beginning of our understanding of the complex Sun-Earth-Mars scenarios that give rise to shock/particle events in the close Martian environment.     

无单元法布点优化的一种新方法

研究了无单元法中单个影响域内的布点形式对误差的影响,提出了半径权值的概念。在经过充分的数值计算后,给出在半径权值对无单元法插值结果的精度的影响值的大小。研究对优化无单元法的节点布置、减小模拟误差有很大的作用,并且使得影响域的大小不再依靠点数的多少来确定,避免了影响域过大的情况和为了单个影响域内有足够多的插值点而使得整体插值点数目过多的弊端。运用单个区域内的插值点健康度的理论,研究了整个区域布点对无单元法模拟函数--滑动最小二乘法模拟精度的影响,并运用遗传算法对整个布点区域上的插值点进行了优化,给出了区域上的优化值。通过一个实例,得到一个具有普遍意义的插值点优化值与插值点密度的关系,并给出无单元法布点的一般性原则。     

公主岭市西部水源地地下水系统初步研究

本文以公主岭市西部水源地为例,以地下水系统的观点,对该区进行了全面的系统化、模型化和最优化,建立了地下水系统的预报模型和管理模型,推求了各系统的资源量及水位、水质分布规律,最后得出了该区地下水最佳开采量和取水工程方案。     

A simple test and predictive models for assessing swell potential of Ankara (Turkey) Clay

During the past three decades, damage due to swelling action of Ankara Clay has been observed more clearly in some parts of Ankara where rapid expansion of the city led to the construction of various kinds of structures. In this study, a comprehensive research program has been conducted (i) to investigate the effect of remoulding and desiccation on the swelling behavior of Ankara Clay and its swelling anisotropy, (ii) to estimate depth of active zone, (iii) to develop a simple technique in determining the magnitude of swelling based on water content of the soaked specimen after 24 and 72 h (w_max24,72), and (iv) to produce predictive models which could be used to estimate the swelling potential of Ankara Clay from its mineralogical and simply measured engineering characteristics. A laboratory testing program was carried out using both undisturbed, and remoulded and desiccated samples selected from 20 different locations. Montmorillonite was identified as being the main clay mineral present. Based on the moisture content variation with depth, the active expansive zone was considered to be about 2 m. The test results suggest that swelling pressure of the clay considerably decreases and/or dies out when the water content is greater than 30%. It is also noted that the measured lateral swelling is significantly in excess of the vertical equivalent indicating an anisotropy with respect to swelling. Statistical assessments indicate that a new parameter (w_max24,72) from a simple test, suggested in this study, is a very strong parameter for predicting swelling parameters of Ankara Clay. Based on 60 empirical predictive equations with coefficients of correlation between 0.96 and 0.66 from multiple regression analyses, w_max24,72, methylene blue value, liquid limit, dry unit weight and smectite content are the most important index and mineralogical properties to predict the swelling parameters of Ankara clay with small deviations from the measured values.     

一种DEM数据无损压缩的方法

数字高程模型（DEM）是网络3维地形可视化系统最重要的数据源之一。而且数据量巨大。数据压缩是缩短DEM在网络上的传输时间和节省存储空间的有效方法和途径。本文提出了用最小二乘预测模型和算术编码实现DEM最佳平均码长。并比较了几种预测方法,推导了最优线性二乘预测模型,优化了自适应算术编码的数据结构以加快编码的进程。最后对不同无损编码技术的压缩结果进行了分析,实验证明本文提出的压缩方案是可行的。