纹理主方向的遥感影像居民地提取

本文研究利用基于傅立叶变换和Hough变换的灰度共生矩阵方法对遥感影像居民地进行提取。首先,通过傅立叶变换把遥感影像变换到频率域,然后利用Hough变换找出遥感影像的主纹理方向,进而把影像主纹理方向旋转至水平,最后利用灰度共生矩阵方法进行纹理分割。实验结果表明:基于傅立叶变换和Hough变换的灰度共生矩阵方法对遥感影像居民地有较好的提取结果。     

Accuracy improvement of ASTER stereo satellite generated DEM using texture filter

The grid DEM(digital elevation model) generation can be from any of a number of sources:for instance,analogue to digital conversion of contour maps followed by application of the TIN model,or direct elevation point modelling via digital photogrammetry applied to airborne images or satellite images.Currently,apart from the deployment of point-clouds from LiDAR data acquisition,the generally favoured approach refers to applications of digital photogrammetry.One of the most important steps in such deployment i...     

基于最大球算法定量表征土体空间孔隙网络

孔隙网络控制着土体渗流、排水固结与基质吸力等重要工程性质。本文介绍了多孔介质孔隙网络最大球建模基本原理与算法。以显微CT扫描振捣干法生成的南京粉砂试样为例,采用最大球算法建立了试样三维重构模型表征单元体(REV)的空间孔隙网络球棍模型,计算得到了样品REV尺度的孔隙网络参数,统计发现,孔隙半径、喉道半径、孔隙配位数、孔隙截面形状因子、喉道截面形状因子与喉道长度等孔隙参数均近似服从正态分布,孔隙体积近似服从衰减型指数分布。孔隙与喉道半径分别分布在100μm与65μm以内,两者数学期望分别为40. 0μm与18. 0μm;配位数分布在25以内,数学期望为5. 1;孔隙与喉道截面形状因子分别分布在0. 01~0. 04与0. 01~0. 05的区间内,两者数学期望分别为0. 019与0. 033;喉道长度分布在100~800μm以内,数学期望为292. 22μm。同时发现,样品中体积小于1. 5×10^7μm^3的小孔隙数量超过90%。本方法可应用于土体细观孔隙结构的定量表征。     

西昌盆地上三叠统白果湾组富有机质泥页岩沉积岩相古地理与孔隙特征

海陆过渡相富有机质泥页岩是页岩气勘查开发的重要领域。本文以西昌盆地上三叠统白果湾组富有机质泥页岩为研究对象,对研究区内富有机质泥页岩的沉积岩相古地理特征、微观孔隙类型、孔隙结构特征进行研究。白果湾组富有机质泥页岩段沉积相主要为湖泊相、三角洲相、河流相。发育不同类型的微孔隙,孔隙主要以小孔为主,微孔次之,平均孔径分布在5.56~56.89nm之间,比表面积平均为9.44m²/g,总孔体积平均为0.0187cm³/g。页岩气主要形成于滨浅湖亚相及半深湖亚相中,并主要吸附于富有机质泥页岩的小孔、微孔内;西昌盆地白果湾组富有机质泥页岩储集空间较好,具有良好的勘探潜力。     

Erosion probability model of base-soil particle migration into a granular filter under local flow

To avoid soil erosion, lters often are installed in the downstream cross section of dams. However, the probability of piping failure and the lter effect both are related to the soil pore network. Previous erosion probability models for a base soil- lter system do not consider the effect of local ow. Therefore, in this study, an improved erosion probability model is established, in which the deviation between the main ow direction of the soil and the local ow direction in the lter was considered based on a previous model. The improved model was validated by numerical simulation. The erosion probability was found to affect the reasonable evaluation of lter effects and the optimal selection of lter thickness. The controlling con- striction size in a granular lter was increased to Dc* Dc5 with a lter thickness of 59 Dm.     

Bed material texture in low order streams on the Queen Charlotte Islands,British Columbia

Low order channels comprise a large proportion of the links of every drainage basin, and are often at the centre of land management concerns. They exhibit hydrological and geomorphological characteristics atypical of higher order links. This paper examines the nature and causes of variations in the bed material texture of two streams on the Queen Charlotte Islands, British Columbia. The extant, functional exponential model is found to be inadequate for explaining observed changes in grain size parameters with distance downstream. Recurrent disruption of sediment transport by large organic debris jams, and the sporadic contamination of the fluvial sediment population by colluvial inputs, preclude the development of longitudinal structure. Rather, grain size varies erratically over short distances. A stochastic model best describes the observed variations, and should be adopted as an alternative to the exponential model in low order links. Characteristic variances are controlled by the degree of hillslope-channel coupling, and the extent and characteristics of non-alluvial storage mechanisms.     

Coalbed methane reservoirs’ pore-structure characterization of different macrolithotypes in the southern Junggar Basin of Northwest China

Coalbed methane (CBM) development in the southern Junggar Basin of Northwest China has aroused extensive attention owing to its significant resource potential. The accurate characterization of coal pore structure is important for CBM exploration and production. In order to explore the relationship between coal pore structure and macrolithotype, which has rarely been studied in the southern Junggar Basin, a series of laboratory experiments were performed on eight samples of different macrolithotypes. The results show that the porosity exhibits regularity with macrolithotype in the order bright < semibright < semidull < dull, and also shows an increase with the rise of the inertinite content. The pore-size distribution results show that the dominating pores of bright and semibright coals are usually greater than that of dull and semidull coals in size. The pore-type analysis indicates that the bottleneck pores (Type B) are well developed in dull and semidull coals, while bright and semibright coals mainly host two sides (Type A), namely opened pores and one-side-closed pores (Type C). The pore-type and -size distribution strongly affect pore connectivity refers to the facts that: 1) the proportion of effective porosity increases with an increasing proportion of pores greater than 100 nm in size; and 2) that the mercury withdrawal efficiency is always lower when the pores are mostly of Type B. So the pore connectivity of semibright and bright coals is higher than that of semidull and dull coals. Furthermore, pores are developed mainly in the inertinite, with pore-type being dominated by Type B and C, secondly in the vitrinite, with pore-type being dominated by Type A and C, and less developed in the liptinite with pore-type of B and C. The pore connectivity of each maceral is in the order vitrinite > inertinite > liptinite. Finally, according to the research results, the reservoir fracturing improvement should be more arranged on the dull or semi-dull coals, and the producing layers should be bright or semi-bright coals as much as possible on the premise that the gas contents of coal layers are not much different from each other.     

不同围压和流体饱和状态下致密砂岩弹性各向异性特征

为研究致密砂岩声波速度及其各向异性随围压的变化规律以及不同流体饱和状态下的弹性各向异性特征,钻取了不同方向的岩心并在实验室超声波频率下对致密砂岩的声学特性进行了测量,分别给出干燥和饱和水状态下,不同方向样品纵横波速度、刚性系数以及各向异性系数随围压的变化规律,并对实验结果进行了分析讨论.实验结果表明致密砂岩纵横波速度、纵横波速度比以及刚性系数均随围压增加而增加,但其在不同饱和状态下的变化率却截然不同;纵横波速度比、各向异性系数在饱和水状态下变化规律不明显,表明孔隙流体的存在对于岩石物理性质有着非常重要的影响.这方面的实验工作不但对于考察不同流体性质对致密岩石弹性各向异性影响是必要的,而且有助于致密砂岩油水和气层的识别.     

Learning of pore pressure response and dynamic soil behavior from downhole array measurements

Downhole arrays are deployed to measure motions at the ground surface and within the soil profile, with some arrays instrumented to also record the pore pressure response within soft soil profiles during excitation. The measurements from these arrays have typically been used in conjunction with parametric and nonparametric inverse analysis approaches to identify soil constitutive model parameters for use in site response analysis or to identify averaged soil behavior between locations of measurement. The self-learning simulations (SelfSim) inverse analysis framework, previously developed and applied under total stress conditions, is extended to effective stress considerations and is employed to reproduce the measured motions and pore pressures from downhole arrays while extracting the underlying soil behavior and pore pressure response of individual soil layers. SelfSim is applied to the 1987 recordings from the Imperial Valley Wildlife Liquefaction Array. The extracted soil behavior suggests a new functional form for modeling the degradation of the shear modulus with respect to excess pore pressures. The extracted pore pressure response is dependent on the number and amplitude of shear strain cycles and has a functional form similar to current strain-based pore pressure generation models.