Production of gaseous pore pressure during rock slides

SummaryProduction of Gaseous Pore Pressure During Rock Slides When a rock mass slips, the local heating of the slip surface transforms pore water into vapour if the surface of failure is deep enough. It is possible to calculate, as a first approximation, a critical displacement of the mass necessary to create vapour in the slide zone. A second approximation gives the relation between critical displacement and rate of shear displacement as the slide mass creeps towards catastrophe.

---

ZusammenfassungBildung eines gasförmigen Porendrucks während Gleitungen im Fels Bei Einstürzen einer Gesteinsmasse kann das Porenwasser durch die lokale Wärmeabfuhr an der Rutschfläche in Dampf umgewandelt werden, falls die Bruchfläche tief genug ist.In einer ersten Annäherung kann die kritische Verschiebung der Masse errechnet werden. In einer zweiten Annäherung kann eine Beziehung zwischen der kritischen Verschiebung und der Verschiebungsgeschwindigkeit hergestellt werden.

---

RésuméFormation d'une pression interstitielle de gas lors d'un glissement d'une masse rocheuse Quand un massif rocheux s'écroule, la dissipation de chaleur localisée dans la surface de glissement peut transformer l'eau interstitielle en vapeur si la surface de rupture est suffisamment profonde. Dans une première approximation on peut calculer un déplacement critique du massif. Dans une deuxième approximation on peut obtenir une relation entre le déplacement critique et la vitesse de déplacement.

     

西秦岭三叠纪酸性侵入岩中高An值斜长石的成因及其地质意义

研究I型花岗岩中再循环晶的成分和结构特征，对揭示岩浆系统的形成和演化历史以及壳源和幔源岩浆的相互作用具有重要的意义。本文以西秦岭北西段三叠纪过马营复式岩体内的不同造岩矿物为主要研究对象，通过对具有不同结构特征的斜长石"粗晶"和黑云母展开电子探针（EMPA）、LA-ICP-MS微量元素面扫描、原位Sr同位素分析，来探讨含高An斜长石的成因，示踪不同岩浆房端员的属性，约束岩浆演化过程并建立多级岩浆房模型。过马营复式岩体的岩性分为偏铝质花岗岩类和过铝质花岗闪长岩类，两类岩性中均存在An值呈突变的筛状结构斜长石，即高An（72~85）区与低An（20~55）区在同一颗粒中并存，其对应主、微量元素也存在截然变化。与低An区相比，高An区具有高Fe、Mg，高Ba的特征。高钙区斜长石可进一步分为两类，第1类高钙区斜长石（An₈₀-₈₅），和第2类高钙区斜长石（An₇₂-₇₈）。第1类高钙区比第2类高钙斜长石区具有更高的Ca、Al、Fe、Mg、Ba含量。本研究中斜长石晶体存在核_高An-边_低An与核_低An-幔_高An-边_低An两种不同类型的环带结构，表明其各自的生长过程有所不同。高An区与低An区之间An值跳跃式的变化与对应主、微量元素Fe、Mg、Sr、Ba含量特征均指示斜长石成分差异并非晶内扩散、动力学作用以及物理条件的变化造成的，更可能形成于开放的岩浆系统。本文认为斜长石粗晶为再循环晶，其内部的高An区形成于深部富H₂O玄武质岩浆，低An区形成于浅部酸性岩浆房（偏铝质与过铝质）。两种不同高钙区斜长石及其对应的主、微量元素差异指示它们很可能结晶于两批次不同的玄武质岩浆，其中第1类高钙区斜长石的母岩浆相对更富Fe、Mg、Ba。两种玄武质岩浆携带高An斜长石沿岩浆通道向上运移，上升过程熔蚀先前结晶的高An斜长石，将其带入浅部酸性岩浆房后与内部花岗质/花岗闪长质岩浆发生混合。混合之后的岩浆沿高An斜长石残晶边部继续结晶生长，同时高温玄武质岩浆的注入导致浅部岩浆房已结晶的低An斜长石被熔蚀形成筛状结构，随后玄武质岩浆、混合后岩浆依次沿其边部继续生长。我们认为两批次的玄武质岩浆体积较小并未对浅部酸性岩浆房成分造成大的影响。     

Response of hydrothermal activity in different types of soil at ground surface to rainfall in permafrost region

In order to understand the hydrothermal activity mechanism of active layers to rainfall in permafrost regions caused by humidification of climate, the differences of ground surface energy balance and hydrothermal activity in different types of shallow soil with the consideration of rainfall were discussed. Based on the meteorological data in 2013 observed at Beiluhe observation station of Tibet Plateau, three types of shallow ground soil (i.e., sandy soil, sandy loam and silty clay) were selected to compare the differences in the water content and energy balance at the ground surface, dynamic processes of water and energy transport in active layers and coupling mechanism under rainfall condition in the plateau using a coupled water-vapor-heat transport model. The results show that the increase of soil particle size leads to the increase of surface net radiation and latent heat of evaporation, but the decrease of soil heat flux. The difference of surface energy balance, especially the sensible heat flux and latent heat of evaporation, are larger in the warm season but smaller in the cold season. The liquid water transport under hydraulic gradient and the water-vapor transport under thermal gradient are obvious as the particle size in soil increases. However, the water-vapor flux under thermal gradient increases but the liquid water flux under hydraulic potential gradient decreases. As a result, the water content in shallow soil decreases accordingly but it increases slightly at the depth of 25 ~75 cm. Moreover, with the increase of soil particle size, the thermal conductivity of soil, convective heat transfer under rainfall and surface evaporation increase, but the soil heat conduction flux and soil temperature gradient decrease. Thus, soil temperature in sandy soil is much higher than that of sandy loam and silty clay at the same depth. The permafrost table declines with the increase of the thickness of active layer, which is unfavourable to permafrost stability. The results can provide theoretical reference for stability prediction and protection of permafrost caused by humidification of climate.     

Assessment of groundwater residence times in the pore aquifers of the River Elbe Basin

An area covering assessment of the groundwater residence times for the upper pore aquifers in the River Elbe Basin was performed. Residence times were determined by combining groundwater velocities and flow distances along each flow-path to the surface waters using a two-dimensional model approach. Groundwater velocity was calculated as a function of hydraulic conductivity, hydraulic gradient and effective yield of pore space. Flow paths were obtained by an analysis of the morphology of the groundwater table. The mean groundwater residence time in the pore aquifers of the River Elbe Basin was quantified to about 25 years. A strong temporal blurring in the different regions between less than one year and more than 250 years was obtained. For the regional groundwater management in the Elbe Basin the groundwater residence times are an important parameter, which helps to take into account the temporal dimension in the assessment of the impact of political measures aiming at the improvement of groundwater quality with regard to diffuse pollutants (e.g. nitrate).     

Rapid texture mapping from image sequences for building geometry model

An effective approach,mapping the texture for building model based on the digital photogrammetric theory, is proposed. The easily-ac-quired image sequences from digital video camera on helicopter are used as texture resource, and the correspon-dence between the space edge in build-ing geometry model and its line feature in image sequences is determined semi-automatically. The experimental re-sults in production of three-dimension-al data for car navigation show us an attractive future both in efficiency and effect.     

3D Building Modelling with Digital Map, Lidar Data and Video Image Sequences

Three-dimensional (3D) reconstruction and texture mapping of buildings or other man-made objects are key aspects for 3D city landscapes. An effective coarse-to-fine approach for 3D building model generation and texture mapping based on digital photogrammetric techniques is proposed. Three video image sequences, two oblique views of building walls and one vertical view of building roofs, acquired by a digital video camera mounted on a helicopter, are used as input images. Lidar data and a coarse two-dimensional (2D) digital vector map used for car navigation are also used as information sources. Automatic aerial triangulation (AAT) suitable for a high overlap image sequence is used to give initial values of camera parameters of each image. To obtain accurate image lines, the correspondence between outlines of the building and their line features in the image sequences is determined with a coarse-to-fine strategy. A hybrid point/line bundle adjustment is used to ensure the stability and accuracy of reconstruction. Reconstructed buildings with fine textures superimposed on a digital elevation model (DEM) and ortho-image are realistically visualised. Experimental results show that the proposed approach of 3D city model generation has a promising future in many applications.     

A study of the chemistry of pore fluids and authigenic carbonates in methane seep environments: Kodiak Trench, Hydrate Ridge, Monterey Bay, and Eel River Basin

Analyses of the chemical and isotopic composition of carbonates rocks recovered from methane seepage areas of the Kodiak Trench, Hydrate Ridge, Monterey Bay Clam Flats, and the Eel River Basin, coupled with the studies of the chemistry of the pore fluids, have shown that these carbonates have grown within the sediment column. Geochemical profiles of pore fluids show that, in deep water seeps (Kodiak Trench—4450 m; Monterey Bay—1000 m; Hydrate Ridge—650 m), δ¹³C (DIC) values are low (isotopically light), whereas in the Eel River area ( 350–500 m), δ¹³C (DIC) values are much higher (isotopically heavier). In all cases, the δ¹³C values indicate that processes of methane oxidation, associated with sulfate reduction, are dominant in the shallow sediments. Data on the isotopic composition of authigenic carbonates found at sites in Kodiak Trench, Eel River Basin South, and Eel River Basin North indicate a variable composition and origin in different geochemical environments. Some of the authigenic carbonates from the study sites show a trend in their δ¹³C values similar to those of the pore fluids obtained in their vicinity, suggesting formation at relatively shallow depths, but others indicate formation at greater sediment depths. The latter usually consist of high magnesium calcite or dolomite, which, from their high values of δ¹³C (up to 23‰;) and δ¹⁸O (up to 7.5‰), suggest formation in the deeper horizons of the sediments, in the zone of methanogenesis. These observations are in agreement with observations by other workers at Hydrate Ridge, in Monterey Bay, and in the Eel River Basin.     

Quick clay—A case study of chemical perspective in Southwest Sweden

Quick clay, a soil that changes from normal firm ground to a liquid mass when it is disturbed, has been involved in most of the large and serious clay slides in Sweden, Norway and Canada. The location, time of occurrence and size of quick clay slides are difficult to predict and large slides may cause great devastation. Some geochemical studies of Swedish quick clay were done in the 1960s and early 1970s, but no systematic studies of the interrelationships of pore water chemistry, mineralogy, geotechnical properties and other parameters on quick clays in Sweden have been published. Such studies are of national and general interest because of the many combinations of rock flour source areas and sedimentation conditions that occurred across central Sweden and into the Baltic Sea area during deglaciation. In this study, geotechnical properties related to the in situ chemistry at one quick clay site were extensively studied, and spot sampling was conducted at two other locations in Southwest Sweden. In this area the clay minerals mainly are non-expanding phyllosilicate minerals (illite) and primary minerals (quartz, feldspar), which is consistent with previous studies of quick clay mineralogy. Extensive leaching has occurred at all three locations. At the extensively studied site, Surte, the lowest salinity was found at the greatest depth, inferring that the leaching by fresh water was accomplished by water movement upward and laterally through the sediment from the underlying bedrock. This is consistent with the local setting where bedrock hills rise sharply to over 100 m above the marine sediment surface. An artesian pressure would also be anticipated at this location. There is a correlation (negative) between sensitivity and salinity but there is an indication that the maximum salinity or electrical conductivity consistent with the quick clay behaviour is higher than reported elsewhere. However, for high sensitivities the salinity is about the same as reported elsewhere. In the deepest part of the borehole, there is a higher content of Fe and Al in the pore water, indicating reduced state. Further work is needed to confirm the difference in salinity and to investigate the possible interplay of salinity and potential dispersing agents such as the role of anoxic conditions, in this region. Further work is especially needed in the locations where the sediment accumulation occurred under lower salinity conditions. At all three locations, high remoulded shear strength and low sensitivity have been seen near the surface together with a decrease in pore water cation concentrations.     

河南前河金矿岩石矿物特征

前河金矿属构造蚀变岩型。容矿岩石为正长斑岩，矿体大小不等，控矿破碎带内的岩石曾经受到早期塑性变形和晚期脆性变形两个阶段。容矿岩石及矿体围岩曾受多次热液蚀变作用，可分为三个成矿期：岩浆热液期、表生期和沉积期。岩浆热液期为最主要的成矿期，由四个矿化阶段组成。一种富铁黄铜矿在金矿石中广泛存在，可作为金矿石的指示矿物。