A new approach to estimate canopy evaporation and canopy interception capacity from evapotranspiration and sap flow measurements during and following wetting

Canopy interception and its evaporation into the atmosphere during irrigation or a rainfall event are important in irrigation scheduling, but are challenging to estimate using conventional methods. This study introduces a new approach to estimate the canopy interception from measurements of actual total evapotranspiration (ET) using eddy covariance and estimation of the transpiration from measurements of sap flow. The measurements were conducted over a small‐scale sprinkler‐irrigated cotton field before, during and after sprinkler irrigation. Evaporation and sap flow dynamics during irrigation show that the total ET during irrigation increased significantly because of the evaporation of free intercepted water while transpiration was suppressed almost completely. The difference between actual ET and transpiration (sap flow) during and immediately following irrigation (post irrigation) represents the total canopy evaporation while the canopy interception capacity was calculated as the difference between actual ET and transpiration (sap flow) during drying (post irrigation) following cessation of the irrigation. The canopy evaporation of cotton canopy was calculated as 0.8 mm, and the interception capacity was estimated to be 0.31 mm of water. The measurement uncertainty in both the non‐dimensional ET and non‐dimensional sap flow was shown to be very low. Copyright © 2015 John Wiley & Sons, Ltd.     

Parallelized combined finite-discrete element (FDEM) procedure using multi-GPU with CUDA

This paper focuses on the efficiency of finite discrete element method (FDEM) algorithmic procedures in massive computers and analyzes the time-consuming part of contact detection and interaction computations in the numerical solution. A detailed operable GPU parallel procedure was designed for the element node force calculation, contact detection, and contact interaction with thread allocation and data access based on the CUDA computing. The emphasis is on the parallel optimization of time-consuming contact detection based on load balance and GPU architecture. A CUDA FDEM parallel program was developed with the overall speedup ratio over 53 times after the fracture from the efficiency and fidelity performance test of models of in situ stress, UCS, and BD simulations in Intel i7-7700K CPU and the NVIDIA TITAN Z GPU. The CUDA FDEM parallel computing improves the computational efficiency significantly compared with the CPU-based ones with the same reliability, providing conditions for achieving larger-scale simulations of fracture.     

运用ENVI实现SPOT-5卫星影像的RVI提取

运用ENVI软件处理长沙地区的SPOT-5影像,将全色影像和多波段影像进行融合,分析融合后的影像,再选择感兴趣区域进行影像裁剪;采用ENVI的波段运算(Band3/Band2)提取该地区比值植被指数并进行分析。结果表明:比值植被指数对植被覆盖率较高的区域有非常高的敏感度;在植被覆盖率小于50%的时候,其敏感度明显降低,在绿色植被覆盖区域的比值植被指数远大于1,在裸露地表、建筑物、水体等没有植被覆盖区域的比值植被指数则在1附近,而比值植被指数大于2的则出现在高覆盖健康绿色植被上。     

Deciphering As and Cu cycling in sediment pore waters in a large marina (Port Camargue,southern France) using a multi-tracer (Fe,Mn, U,Mo) approach

The sediments of the Port Camargue marina (South of France) are highly polluted by Cu and As (Briant et al., 2013). The dynamics of these pollutants in pore waters was investigated using redox tracers (sulfides, Fe, Mn, U, Mo) to better constrain the redox conditions.In summer, pore water profiles showed a steep redox gradient in the top 24 cm with the reduction of Fe and Mn oxy-hydroxides at the sediment water interface (SWI) and of sulfate immediately below. Below a depth of 24 cm, the Fe, Mn, Mo and U profiles in pore waters reflected Fe and Mn reducing conditions and, unlike in the overlying levels, sulfidic conditions were not observed. This unusual redox zonation was attributed to the occurrence of two distinct sediment layers: an upper layer comprising muddy organic-rich sediments underlain by a layer of relatively sandy and organic-poor sediments. The sandy sediments were in place before the building of the marina, whereas the muddy layer was deposited later. In the muddy layer, large quantities of Fe and Mo were removed in summer linked to the formation of insoluble sulfide phases. Mn, which can adsorb on Fe-sulfides or precipitate with carbonates, was also removed from pore waters. Uranium was removed probably through reduction and adsorption onto particles. In winter, in the absence of detectable pore water sulfides, removal of Mo was moderate compared to summer.Cu was released into solution at the sediment water interface but was efficiently trapped by the muddy layer, probably by precipitation with sulfides. Due to efficient trapping, today the Cu sediment profile reflects the increase in its use as a biocide in antifouling paints over the last 40 years.In the sandy layer, Fe, Mn, Mo and As were released into solution and diffused toward the top of the profile. They precipitated at the boundary between the muddy and sandy layers. This precipitation accounts for the high (75 μg g⁻¹) As concentrations measured in the sediments at a depth of 24 cm.     

A note on “Origin of components in Chilean thermal waters” by

Risacher et al. (2011) have presented voluminous data on thermal waters of Chile that is quite appreciable; however, their work still falls short on several counts. The most notable shortcoming of the work is the presentation and treatment of data. The interpretations are based on questionable premises (viz., extent of seawater intrusion) and considerations (viz., using average chemical composition of rock types for geochemical modeling, considering volcanic rocks as the only rock type in contact with the geothermal fluids) and assumptions not always substantiated by facts (with proper references) could have been corroborated. Use of Cl/Br ratio for discrimination purpose is unconvincing, considering the uncertainty in the measurement of low (<1 mg/L) Br concentration.     

延边开山屯花岗闪长岩-石英闪长岩体年代学、地球化学特征及对古太平洋板块俯冲作用时限的制约

近年来古太平洋构造域的构造演化备受学者关注。本文报道的延边开山屯地区花岗闪长岩-石英闪长岩体LAICP-MS U-Pb年龄表明其形成时间为早侏罗世早期(198±1Ma),所采样品可根据Zr/Hf值分为高Zr/Hf值组花岗闪长岩和低Zr/Hf值组石英闪长岩。高Zr/Hf值组花岗闪长岩起源深度浅,富集Rb、Th、U、K等大离子亲石元素(LILEs),贫Nb、Ta、Ti等高场强元素(HFSEs),具壳源岩浆的特点。低Zr/Hf值组为壳源岩浆与来自深部的亏损地幔岩浆混合而成,岩石亏损Nb、Ta、Zr、Hf、Ti等高场强元素,具有典型的弧型岩浆地球化学特征。岩体中存在细粒闪长质包体,镜下可见针柱状磷灰石。开山屯岩体属钙碱性系列岩石,结合前人资料,认为其与该地区同时代火成岩组成北-东向分布的早侏罗世活动大陆边缘型火成岩带,而位于该带西侧的小兴安岭-张广才岭地区存在同时代弧后拉张带,两者构成典型的大陆弧与弧后拉张带模型,共同揭示了早侏罗世早期古太平洋板块对东北地区的俯冲作用。     

黄海南部小黄鱼洄游分布及种群结构特征

Monthly fishery survey data of the small yellow croaker Larimichthys polyactis in the southern Yellow Sea from2003 and 2013 were employed to evaluate the variation in the resource distribution and biological characteristics(especially body length and sex ratio) in the population on a decadal scale.The results indicated that the small yellow croaker migrated from the Shawai fishing ground to the Dasha fishing ground in spring and was mainly distributed in the central and western parts of the Dasha fishing ground in April and May.Larimichthys polyactis in the Dasha fishing ground migrated eastward to offshore wintering grounds in autumn and reached the central Dasha fishing ground in October and November.The small yellow croaker entered the western waters of the Shawai fishing ground in winter.A large number of age 0+ fish occurred in the Shawai and Jiangwai fishing grounds in October of 2003 and 2013.The body lengths of the spawning stock and wintering stock in 2013 were larger than those in 2003,and the monthly sex ratios(female to male) were significantly less than 1 in both years.The monthly distribution of this fish in the southern Yellow Sea was consistent with a previous finding that "the stock migrated between the wintering grounds in the west of Jeju Island and the Lüsi spawning grounds" but tended to move more northward,with the spawning grounds extending outward.In the past decade,body length variation experienced a decline after an increase,rather than a steady decrease.The sex ratio in the single-stick stow net showed a tendency to increase over the decade,but was either less than or more than 1 depending on the fishing gear;therefore,further studies should be conducted to determine the sex structure.     

Nano-scale pore structure and fractal dimension of organic-rich Wufeng-Longmaxi shale from Jiaoshiba area,Sichuan Basin: Investigations using FE-SEM,gas adsorption and helium pycnometry

Much attention have been recently paid to the upper Ordovician Wufeng shale (O₃w) and lower Silurian Longmaxi shale (S₁l) in the Jiaoshiba area of Sichuan Basin, which is now the largest producing shale gas field in China. Field emission scanning electron microscopy (FE-SEM), low pressure gas (N₂ and CO₂) adsorption, helium pycnometry, X-ray diffraction and geochemical analyses were performed to investigate the pore structure and fractal dimension of the pores in O₃w-S₁l shale formation in the Jiaoshiba area. FE-SEM images show that organic matter (OM) pores are dominant in the organic-rich samples and these pores are often irregular, bubble-like, elliptical and faveolate in shape, while in organic-poor samples, limited and isolated interparticle (interP), intraparticle (intraP) and OM pores are observed. Reversed S-shaped isotherms obtained from nitrogen adsorption are type Ⅱ, and hysteresis loops indicate that the shape of micropore in the samples is slit-or plate-like. BET surface areas and total pore volume vary from 12.2 to 27.1 m²/g and from 1.8 × 10⁻² to 2.9 × 10⁻² cm³/g, with an average of 19.5 m²/g and 2.3 × 10⁻² cm³/g, respectively. Adsorption volume from both N₂ and CO₂ adsorption increases with respect to TOC contents. Porosities obtained from helium porosimetry are comparable with these from gas (CO₂ and N₂) adsorption in O₃w-S₁l shale. However, porosity determined by quantitative FE-SEM analysis is much smaller, which is mainly related to limited resolution and the small areas of investigation.Based on the Frenkel-Halsey-Hill (FHH) model of low-pressure N₂ adsorption, fractal dimensions of the pores varied from 2.737 to 2.823. Relationships between pore structure parameters and TOC content, mineral composition and fractal dimension reveal that the fractal dimension is mainly associated with micropores. Samples with higher TOC content, higher quartz content and lower clay content tend to contain more heterogeneous micropores, resulting in higher fractal dimensions and more complicated pore structure in shales. Therefore, fractal dimension is an effective parameter to reflect the complexity of pore structure and the degree of micropore development in O₃w-S₁l shale.     

Controls on reservoir heterogeneity of tight sand oil reservoirs in Upper Triassic Yanchang Formation in Longdong Area,southwest Ordos Basin,China: Implications for reservoir quality prediction and oil accumulation

Compared to conventional reservoirs, pore structure and diagenetic alterations of unconventional tight sand oil reservoirs are highly heterogeneous. The Upper Triassic Yanchang Formation is a major tight-oil-bearing formation in the Ordos Basin, providing an opportunity to study the factors that control reservoir heterogeneity and the heterogeneity of oil accumulation in tight oil sandstones.The Chang 8 tight oil sandstone in the study area is comprised of fine-to medium-grained, moderately to well-sorted lithic arkose and feldspathic litharenite. The reservoir quality is extremely heterogeneous due to large heterogeneities in the depositional facies, pore structures and diagenetic alterations. Small throat size is believed to be responsible for the ultra-low permeability in tight oil reservoirs. Most reservoirs with good reservoir quality, larger pore-throat size, lower pore-throat radius ratio and well pore connectivity were deposited in high-energy environments, such as distributary channels and mouth bars. For a given depositional facies, reservoir quality varies with the bedding structures. Massive- or parallel-bedded sandstones are more favorable for the development of porosity and permeability sweet zones for oil charging and accumulation than cross-bedded sandstones.Authigenic chlorite rim cementation and dissolution of unstable detrital grains are two major diagenetic processes that preserve porosity and permeability sweet zones in oil-bearing intervals. Nevertheless, chlorite rims cannot effectively preserve porosity-permeability when the chlorite content is greater than a threshold value of 7%, and compaction played a minor role in porosity destruction in the situation. Intensive cementation of pore-lining chlorites significantly reduces reservoir permeability by obstructing the pore-throats and reducing their connectivity. Stratigraphically, sandstones within 1 m from adjacent sandstone-mudstone contacts are usually tightly cemented (carbonate cement > 10%) with low porosity and permeability (lower than 10% and 0.1 mD, respectively). The carbonate cement most likely originates from external sources, probably derived from the surrounding mudstone. Most late carbonate cements filled the previously dissolved intra-feldspar pores and the residual intergranular pores, and finally formed the tight reservoirs.The petrophysical properties significantly control the fluid flow capability and the oil charging/accumulation capability of the Chang 8 tight sandstones. Oil layers usually have oil saturation greater than 40%. A pore-throat radius of less than 0.4 μm is not effective for producible oil to flow, and the cut off of porosity and permeability for the net pay are 7% and 0.1 mD, respectively.     

Geological control factors of micro oil distribution in tight reservoirs

Understanding the oil distribution characteristics in unconventional tight reservoirs is crucial for hydrocarbon evaluation and oil/gas extraction from such reservoirs. Previous studies on tight oil distribution characteristics are mostly concerned with the basin scale. Based on Lucaogou core samples, geochemical approaches including Soxhlet extraction, total organic carbon (TOC), and Rock-Eval are combined with reservoir physical approaches including mercury injection capillary pressure (MICP) and porosity-permeability analysis, to quantitatively evaluate oil distribution of tight reservoirs on micro scale. The emphasis is to identify the key geological control factors of micro oil distribution in such tight reservoirs. Dolomicrites and non-detrital mudstones have excellent hydrocarbon generation capacity while detritus-containing dolomites, siltstones, and silty mudstones have higher porosity and oil content, and coarser pore throat radius. Oil content is mainly controlled by porosity, pore throat radius, and hydrocarbon generation capacity. Porosity is positively correlated with oil content in almost all samples including various lithologies, indicating that it is a primary constraint for providing storage space. Pore throat radius is also an important factor, as oil migration is inhibited by the capillary pressure which must be overcome. If the reservoir rock with suitable porosity has no hydrocarbon generation capacity, pore throat radius will be decisive. As tight reservoirs are generally characterized by widely distributed nanoscale pore throats and high capillary pressure, hydrocarbon generation capacity plays an important role in reservoir rocks with suitable porosity and fine pore throats. Because such reservoir rocks cannot be charged completely. The positive correlation between hydrocarbon generation capacity and oil content in three types of high porosity lithologies (detritus-containing dolomites, siltstones, and silty mudstones) supports this assertion.