南大西洋两岸盆地海相烃源岩特征与控制因素

南大西洋两岸盆地漂移期层系油气资源十分丰富,通过对两岸重点盆地漂移期主力烃源岩发育层位、生烃潜力、识别特征和分布范围对比分析,明确两岸发育早、晚两套主力海相烃源岩。其中,晚期的赛诺曼-土仑阶海相烃源岩分布范围较广。整体上,两岸北段和赤道段盆地漂移期主力烃源岩地化指标优于中段和南段盆地,西非一侧海域盆地烃源岩地化指标优于南美一侧盆地。在对重点钻井的矿物元素化验分析、沉积相和古地理分析基础之上,总结了局限海湾的古地理背景和沉积相带类型控制优质海相烃源岩发育程度和分布范围的规律,并进一步指出南大西洋两岸北段和赤道段盆地漂移期成熟生烃灶平面分布范围内的深水沉积砂体是主要有利勘探方向,以找油为主,中段含盐盆地内紧邻盐微盆的漂移期深水沉积砂体勘探潜力次之。     

三个台风对我国东部沿海风电的联合影响

基于CCMP(cross-calibrated multi-platform)再分析风场数据,研究了9907号, 9908号和9909号3个台风对中国沿海5个风电场的影响,分别从台风的形成以及路径,对沿海风电场风速的影响,台风期间的发电情况等详细地描述了台风对风电机组的影响。发现:台风对5个海上风电场的影响可以分为3个阶段,第一阶段是1999年8月1—4日,输出功率由南向北依次降低,此时主要受9907号台风的影响;第二阶段是8月6—9日,8月6日也呈现输出功率由南向北降低,主要是9909号台风由南海途径台湾海峡即将进入东海的影响;受9908号台风影响, 8月7日最大输出功率出现在S3风机。8月8日,受9908和9909号台风的叠加影响, S4风机的输出功率达到15天的最大值38.4 MW。第三个阶段是8月12—15日,受大气锋面的影响, S1—S5输出功率呈现波动。台风过境期间提高了各站点的运营能力和部分站点的额定容量,未对风电机组产生大的破坏。研究成果可为相关部门在台风期间海洋风力发电的决策提供参考。     

一种新型鲸鱼式潮流能发电装置的设计与试验研究

为了进一步提高潮流能的利用率,提出了一种新型鲸鱼式潮流能发电装置。借鉴风机叶片设计方法及水平轴水轮机的设计原理,利用结构力学、流体力学和CFD相关方法,对该装置的螺旋桨叶、导流筒和固定桩等部件进行了设计研究,从获能效果、装置可靠性和发电功率等方面进行了优化设计,并通过900 W样机试验验证了设计的有效性。试验结果显示,海流高潮期装置最大发电功率可达到980 W,一天内大约有4个缓潮期,此间发电功率明显下降,但持续时间不长,总体平均发电功率在800 W上下;同时潮流能轮机启动流速在0.41 m/s左右,有着良好的低速启动性能。     

海洋石油管线探测多波束剖面声纳设计

针对海洋石油管线探测多波束剖面声纳的高速、大容量的实时信号处理任务,以及声纳系统进一步扩展的需求,设计并实现了一种基于IP网络互连的、以并行DSP为处理节点的多波束剖面声纳系统.该系统应用于海底石油管线探测与定位,系统中的每个处理节点与数据采集转换部分采用TCP/IP网络连接,可以通过物理上添加一个或多个处理节点成倍的提高系统的信号处理能力,而在软件上无须大的改动.通过电联调与水槽试验,验证了系统的可行性和稳定性,该设计为高速水声阵列信号实时处理系统提供了一种全新的解决思路.     

Analysis of petroleum hydrocarbons in mangrove sediments of Red Sea of Yemen

A field work has been carried out to identify the occurrence of oil and oil products pollution in mangrove sediment from Red Sea of Yemen. The concentration of total petroleum hydrocarbons is from 700 ng/g at Kamaran Island station to 400 ng/g at Al-Hodiedah station, and the total organic carbon ( TOC) in samples ranges from 0.07% at Dhubab station to 0.03% at Kamaran Island station. This pollution is as a result of localized oil pollution and /or heavy ship traffic in the Red Sea and Gulf of Aden.     

The determination of potential difference by the joint application of measured and synthetical gravity data: a case study in Hungary

In an elementary approach every geometrical height difference between the staff points of a levelling line should have a corresponding average g value for the determination of potential difference in the Earth’s gravity field. In practice this condition requires as many gravity data as the number of staff points if linear variation of g is assumed between them. Because of the expensive fieldwork, the necessary data should be supplied from different sources. This study proposes an alternative solution, which is proved at a test bed located in the Mecsek Mountains, Southwest Hungary, where a detailed gravity survey, as dense as the staff point density (~1 point/34 m), is available along a 4.3-km-long levelling line. In the first part of the paper the effect of point density of gravity data on the accuracy of potential difference is investigated. The average g value is simply derived from two neighbouring g measurements along the levelling line, which are incrementally decimated in the consecutive turns of processing. The results show that the error of the potential difference between the endpoints of the line exceeds 0.1 mm in terms of length unit if the sampling distance is greater than 2 km. Thereafter, a suitable method for the densification of the decimated g measurements is provided. It is based on forward gravity modelling utilising a high-resolution digital terrain model, the normal gravity and the complete Bouguer anomalies. The test shows that the error is only in the order of 10⁻³mm even if the sampling distance of g measurements is 4 km. As a component of the error sources of levelling, the ambiguity of the levelled height difference which is the Euclidean distance between the inclined equipotential surfaces is also investigated. Although its effect accumulated along the test line is almost zero, it reaches 0.15 mm in a 1-km-long intermediate section of the line.     

钱塘江强潮河段江道缩窄治理研究

对钱塘江强潮河段江道缩窄治理进行研究。首先,回顾治理方案的比选,江道全线缩窄时河轴线线路和河道宽度的确定原则,以及不同河段的指数放宽率。然后,介绍了在涌潮汹涌、滩涂淤坍变化剧烈的强潮河段,实施筑堤所采取的工程措施的步序与要点。最后,分析论证了大规模江道缩窄治理后河床、潮汐、洪水位及涌潮高度等特征值的变化。可供进一步深入理论研究和工程施工参考运用。     

海底地形数据处理与DEM生成

分析了海底DEM生成经常会遇见的问题,介绍了坐标变换、接边处理、插值加密等数据预处理方法,最终生成海底规则格网DEM。     

BTEX anomalies used as indicators of submarine oil and gas reservoirs

It is a conventional method for petroleum prospecting to generally use paraffin hydrocarbon as basic indexes of oil and gas. This conventional geochemical technology, however, shows some limits in the prospecting as paraffin is vulnerable to influences from human and biologic activities. Consequently, BTEX (short for benzene, toluene, ethyl benzene and xylem, which are direct biomarkers) among aromatic hydrocarbon series has been taken into account for the oil and gas prediction. Domestic and foreign study results demonstrate that BTEX is hardly disturbed and can well indicate oil and gas reservoirs. Based on measured data from a South China Sea area, the present authors have used self-developed visual assessment software for petroleum prospecting has been used to process data, strip background anomalies, and outline significant BTEX anomalies. By comparison with stratigraphic profiles of the target area, it is confirmed that BTEX is a good indication of marine oil and gas during the petroleum prospecting.     

Velocity potential formulations of highly accurate Boussinesq-type models

The highly accurate Boussinesq-type equations of Madsen et al. (Madsen, P.A., Bingham, H.B., Schäffer, H.A., 2003. Boussinesq-type formulations for fully nonlinear and extremely dispersive water waves: Derivation and analysis. Proc. R. Soc. Lond. A 459, 1075–1104; Madsen, P.A., Fuhrman, D.R., Wang, B., 2006. A Boussinesq-type method for fully nonlinear waves interacting with a rapidly varying bathymetry. Coast. Eng. 53, 487–504); Jamois et al. (Jamois, E., Fuhrman, D.R., Bingham, H.B., Molin, B., 2006. Wave-structure interactions and nonlinear wave processes on the weather side of reflective structures. Coast. Eng. 53, 929–945) are re-derived in a more general framework which establishes the correct relationship between the model in a velocity formulation and a velocity potential formulation. Although most work with this model has used the velocity formulation, the potential formulation is of interest because it reduces the computational effort by approximately a factor of two and facilitates a coupling to other potential flow solvers. A new shoaling enhancement operator is introduced to derive new models (in both formulations) with a velocity profile which is always consistent with the kinematic bottom boundary condition. The true behaviour of the velocity potential formulation with respect to linear shoaling is given for the first time, correcting errors made by Jamois et al. (Jamois, E., Fuhrman, D.R., Bingham, H.B., Molin, B., 2006. Wave-structure interactions and nonlinear wave processes on the weather side of reflective structures. Coast. Eng. 53, 929–945). An exact infinite series solution for the potential is obtained via a Taylor expansion about an arbitrary vertical position z = zˆ. For practical implementation however, the solution is expanded based on a slow variation of zˆ and terms are retained to first-order. With shoaling enhancement, the new models obtain a comparable accuracy in linear shoaling to the original velocity formulation. General consistency relations are also derived which are convenient for verifying that the differential operators satisfy a potential flow and/or conserve mass up to the order of truncation of the model. The performance of the new formulation is validated using computations of linear and nonlinear shoaling problems. The behaviour on a rapidly varying bathymetry is also checked using linear wave reflection from a shelf and Bragg scattering from an undulating bottom. Although the new models perform equally well for Bragg scattering they fail earlier than the existing model for reflection/transmission problems in very deep water.