Geochemistry of recent hydrothermal systems of Mendeleev Volcano （Kuril Islands） and surrounding waters

On the Kuril Islands there are 85 volcanoes, 39 of which are active. Hot springs and mud pots are wide spread in this area and have significant inputs on the chemical composition of the surrounding surface waters and environment. We present results of trace elements as well as data on H, O, S, and He isotope ratios for hydrothermal systems of the Mendeleev Volcano （Kunashir Island） and surrounding surface waters. Water and gas samples were taken from springs and holes as well as creeks and the Lesnaya River. Among the thermal water types, three main groups can be distinguished. The first group includes the waters, in which SO4^- ion predominant. The water temperature on the surface reaches 97℃, and TDS varies from a few g/L to 7 g/L. These waters are acid to superacid with pH values ranging 0.6 to 2.3. The second group is sodium-chloride waters. A maximum TDS is 14.2 g/L. The waters are neutral or alkaline; pH varies from 6.9 to 8.2. The third group is the sodium-chloride-sulfate-bicarbonate water. The Stolbovskie springs, located in the periphery of the Mendeleev Volcano are representative of this type. The pH of these waters is close to neutral. TDS is 1.9 g/L. They are rather the derivatives of sodium-chloride waters arisen from dilution of them by subsurface waters. The Kuslyi Creek and Lesnaya River are located near the Mendeleev Volcano. The most acid springs discharge into the Kislyi Creek as a result pH of this creek being 2.5, and contents of most elements rather high. For example, the contents of dissolved solids of Si, Fe, Al, Mn, Zn, in waters of the Kislaya Creek are 22.1, 8.1, 6.2, 1.29, and 0.28 mg/L, and correspondently. The water of the Lesnaya River, （Before the Kislyi Creek, pH is about 8 with TDS 102 mg/L, but after the Kuslyi Creek, pH decreases and the concentrations of chemical elements increase. Debit of the Kislayi Creek in summer season is about 370 L/sec. It means that every day only this small creek inputs in the Lesnay River about 706 kg of Si;     

Factors controlling the spatial and temporal variability of dust emissions

New field measurement techniques are allowing researchers to better understand how surficial properties affect the temporal and spatial variability of dust emissions. In this paper we review the current understanding of the dust emission process and present new field measurements that examine how three surface properties： roughness, crust strength, and temporal changes of surface properties affect dust emissions. These data were collected using three unique measurement systems developed by our team. Roughness exerts considerable control on the entrainment threshold and emissions of dust from a surface. We have carried out a series of experiments designed to quantify roughness effects on aeolian sediment entrainment and transport in a shear stress partitioning framework. Our results show that the model of Raupach et al. （1993） provides very good agreement with available data to predict the amount of shearing stress on the intervening surface among roughness elements, relatively independent of their size and distribution. However, element size affects the aeolian sediment transport process beyond that attributable only to the reduction of surface shear stress caused by the roughness. Additional interactions of the elements with the saltation cloud appear to reduce the transport efficiency and potentially dust emissions as well. The effect of crust strength on dust emissions was assessed using a newly-developed pin penetrometer, which can measure crust strength in-situ. Previous researchers suggested that variation in crust strength even within a small area could lead to considerable spatial variability in dust emissions. Our measurements showed that crust strength is highly variable over a scale of centimeters. This variability may help to explain some of the observed scatter in field measurements of dust emissions for what appear to be homogeneous surfaces. Variability of dust emissions in time and space was also evaluated using a new instrument, the Portable In-Situ Wind Erosion Lab （PI-SWERL） developed to measure dust emissions from soil surfaces.     

Computer simulation studies of Crystallization under confinement conditions

Crystallization under confinement conditions is a very important process in geochemistry and geophysics. Computer simulations of fluids in nanometer scale pore spaces can provide a unique microscopic insight into the structure, dynamics and forces arising from the crystallization process. We discuss in this paper molecular dynamics computer simulations of crystallization in pores of nanometer dimensions. The crystallization pressure due to the freezing of a model of Argon in a nanopore is computed using molecular dynamics simulations. We also investigate the influence of pore geometry in determining the dynamics of confined fluids, as well as mass separation in binary mixtures. It turns out that the pore geometry reveals itself as an important variable, leading to 1) new mechanisms for fast diffusion in confined spaces, and 2) accumulation of solute in specific regions inside the pore.     

Genesis of monazite and Y zoning in garnet from the Black Hills, South Dakota

The paragenesis of monazite in metapelitic rocks from the contact aureole of the Harney Peak Granite, Black Hills, South Dakota, was investigated using zoning patterns of monazite and garnet, electron microprobe dating of monazite, bulk-rock compositions, and major phase mineral equilibria. The area is characterized by low-pressure and high-temperature metamorphism with metamorphic zones ranging from garnet to sillimanite zones. Garnet porphyroblasts containing euhedral Y annuli are observed from the garnet to sillimanite zones. Although major phase mineral equilibria predict resorption of garnet at the staurolite isograd and regrowth at the andalusite isograd, textural and mass balance analyses suggest that the formation of the Y annuli is not related to the resorption-and-regrowth of garnet having formed instead during garnet growth in the garnet zone. Monazite grains in Black Hills pelites were divided into two generations on the basis of zoning patterns of Y and U: monazite 1 with low-Y and -U and monazite 2 with high-Y and -U. Monazite 1 occurs in the garnet zone and persists into the sillimanite zone as cores shielded by monazite 2 which starts to form in the andalusite zone. Pelites containing garnet porphyroblasts with Y annuli and monazite 1 with patchy Th zoning are more calcic than those with garnet with no Y annuli and monazite with concentric Th zoning. Monazite 1 is attributed to breakdown of allanite in the garnet zone, additionally giving rise to the Y annuli observed in garnet. Monazite 2 grows in the andalusite zone, probably at the expense of garnet and monazite 1 in the andalusite and sillimanite zones. The ages of the two different generations of monazite are within the precision of chemical dating of electron microprobe. The electron microprobe ages of all monazites from the Black Hills show a single ca. 1713 Ma population, close to the intrusion age of the Harney Peak Granite (1715 Ma). This study demonstrates that Y zoning in garnet and monazite are critical to the interpretation of monazite petrogenesis and therefore monazite ages.     

Preservation/exhumation of ultrahigh-pressure subduction complexes

Ultrahigh-pressure (UHP) metamorphic terranes reflect subduction of continental crust to depths of 90–140 km in Phanerozoic contractional orogens. Rocks are intensely overprinted by lower pressure mineral assemblages; traces of relict UHP phases are preserved only under kinetically inhibiting circumstances. Most UHP complexes present in the upper crust are thin, imbricate sheets consisting chiefly of felsic units ± serpentinites; dense mafic and peridotitic rocks make up less than  10% of each exhumed subduction complex. Roundtrip prograde–retrograde P–T paths are completed in 10–20 Myr, and rates of ascent to mid-crustal levels approximate descent velocities. Late-stage domical uplifts typify many UHP complexes.

Sialic crust may be deeply subducted, reflecting profound underflow of an oceanic plate prior to collisional suturing. Exhumation involves decompression through the P–T stability fields of lower pressure metamorphic facies. Scattered UHP relics are retained in strong, refractory, watertight host minerals (e.g., zircon, pyroxene, garnet) typified by low rates of intracrystalline diffusion. Isolation of such inclusions from the recrystallizing rock matrix impedes back reaction. Thin-aspect ratio, ductile-deformed nappes are formed in the subduction zone; heat is conducted away from UHP complexes as they rise along the subduction channel. The low aggregate density of continental crust is much less than that of the mantle it displaces during underflow; its rapid ascent to mid-crustal levels is driven by buoyancy. Return to shallow levels does not require removal of the overlying mantle wedge. Late-stage underplating, structural contraction, tectonic aneurysms and/or plate shallowing convey mid-crustal UHP décollements surfaceward in domical uplifts where they are exposed by erosion. Unless these situations are mutually satisfied, UHP complexes are completely transformed to low-pressure assemblages, obliterating all evidence of profound subduction.     

Comparative Seismic Risk Studies for German Earthquake Regions on the Basis of the European Macroseismic Scale EMS-98

Within the framework of recent research projects, basic tools for GIS-based seismic risk assessment technologies were developed and applied to the building stock and regional particularities of German earthquake regions. Two study areas are investigated, being comparable by the level of seismic hazard and the hazard-consistent scenario events (related to mean return periods of 475, 2475 and 10000 years). Significant differences exist with respect to the number of inhabitants, the grade and extent of urbanisation, the quality and quantity of building inventory: the case study of Schmölln in Eastern Thuringia seems to be representative for the majority of smaller towns in Germany, the case study of Cologne (Köln) stands for larger cities. Due to the similarities of hazard and scenario intensities, the considerable differences do not only require proper decisions concerning the appropriate methods and acceptable efforts, they enable conclusions about future research strategies and needs for disaster reduction management. Not least important, results can sharpen the focus of public interest. Seismic risk maps are prepared for different scenario intensities recognising the scatter and uncertainties of site-dependent ground motion and also of the applied vulnerability functions. The paper illustrates the impact of model assumptions and the step-wise refinements of input variables like site conditions, building stock or vulnerability functions on the distribution of expected building damage within the study areas. Furthermore, and in contrast to common research strategies, results support the conclusion that in the case of stronger earthquakes the damage will be of higher concentration within smaller cities like Schmölln due to the site-amplification potential and/or the increased vulnerability of the building stock. The extent of damage will be pronounced by the large number of masonry buildings for which lower vulnerability classes have to be assigned. Due to the effect of deep sedimentary layers and the composition of building types, the urban centre of Cologne will be less affected by an earthquake of comparable intensity.     

River bank erosion control by soil nailing

A study has been done for analysing soil nailed cuts with circular type wedge failure by friction circle method. Various parameters such as nail length, nail diameter, nail inclination, wall inclination and angle of internal friction of soil have been considered to determine the factor of safety of nailed open cuts. The study shows that for cohesionless soil nailed cut, factor of safety increase with increase of parameters like angle of internal friction of soil, length of nail (L) versus height of cut (H) ratio, cohesion of soil and nail inclination (upto 15°) with horizontal. The study revealed that nails grouted with cement perform better than driven nails. A case study further confirms the analytical findings. Received 7 October     

Secular variations of the upper crust composition: Implication of geochemical data on the Upper Precambrian shales from the Southern Urals western flank and Uchur-Maya region

In the mid-1980s, it was concluded based on geochemical study that Th, Sc, La concentrations and ratios Th/Sc, La/Sc and Eu/Eu* did not wary significantly in the post-Archean time. It was impossible to judge about compositional variations of upper crust during the Riphean and Vendian, because data of that time characterized a limited number of samples from the post-Archean basins of Australia, New Zealand, and Antarctic. Considered in this work are variations of Eu/Eu*, LREE/HREE, Th/Sc, and La/Sc ratios in Upper Precambrian fine-grained siliciclastic rock of the Southern Urals western flank (Bashkirian meganticlinorium) and Uchur-Maya region (Uchur-Maya plate and Yudoma-Maya belt). As is established, only the Eu anomaly in the studied siliciclastic rocks is practically identical to this parameter of the average post-Archean shale. Three other parameters plot on the Riphean-Vendian variation curves with positive and negative excursions of diverse magnitude, which do not coincide always in time. It is assumed that these excursions likely mark stages of local geodynamic activity, destruction of pre-Riphean cratons, and progressing recycling of sedimentary material during the Riphean.