Deciphering potential groundwater zone in hard rock through the application of GIS

Remote Sensing and Geographic Information System has become one of the leading tools in the field of hydrogeological science, which helps in assessing, monitoring and conserving groundwater resources. It allows manipulation and analysis of individual layer of spatial data. It is used for analysing and modelling the interrelationship between the layers. This paper mainly deals with the integrated approach of Remote Sensing and geographical information system (GIS) to delineate groundwater potential zones in hard rock terrain. The remotely sensed data at the scale of 1:50,000 and topographical information from available maps, have been used for the preparation of ground water prospective map by integrating geology, geomorphology, slope, drainage-density and lineaments map of the study area. Further, the data on yield of aquifer, as observed from existing bore wells in the area, has been used to validate the groundwater potential map. The final result depicts the favourable prospective zones in the study area and can be helpful in better planning and management of groundwater resources especially in hard rock terrains.     

The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Modeling of water–rock interactions in an aquitard of sandy clay in the coastal area near Beihai,China

Unconsolidated sand, gravel and clay deposits near Beihai and in the Leizhou Peninsula in southern China form an unconfined aquifer, aquitard and a confined aquifer. Water and soil samples were collected from the two aquifers in the coastal Beihai area for the determination of chemical compositions, minerals and soluble ions. Hydrogeochemical modeling of three flow paths through the aquitard are carried out using PHREEQC to determine water–rock interactions along the flow paths. The results indicate that the dissolution of anorthite, fluorite, halite, rhodochrosite and CO₂, and precipitation of potash feldspar and kaolinite may be occurring when groundwater leaks through the aquitard from the unconfined aquifer to the confined aquifer. Cation exchanges between Na and Ca can also happen along the flow paths.     

Discussion on “Experimental study on fracture toughness and tensile strength of a clay” [Engineering Geology 94 (2007) 64–75]

The paper [Wang, J.-J., Zhu, J.-G., Chiu, C.F., Zhang, H., 2007. Experimental study on fracture toughness and tensile strength of a clay. Engineering Geology 94, 64–75.] focuses on two important fracture parameters of soils: tensile strength and fracture toughness. These parameters control the behaviour of soils in a wide range of situations, from the design of a simple footing to much complicated fracture behaviour of clay liners or covers. The authors have done extensive laboratory work to determine these two parameters and their laborious and complicated experimental program needs praise. However, some of the points raised in their conclusions, based on the analysis and comparison with the data from the literature, need to be discussed.     

Shear strength characterization of municipal solid waste at the Suzhou landfill, China

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.     

Weibull statistical analysis of granite bending strength

Summary  This paper describes and discusses the adequacy of Weibull statistical analysis to analyse the bending strength of granite. The experimental results show that strength variability is related with a specific origin of failure. This conclusion is based on analysing the influence of the surface condition (extrinsic defects) on the bending strength results treated by the Weibull statistics. The conclusions drawn from this study have been validated by analysing the results of the critical flaw dimension estimated by applying the linear elastic fracture mechanics (LEFM) formulae. Results obtained from fractographic examination also have been used to describe the location of the origin of the fracture and understand the distribution of defects; i.e., there is a unimodal distribution of defects (intrinsic defects), despite the fact that some outlier values are normally observed in the fractured surfaces. Correspndence: P. M. Amaral, Department of Materials Engineering, Instituto Superior Técnico, Technical University of Lisbon, Av. Rovisco Pais, 1049-001 Lisboa, Portugal     

内蒙阿右旗铁板井镍矿矿床特征及成因探讨

铁板井绦矿床赋存于辉橄岩体中,辉橄岩体具有全岩矿化的特点,岩体及镍矿体的形成经历了三种不同的成矿过程:首先是岩浆深源液态重力分异作用,而后发生岩浆深源熔离-贯入(成岩、成矿)作用,形成岩体和镍矿体,最后在岩浆期后热液作用的叠加下完成整个成矿过程.该矿床是典型的主要由岩浆熔离作用形成的岩浆矿床.     

引水工程秦巴段隧洞地应力模拟及工程地质问题

利用Ansys有限元软件对三峡引水工程秦巴段线路不同深度、不同截面形态隧洞围岩的应力重分布情况进行模拟计算,得到圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力数值和等值线图.利用库仑一纳维尔强度准则,对花岗岩区及灰岩区隧洞围岩的剪切破坏进行分析;利用三种岩爆应力判别指标,对岩爆进行初步预测;进而对不同深度、不同截面形态的隧洞围岩的稳定性进行分析;最后对引水工程隧洞设计中截面形态的选择给出了初步建议.     

柴达木盆地北缘侏罗系两类不同有机质丰度泥岩的 生物标志物特征对比研究

在柴达木盆地北缘地区,分别选取有机碳含量很低和较高的侏罗系泥岩样品,对比分析了它们在生物标志物组成上的差异。结果发现,高有机质丰度泥岩的生标组成与我国西北地区侏罗纪煤系有机质的特征差异不大,相比而言,低有机质丰度泥岩的正烷烃以前主峰为特征,Pr/Ph比值在1.0左右,三环萜烷和伽马蜡烷丰度较高,并在部分样品中检出了25 降藿烷系列。结合泥岩的有机岩石学特征,认为这些差异可能反映了泥岩沉积环境和生烃母质的不同:高有机质丰度泥岩的有机显微组分以相对弱还原条件下的形态有机质为主,包括藻类体、孢子体和角质体等,而低有机质丰度泥岩的有机显微组分以相对强还原条件下的矿物沥青基质为主,其母质可能来源于低等显微菌藻类。进一步通过对比不同有机质丰度泥岩,以及区内原油生标组成之间的相互关系,讨论了研究区的油源问题。     

东天山黄山-镜儿泉过铝花岗岩矿物学、地球化学及年代学研究

对东天山黄山-镜儿泉一带黄山南、镜儿泉、图拉尔根沟三个过铝花岗岩作了岩相学、矿物学、地球化学、sr-Nd同位素和锆石U-Pb年代学研究.锆石U-Pb LA-ICP-MS原位定年测得黄山南岩体结晶年龄为259.9±1.4Ma(MSWD=0.86),图拉尔根沟岩体结晶年龄为275.4±8.3Ma(MSWD=29),均侵位于二叠纪碰撞后伸展环境.三个过铝花岗岩均具有低锶同位素初始比值(Isr=0.6969～0.70396)、高εNd(t)值( 5.5～ 7.2)以及年轻的亏损地幔单阶段模式年龄(tDM=0.48～0.56Ga),表明其岩浆源区均为来源于亏损地幔的新生地壳岩石.这种新生地壳岩石可能为偏酸性的火山岩.三个岩体的矿物学和地球化学可分为两类:一类以黄山南白云母花岗岩为代表,为强过铝花岗岩(A/CNK>1.1),强烈亏损Ba、sr和Ti而富集Cs、Rb和K,具有高的Rb/sr(2.03～14.5)和Al2O3/TiO2(110～1592),低的Nb/Ta(3.24～6.76)比值,其稀土元素配分曲线呈"V"字形,显示强烈铕亏损(Eu/Eu*=0.04～0.55),表明这类岩体的直接源岩以泥质岩为主.另一类以图拉尔根沟二云母花岗岩为代表,为弱过铝(1