实验速度场测量技术及对流边界层特征研究

在对流槽中对对流边界层(CBL)温度场实验研究的基础上,进一步尝试通过实验技术测量速度场并分析研究CBL中的速度场特征。在应用PIV测量技术时选用铝粉作示踪粒子。实验证明了在混合层中速度分布明显具有对流边界层热泡特性;混合层顶部的速度分布很好地反应出夹卷层的结构特征;湍流速度特征量的垂直分布合理,与野外实测结果和类似的对流槽实验结果接近;误差分析表明示踪粒子的跟随性良好,粒子速度的测量结果能真实地反应流体的运动特征,从而得证了分析结果的可靠性。     

An experimental investigation into the influence of the damage openings on ship response

Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations.     

水平地震作用下无锚固储罐应力与应变响应分析

在考虑地基与储罐相互作用的情况下,采用有限元法对储罐在水平地震荷载作用下的应力及应变反应进行了数值计算。对3×104m3和2×103m3罐壁应力及应变的分析结果表明:环向、轴向应力及应变的分布形式呈现出明显的下部大上部小的特点,在偏底部的位置出现应力和应变的峰值;储液罐在水平地震作用下“象足”变形是由纵向压应力达到屈曲临界应力导致的屈曲破坏,不是强度破坏,即破坏属于失稳破坏而非强度破坏。     

水平地震激励下储罐液体晃动与提离分析

在考虑地基与储罐相互作用的情况下,采用有限元法对储罐在水平地震荷载作用下的液面晃动及储罐提离反应进行了分析。结果表明:罐内液体的晃动是长周期运动,其周期受地震动影响。无论是小体积罐还是大体积罐,在一定的地震烈度下均可以发生提离,而且储罐发生提离的时刻大多数是在地震动的峰值过后的一段时间内。大体积的储罐的提离明显小于小体积的罐。底板提离区域为月牙形。     

Sailboat propeller drag

All but the smallest classes of modern keelboats are fitted with inboard engines and consequently, when making way under sail, the craft experience parasitic drag due to trailing propellers and associated appendages. The variety of screw configurations used on sailing boats includes fixed-blade, feathering, and folding set-ups, with blades numbering two or three. Although the magnitude of the resultant drag is thought to have a significant influence on sailing performance, the published literature having regard to this problem is sparse. Here, the aim was to evaluate the drag effect of fixed-blade propellers of types commonly used on sailing craft. The results of towing tank tests on full-scale propellers are presented for the locked shaft condition; these are presented along with reconfigured data from the few previously published sources. For the case in which the propeller is allowed to rotate, tests were conducted on a typical screw with a range of braking torques being applied. It was hypothesised that the performance coefficients of the Wageningen B-Screw Series could be used to characterise adequately the types of screw of interest and that these could be extrapolated to enable prediction of the drag of a freewheeling propeller; an assessment of this formed part of the investigation.     

极限波浪运动特性的非线性数值模拟

利用时域高阶边界元方法建立了模拟极限波浪运动的完全非线性数值模型,其中自由水面满足完全非线性自由水面条件.采用半混合欧拉-拉格朗日方法追踪流体瞬时水面,运用四阶Runge-Kutta方法更新下一时间步的波面和速度势,同时应用镜像格林函数消除水槽两个侧面和底面上的积分.研究中利用波浪聚焦的方法产生极限波浪,并且在水槽中开展了物理模型实验,将测点试验数据与数值结果进行了对比,两者吻合得很好.对极限波浪运动的非线性和流域内速度分布进行了研究.     

A critical CAE analysis of the bottom shape of a multi stepped air cavity planing hull

One of the most important aspects, in the ACS and multi stepped hull design, is the choice of the geometrical shape of the cavity and the steps. In this article a complete experimental and numerical campaign on a multi stepped ACS has been carried out, varying the velocity and the air flow rate under the hull. The experimental tests have been conducted in an ITTC Towing Tank allowing to validate the numerical simulations obtained by means of a CFD U-RANSe (Unesteady Reynolds Averaged Navier-Stokes equations) code. The CFD setup is described in detail. From this campaign a critical analysis of the Froude number influence on the air cushion shape has been argued. The authors identified four different behaviours, from low to very high Froude numbers. The use of CFD has allowed to observe quantities of difficult evaluation by means of traditional experimental test, as e.g. the frictional component of the resistance, the airflow path lines and the volume of fraction in transversal and longitudinal sections. The results have been discussed.     

Wave tank and bench-top control testing of a wave energy converter

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.     

立式储罐与地基相互作用动力特性分析

立式储罐结构在工程实际中得到广泛的应用。本文以某大型立式储罐结构为例,考虑到液体、结构、地基的相互作用与影响,同时考虑地基与结构及液体与结构的耦合问题,采用有限元方法对浮放在地基上的储罐结构进行了自振特性计算。分别计算了满罐和空罐时系统的频率以及所对应的振型图,并研究了储罐的材料参数和地基刚度对动力特性的影响。结果表明:材料参数的影响较小,地基刚度的影响较大,对盛满液体与空罐的影响不同。     

圆形数值波浪水池斜向和多向入射波浪模拟研究

为了研究斜向入射波浪,基于三维不可压缩两相流模型,开发了一套圆形数值波浪水池数值模型。在圆形波浪水池中,通过源项造波法成功生成了任意入射方向的波浪,并且利用人工摩擦项模拟阻尼区以数值耗散反射波浪。模型基于嵌入式多块网格体系,采用FVM法(finite volume method)离散Navier-Stokes方程,VOF法(volume of fluid)追踪自由水面。试验结果表明,斜向入射波浪的模拟结果与理论值基本一致,圆形波浪水池在模拟斜向入射波浪时,有效区域的面积较传统波浪水池显著增大,而且有效区域受波浪入射角度的影响也较小。同时,通过叠加多列斜向入射波浪,模拟出了多向交叉波列,并通过与理论结果对比,发现其具有较高的精度。