川东长兴组台缘礁滩相储层纵向非均质性特征及形成机制——以川东宣汉盘龙洞长兴组剖面为例

近几年,随着四川盆地海相碳酸盐岩储层勘探的不断加强,碳酸盐岩储层强的非均质性已成为制约礁滩气藏勘探开发的现实问题。以川东宣汉盘龙洞长兴组典型台缘礁滩剖面为研究对象,通过对典型台缘礁滩野外剖面的精细观察,结合镜下薄片及岩矿资料分析,重点探讨了盘龙洞礁滩储层纵向非均质性特征及成因。剖面上礁滩体垂向上存在很强的旋回性和储层非均质性,其储集岩分布、储层厚度、白云岩化程度、溶蚀作用等受海平面周期性的升降变化影响而呈现周期性变化。礁滩储层非均质性受高能相带、海平面升降变化和建设性成岩作用的共同控制,高能相带控制储层原生孔隙的发育,决定了储层的沉积非均质性,白云岩化和溶蚀作用有利于礁滩体储层的形成,大气淡水淋滤改造对于优化储层具有关键作用,海平面升降变化决定了礁滩体旋回性发育,而建设性成岩作用的选择性改造深化了储层非均质性。     

西藏塔惹增地区下白垩统捷嘎组的厘定及其地质意义

笔者于西藏仲巴县塔惹增地区一带前人划分的一套早白垩世早期则弄群中发现了具有典型意义的、代表早白垩世晚期的Ampullina xainzaensis Yu,Ampullina cf. larteli Landerer,Tylostoma cf. brasilianus Maury,Pseudamaura cf. subfournaeti (Pcelincev),Gyrodes gaultiana Orbigny,Leviathania cf. gerassimovi(Pcelincev),Gymnentome cf. pizcuetana(Vilanova)等腹足类化石,以及较为丰富的中圆笠虫Mesorbitolina sp.和达克斯虫Daxia sp。表明在该区则弄群中至少有一部分以前没有被识别出的早白垩世晚期地层。通过岩石组合特征、基本层序、生物化石时代对比,将该套地层归属于捷嘎组。这一地层的确定为冈底斯带白垩系地层划分对比、地层格架建立提供了重要的依据,并丰富了该地层的古生物资料,且为中生代盆地的演化历史、古地理轮廓的确定提供了新的基础资料。     

Theropod assemblages and a new ichnotaxon Gigandipus chiappei ichnosp. nov. from the Jiaguan Formation,Lower Cretaceous of Guizhou Province,China

A newly discovered Jiaguan Formation(Lower Cretaceous) tracksite from the Linjiang region of Guizhou Province, China, reveals the first example of a Cretaceous track morphotype attributable to the non-avian theropod ichnogenus Gigandipus, here named Gigandipus chiappei ichnosp nov. The theropod dominated locality also reveals the second report of the avian theropod ichnogenus Wupus, one of the largest avian traces currently known from the Lower Cretaceous. The Linjiang site provides evidence to support previous interpretations of a distinctive Lower Cretaceous theropod-dominated ichnofauna that was widespread in China and East Asia and highlights the similarity between Lower Cretaceous theropod ichnotaxa in East Asia and those found in the Lower Jurassic both in East Asia and elsewhere. These similarities in turn create various ichnotaxonomic challenges familiar to researchers working on theropod tracks, and we recommend caution in the naming of new theropod ichnotaxa at the ichnogenus level.     

The geothermal formation mechanism in the Gonghe Basin: Discussion and analysis from the geological background

The Gonghe Basin, a Cenozoic down-warped basin, is located in the northeastern part of the Qinghai-Xizang (Tibetan) Plateau, and spread over important nodes of the transfer of multiple blocks in the central orogenic belt in the NWW direction. It is also called “Qin Kun Fork” and “Gonghe Gap”. The basin has a high heat flow value and obvious thermal anomaly. The geothermal resources are mainly hot dry rock and underground hot water. In recent years, the mechanism of geothermal formation within the basin has been controversial. On the basis of understanding the knowledge of predecessors, this paper proposes the geothermal formation mechanism of the “heat source–heat transfer–heat reservoir and caprock–thermal system” of the Gonghe Basin from the perspective of a geological background through data integration-integrated research-expert, discussion-graph, compilation-field verification and other processes: (1) Heat source: geophysical exploration and radioisotope calculations show that the heat source of heat in the basin has both the contribution of mantle and the participation of the earth’s crust, but mainly the contribution of the deep mantle. (2) Heat transfer: The petrological properties of the basin and the exposed structure position of the surface hot springs show that one transfer mode is the material of the mantle source upwells and invades from the bottom, directly injecting heat; the other is that the deep fault conducts the deep heat of the basin to the middle and lower parts of the earth’s crust, then the secondary fracture transfers the heat to the shallow part. (3) Heat reservoir and caprock: First, the convective strip-shaped heat reservoir exposed by the hot springs on the peripheral fault zone of the basin; second, the underlying hot dry rock layered heat reservoir and the upper new generation heat reservoir and caprock in the basin revealed by drilling data. (4) Thermal system: Based on the characteristics of the “heat source-heat transfer-heat reservoir and caprock”, it is preliminarily believed that the Gonghe Basin belongs to the non-magmatic heat source hydrothermal geothermal system (type II2₁) and the dry heat geothermal system (type II2₂). Its favorable structural position and special geological evolutionary history have given birth to a unique environment for the formation of the geothermal system. There may be a cumulative effect of heat accumulation in the eastern part of the basin, which is expected to become a favorable exploration area for hot dry rocks.     

西藏加查拉岗村巨型古滑坡发育特征与形成机理研究

青藏高原地质构造活跃,内外动力作用强烈,加之气候异常变化,区内大型滑坡发育。以雅鲁藏布江断裂附近新发现的拉岗村古滑坡为研究对象,在现场调查、槽探揭露、地质测年和工程地质分析等基础上,对其发育特征及成因机制进行了分析研究。研究表明,(1)拉岗村滑坡属巨型岩质滑坡,体积达3.6×107 m3,最大水平滑动距离约3050m,滑坡后壁与堆积体前缘高差达965m,最大运动速率达78.1m/s,具明显高速远程特征;(2)受冷冻风化和冰体"楔劈"作用影响,滑坡后部岩体崩裂,全新世以来气候变化冰川逐渐消退,融雪降水入渗加剧劣化岩体结构,降低岩体强度;(3)根据14 C和10Be测年结果,拉岗村古滑坡形成于距今4140~9675a,沿雅鲁藏布江断裂发生的强震可能是该滑坡的直接诱因,岩体受到地震抛掷力作用,原有节理裂隙和新生破裂面发生张剪-拉裂破坏迅速贯通,首先沿断裂附近碎裂结构岩体发生破坏,上部岩体随之失稳并高速下滑。该研究可为认识青藏高原断裂带内大型古滑坡的形成机理提供借鉴。     

羌塘盆地晚侏罗世夏里组磁学参数指示的沉积环境及其成盐意义

羌塘盆地位于青藏高原中部,是一个具有沉积钠盐、钾盐远景的蒸发岩盆地。最近在羌塘盆地上侏罗统夏里组中发现多处具有钾、钠异常的盐泉这一重要的找钾盐线索,然而目前对上侏罗统夏里组的古环境演变仍然不甚了解,限制了对晚侏罗世羌塘盆地的成盐(成钾)条件和可能的层位等重大科学问题的理解。因此本文以热磁分析为主,对羌塘盆地雁石坪地区上侏罗统夏里组沉积物进行高分辨率岩石磁学研究,并讨论其古环境意义。最后,根据成盐(成钾)理论,综合分析羌塘盆地上侏罗统夏里组成盐(成钾)的构造、气候和物源条件。κ-T曲线、磁滞回线和热退磁结果共同表明磁铁矿和赤铁矿是夏里组的主要载磁矿物;磁学参数分析表明夏里组上段赤铁矿含量相对增加,揭示夏里组上段形成于干旱气候环境;综合分析构造、气候和物源条件表明,羌塘盆地上侏罗统夏里组上段最为具备良好的成盐(成钾)条件。     

渤海湾盆地南堡凹陷南部深层沙一段优质碎屑岩储层特征及成因机制

利用岩芯、薄片、扫描电镜和分析化验等资料,对南堡凹陷南部深层古近系沙一段（沙河街组一段）优质碎屑岩储层特征进行了分析并揭示其成因机制。研究表明：①南堡凹陷南部沙一段优质碎屑岩储层属于低孔中渗储层,发育原生孔隙、次生孔隙和微裂缝;②沙一段沉积期处于强水动力沉积环境,辫状河三角洲前缘水下分流河道砂体普遍发育,岩性主要为中粗砂岩、含砾砂岩和砂砾岩等粗岩性,岩石类型主要为岩屑长石砂岩,石英、岩浆岩岩屑等刚性组分含量高,储层在强压实作用下仍保留了局部原生残余粒间孔,部分刚性组分强压条件下形成微裂缝;③沙一段与东三段为区域不整合接触,大气水的酸性流体在成岩初期以及烃源岩成熟之后产生的有机酸在成岩后期通过油源断裂和不整合面进入储层,造成长石、易溶碎屑等组分溶蚀形成次生孔隙,溶蚀作用不仅增加孔隙空间,而且扩大喉道宽度。结论认为：粗岩性和高刚性颗粒含量为原生孔隙的保存提供了物质基础;油源断层、不整合面为酸性流体的进入提供路径,促进了次生孔隙发育。     

黔水地1井钻探施工技术难点及对策

总结了桂中-南盘江地区页岩气调查黔水地1井在钻进过程中出现的严重井漏、卡埋钻、起下钻或通井遇阻等技术难点及相应的处理措施。由于钻遇的地层较为复杂,因此综合采取了回填粘土、商砼封堵、顶漏钻进、岩屑打捞、空气钻进、跟管钻进、套管封隔等多种措施进行处理;此外,结合实际工程应用提出了针对该复杂地层的多种钻井液配方,均取得了一定的效果。处理技术难点的过程中所积累的钻探技术和钻井液技术的优化经验能够为日后黔西南复杂构造区页岩气勘探的实施提供一定的参考依据。     

白涧铁矿南区复杂地层钻探施工技术

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。     

基于非均质地层参数表征的颗粒流模型构建

非均质地层参数的获取与表征方法是浅层地质体改造的重要依据。基于非均质地层的地质建模,表征具有随机不确定性和模糊不确定性的土体表观参数和物理力学参数。利用 Weibull 分布统计描述局部地层信息,并应用Diamond-Square分形插值方法,结合差分盒子维计算非均质地层分形维数,进一步合理演算整体地层参数。采用PFC3D数值模拟软件,结合马尔科夫链蒙特卡洛方法采样数据,对非均质地层块石颗粒及土颗粒进行建模。通过非均质地层模拟结果,发现其破坏过程与应力应变曲线要比均质土体复杂得多,由于块石大颗粒的含量、分布特性对土样力学性质影响显著。本文建模方法有助于非均质地层参数表征研究。