城市3维模型构建方法研究与实现

3维模型的构建是城市3维地理信息系统建设的核心。介绍了基于现有数据资料制作城市3维模型的工艺流程,重点研究了利用城市大比例尺3维DLG数据批量获取建筑物高度的新方法和贴图制作过程。按照上述制作工艺和方法较好地解决了大面积城市3维建模这一问题,生成的模型具有很高的精度,完全满足城市3维建模的精度要求。     

Metamorphic reactions in dry and aluminous granulites: a Perple_X <Emphasis Type="Italic">P–T</Emphasis> pseudosection analysis of the influence of effective reaction volume

In high-Mg, Al metapelites, monophase sapphirine corona occur around spinel–corundum aggregates in monomineralic cordierite layers, and bi-phase orthopyroxene–sillimanite aggregates replace locally warped sapphirine in polygonized cordierite aggregates. P–T phase topologies computed (Perple_X software) using compositions of cordierite-rich layers that host the reaction textures did not match the assemblages for the discontinuous reactions spinel + corundum + cordierite → sapphirine and sapphirine + cordierite → orthopyroxene + sillimanite. Instead, the reaction assemblages were reproduced using P–T pseudosection analysis for micro-domain reaction volumes estimated from compositions of product phases in the volume proportion they occur. The results are consistent with known phase relations deduced using Schreinmakers P–T grids. Apparently, the compositions of cordierite-rich layers that hosted the reaction textures were inadequate chemical proxies for determining P–T–X relations of phase-boundary controlled reactions influenced by compositions of the nearest-neighbor minerals in the proportion they react (effective composition), and not in the proportion they existed in the layer/bulk rock. In other words, P–T–X phase topologies and reconstructed P–T paths in dry and aluminous rocks may be best understood by thermodynamic modeling of reactions using effective reaction volume compositions rather than the bulk composition of the rock or the mineralogical layer that host the reaction textures.     

Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks,Japan, a possible high-pressure dehydration product of antigorite serpentinite

Spinifex-like textured metaperidotites from the Higo Metamorphic Rocks (HMR), west-central Kyushu, Japan, may be formed by high-pressure dehydration of antigorite, and may indicate deep subduction of serpentinite reaching a pressure–temperature condition of 1.6 GPa and 740–750 °C. Three rock types have been identified based on mineral assemblage and rock texture: Type I (L) consisting of medium-grained (1–5 cm long) olivine + enstatite + chromite ±tremolite with secondary talc and anthophyllite that occurs in low-grade metamorphic rocks of the biotite zone, Type I (H) of coarse-grained (up to 10 cm long) olivine + enstatite (with clinoenstatite lamella) + chromite ±tremolite with secondary talc that occurs in high-grade metamorphic rocks of the garnet-cordierite zone, and Type II composed of Al-spinel + chlorite + olivine + apatite + ilmenite with minor sodic gedrite in the garnet-cordierite zone together with Type I (H). Olivines in all rock types are mostly serpentinized during exhumation. The chromite-olivine thermometer gives 560–690 °C for Type I (L) rocks, and the spinel-olivine thermometer gives 610–740 °C for Type II rocks. The peak metamorphic pressure will be higher than 1.6 GPa based on the location of the experimentally determined invariant point (P = 1.6 GPa and T = 670 °C) of antigorite + forsterite + enstatite + talc + H₂O. This estimate is consistent with the occurrence of chlorite in Type II rocks, which is stable up to 890 °C at 2.0 GPa. The spinifex-like textured metaperidotites occur as small bodies in the low P/T type gneisses, implying tectonic juxtaposition of them probably during exhumation of the HMR. Recent findings of medium pressure (0.9–1.2 GPa) granulites and gneisses from the HMR may indicate that the HMR has a deep root into the wedge mantle from which the spinifex-like textured metaperidotites have derived.     

豆荚状铬铁矿豆状结构成因机制探讨--以遵化地区豆荚状铬铁矿为例

豆荚状铬铁矿是蛇绿岩套地幔构造岩中特征的矿产 ,其矿石发育丰富的岩浆 -变形结构构造类型 ,对认识大洋上地幔成因及其成矿过程具有重要意义。对遵化新太古代豆荚状铬铁矿的深入研究 ,发现它们发育了丰富的岩浆结构 (豆状结构、豆壳状结构等 ) ,还保留了大量凝缩标志和旋转特征。对比分析其各种特征结构发现豆状结构是由浸染状结构逐步演化形成的 ,并且旋转和凝缩是形成豆状结构的主要机理。豆荚状铬铁矿以其独特而稳定的物理化学特性 ,记录了大洋地幔深部岩浆活动(特别是扩张中心原始岩浆活动 )以及大洋岩石圈运动过程。因此 ,研究其成因机制能够为研究大洋上地幔动力学机制提供重要线索     

基于小波变换的遥感纹理信息提取

遥感纹理信息是地物空间特征的综合反映,综合纹理信息是进行专题信息提取获取的重要依据.遥感数据具有复杂性、统计性和随机性,同时,遥感图像中地学信息,如地质构造、蚀变信息及岩性分界等高频信息具有一定的方向性;小波变换具有"变焦性"、对称性、正则性等特点,可以较为快速地检测到奇变信号.利用小波变换可以快速、有效地提取遥感纹理高频奇变信息.     

碎石桩复合地基的抗液化特性探讨

饱和砂土地震液化问题是岩土地震工程中一个重要的研究课题。在多种可行的防治液化措施中 ,最普遍的方法是采用碎石桩复合地基。本文结合目前国内外碎石桩复合地基的抗液化研究的最新进展 ,对碎石桩的密实、排水减压和减震作用做了较详细的评述 ,最后还提出碎石桩复合地基抗液化特性需要进一步研究的问题     

桂中坳陷环江凹陷上古生界海相页岩储层孔隙结构和分形特征研究

通过有机地化分析、全岩X衍射矿物分析、甲烷等温吸附及低压氮气吸附实验,本文对桂中坳陷环江凹陷上古生界页岩样品的孔隙结构及分形特征进行了研究.结果表明:研究区页岩总有机碳含量(TOC)平均为2.40%,热成熟度(Ro)平均为2.65%,处于过成熟演化阶段.页岩主要的矿物组成为石英和黏土.页岩的比表面积平均为5.86 m2/g,孔容平均为0.014 9 mL/g,平均孔径为11.2 nm.页岩中发育大量的中孔,主要呈两端开口的圆筒形孔或四边开放的平行板状孔.页岩中TOC含量和石英含量越多,微-中孔越发育、比表面积和孔容越大,而平均孔径则变小.通过Frenkel-Halsey-Hill (FHH)模型和氮气吸附实验数据计算得到孔隙表面分形维数D1(平均为2.428 4)和孔隙结构分形维数D2(平均为2.622 2),对应的相对压力(P/P0)分别是0~ 0.45和0.45 ~ 0.99.分形维数D1、D2随着比表面积、孔容的增加而增加,而平均孔径随着前者的增加而减小.分形维数D1、D2、TOC含量、石英含量和甲烷吸附量之间呈现较好的正相关性,但随着黏土矿物含量的增多而减小.分形维数D1与Langmuir压力存在弱负相关性,分形维数D2随Langmuir压力增大有变大的趋势.桂中坳陷西北部页岩分形维数越大,孔隙结构越复杂,其对天然气的吸附和存储能力越强.     

How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.     

基于纹理合成的三维地形水墨风格渲染研究

提出了基于纹理合成的三维地形水墨风格渲染的方法,以规则格网DEM为数据源,基于OSG进行三维地形建模,在此基础上提取山体特征线,然后生成一幅灰度控制图像。对Efros01纹理合成算法进行改进,利用灰度控制图像指导水墨纹理的合成,将得到的纹理图像映射到三维地形上,实现对三维地形的水墨风格渲染,通过对水墨纹理样本的选择和纹理合成参数的设置能够实现对纹理合成过程的交互控制。结果表明,该渲染方法对三维地形的水墨风格渲染具有较好的效果。     

基于语义规则的高分辨率影像道路交叉口提取方法

为了准确提取遥感影像上道路交叉口目标,提出一种利用特征语义规则从高分辨率影像上提取道路交叉口的方法。该算法构建交叉口模型时将其视为由同质区域像素集合及区域轮廓边界构成的面对象,提取过程分为两步:1)利用辐射、纹理特征语义匹配提取交叉口候选区域;2)通过几何特征语义匹配筛选候选区域、识别交叉口属性。利用多源遥感影像对算法正确性及合理性进行验证,结果表明:算法能准确、完整地提取道路交叉口,可为影像道路网构建提供辅助信息。