Bound and mobile soil water isotope ratios are affected by soil texture and mineralogy,whereas extraction method influences their measurement

Questions persist about interpreting isotope ratios of bound and mobile soil water pools, particularly relative to clay content and extraction conditions. Interactions between pools and resulting extracted water isotope composition are presumably related to soil texture, yet few studies have manipulated the bound pool to understand its influence on soil water processes. Using a series of drying and spiking experiments, we effectively labelled bound and mobile water pools in soils with varying clay content. Soils were first vacuum dried to remove residual water, which was then replaced with heavy isotope-enriched water prior to oven drying and spiking with heavy isotope-depleted water. Water was extracted via centrifugation or cryogenic vacuum distillation (at four temperatures) and analysed for oxygen and hydrogen isotope ratios via isotope ratio mass spectrometry. Water from centrifuged samples fell along a mixing line between the two added waters but was more enriched in heavy isotopes than the depleted label, demonstrating that despite oven drying, a residual pool remains and mixes with the mobile water. Soils with higher clay + silt content appeared to have a larger bound pool. Water from vacuum distillation samples have a significant temperature effect, with high temperature extractions yielding progressively more heavy isotope-enriched values, suggesting that Rayleigh fractionation occurred at low temperatures in the vacuum line. By distinctly labelling bound and mobile soil water pools, we detected interactions between the two that were dependent on soil texture. Although neither extraction method appeared to completely extract the combined bound and mobile (total water) pool, centrifugation and high temperature cryogenic vacuum distillations were comparable for both δ²H and δ¹⁸O of soil water isotope ratios.     

多角度倾斜摄影技术在自动纹理映射上的应用

利用多角度倾斜摄影技术获取的倾斜影像成果来更新和构建城市三维实景纹理映射成为数字城市建设中的一个重要应用。本文采用基于DLG和3Dmax生成的建筑物模型,结合SWDC-5的多角度倾斜影像,通过自动选择纹理、自动编辑纹理、自动纹理映射等一系列步骤,自动生成大区域建筑物三维实景数字城市。并通过实验数据对该计算方法的可靠性进行验证,结果表明:该系统的数字化程度远远高于传统方法。     

纹理特征向量与最大化熵法相结合的SAR影像非监督变化检测

合成孔径雷达(SAR)影像具有明显的斑点噪声,在变化检测中,一般需要考虑空间邻域信息。本文结合SAR影像丰富的纹理信息,提出一种考虑空间邻域信息的高分辨率SAR影像非监督变化检测方法,用基于灰度共生矩阵(GLCM)的32维纹理特征向量构造差异影像。通过最大化熵法自动选取阈值,对精度指标随窗口大小的变化进行回归分析,得到适合于变化检测的窗口为11×11。试验表明,本文方法优于马尔科夫随机场法,可以减小斑点噪声的影响,有效提高高分辨率SAR影像变化检测的精度。     

基于 Lidar 数据和倾斜摄影的城市三维模型构建

针对传统建模方式建模效率低、模型纹理不够丰富真实等缺点,阐述一种以机载Lidar技术来获取地面点高精度的三维坐标、用倾斜摄影测量为三维建模提供纹理的一种新兴的三维建模方式。实验表明,该建模方式不仅工作效率高、真实反应城市空间布局,而且定位精度高、具备可量测分析功能等,同时提供DOM,DEM,点云数据,倾斜影像等数据。     

结合多尺度纹理特征的遥感影像面向对象分类

地物具有多尺度的特点,单一尺度难以准确描述遥感影像包含的地物纹理信息。利用我国自行研发的高分一号遥感影像数据,采用灰度共生矩阵对第一主成分进行纹理特征提取,利用Jeffries-Matusit距离选择多尺度组合,并通过单一纹理结合多光谱数据的分类精度,以及纹理特征间的相关性,最终选择多尺度纹理特征组合进行面向对象分类。研究结果表明:结合多尺度纹理特征组合的面向对象GF-1影像分类能有效提取地物信息,总体分类精度达到81.75%,Kappa系数0.78。     

倾斜摄影测量的城市真三维模型构建方法

针对如何基于近年来新推出的倾斜摄影测量技术快速构建城市真三维模型的问题,在研究分析国内基于该技术构建三维模型方法的基础上,提出了利用Street Factory系统,结合少量人工干预快速构建城市真三维模型的方法。采用倾斜影像联合空中三角测量技术,实现了多角度倾斜影像的一体化区域网平差;通过多视影像密集匹配和自动纹理关联,实现了高精度真实三维模型的构建。基于RCD-30倾斜相机获取的西安大雁塔景区倾斜影像,开展城市真三维模型构建试验。结果表明,所提方法构建的城市真三维模型满足相关规范的要求,适合大规模区域城市三维模型快速构建,对测绘生产单位规模化生产具有一定的参考价值。     

Deciphering As and Cu cycling in sediment pore waters in a large marina (Port Camargue,southern France) using a multi-tracer (Fe,Mn, U,Mo) approach

The sediments of the Port Camargue marina (South of France) are highly polluted by Cu and As (Briant et al., 2013). The dynamics of these pollutants in pore waters was investigated using redox tracers (sulfides, Fe, Mn, U, Mo) to better constrain the redox conditions.In summer, pore water profiles showed a steep redox gradient in the top 24 cm with the reduction of Fe and Mn oxy-hydroxides at the sediment water interface (SWI) and of sulfate immediately below. Below a depth of 24 cm, the Fe, Mn, Mo and U profiles in pore waters reflected Fe and Mn reducing conditions and, unlike in the overlying levels, sulfidic conditions were not observed. This unusual redox zonation was attributed to the occurrence of two distinct sediment layers: an upper layer comprising muddy organic-rich sediments underlain by a layer of relatively sandy and organic-poor sediments. The sandy sediments were in place before the building of the marina, whereas the muddy layer was deposited later. In the muddy layer, large quantities of Fe and Mo were removed in summer linked to the formation of insoluble sulfide phases. Mn, which can adsorb on Fe-sulfides or precipitate with carbonates, was also removed from pore waters. Uranium was removed probably through reduction and adsorption onto particles. In winter, in the absence of detectable pore water sulfides, removal of Mo was moderate compared to summer.Cu was released into solution at the sediment water interface but was efficiently trapped by the muddy layer, probably by precipitation with sulfides. Due to efficient trapping, today the Cu sediment profile reflects the increase in its use as a biocide in antifouling paints over the last 40 years.In the sandy layer, Fe, Mn, Mo and As were released into solution and diffused toward the top of the profile. They precipitated at the boundary between the muddy and sandy layers. This precipitation accounts for the high (75 μg g⁻¹) As concentrations measured in the sediments at a depth of 24 cm.     

Recognition features of felsic pyroclastics of Serra do Tombo formation,Minas Gerais,Brazil

In this contribution we report a study of poorly exposed, rhyodacitic welded-ignimbrite deposit from Minas Gerais. A petrographic study of textures indicate high temperature of emplacement. Key features include eutaxitic texture, flattened and agglutinated lapilli and glass menisci. Most of the feldspar minerals and glass are extensively altered to clay minerals, which pseudomorph the original volcanic textures. Glass menisci and spherules suggest a possible process of liquid immiscibility. Immobile trace element distribution indicates a possible link with other post-Palaeozoic felsic volcanic rocks in Brazil, a magmatism interpreted as due to basaltic underplating and partial melting of a hydrous continental crust. A peculiar feature is a high Light REE/Heavy REE ratio. Depletion in heavy rare earth elements is possibly due to a residual HREE-bearing phase in the source. The geologic context of these rocks suggests a Lower Cretaceous age and a tectonic relationship with a continental rifting event.     

郯庐断裂带张八岭隆起段晚中生代岩浆岩继承锆石U-Pb年代学:源区属性及构造意义

大别与苏鲁造山带之间的郯庐断裂带张八岭隆起段,构成了华北与扬子板块之间的断裂边界。该边界带的深部结构状态长期以来存在着不同的认识。本文利用张八岭隆起带沿线出露的晚中生代岩浆岩中继承锆石U-Pb年代学信息,结合地球物理资料及Nd、Pb、Hf同位素资料,分析了其深部的岩浆源区属性及结构状态。张八岭隆起带北段晚中生代岩浆岩继承锆石年龄以1.9~2.7Ga为主,最大峰值年龄为2.5Ga;南段继承锆石年龄以2.2~2.6Ga为主,峰值年龄也为2.5Ga;郯庐断裂带庐江段则以含大量新元古代锆石为特征,在0.7Ga形成显著的分布峰值,并有早元古和少量太古代年龄信息。分析结果表明,张八岭隆起带北段的晚中生代岩浆岩源区为华北下地壳,南段的源区兼有华北和扬子陆壳的信息,而更南部庐江段则以扬子地壳源区为特征。电法剖面揭示,郯庐断裂主边界在张八岭隆起带下向南东倾斜,从而深部存在华北地壳;而南部庐江段转变为向北西陡倾,从而深部皆为扬子地壳。郯庐断裂深部产状特征支持其印支期应为斜向汇聚边界。而其中三叠纪继承锆石的缺失指示隆起带上变质岩应为原地岩石,而非来自大别造山带。     

西藏冈底斯尼木后碰撞花岗岩的岩浆混合作用:显微结构证据

岩浆混合过程中不同熔体之间的相互作用会影响晶体的成核与生长,形成矿物内部复杂的成分变化,以及矿物之间的不平衡结构。尼木二长花岗岩位于冈底斯岩浆岩带中部,是代表性的形成于后碰撞构造演化时期的花岗岩体。本文对其中的斜长石与角闪石颗粒进行了详细的结构和成分分析,揭示了斜长石中的港湾状、浑圆状、筛孔状熔蚀结构以及斜长石成分的突然变化和角闪石包裹黑云母的不平衡结构,并探讨了它们的成因以及相关的岩浆混合作用。分析结果显示,斜长石中突变环带的An含量为37.6~40.6,熔蚀环带的An含量为48.2~59.5,均高于两侧斜长石的An含量(18.4~26.4),表明在形成这些结构时有外来基性岩浆的混合使得岩浆成分发生了突变。样品中的部分黑云母被自形的角闪石包裹,黑云母呈浑圆状并且具有港湾状的熔蚀边,这可能是基性岩浆的混合作用使得岩浆的温度升高导致黑云母发生部分熔融,混合后的岩浆在黑云母周围继续结晶形成角闪石。这些显微结构为揭示冈底斯岩浆岩带的岩浆混合作用提供了新证据。