Smoothing and re-roughening processes: The geometric evolution of a single fault zone

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.     

顾及拓扑与尖角的分类矢量数据分组压缩算法

针对现有拆分重组法对存在复杂内环以及复杂相交岛屿多边形的分类矢量数据的压缩结果中包含裂缝、重叠及大量尖锐夹角的问题,提出了一种顾及拓扑一致性与尖角的分组压缩方法。依据分类矢量数据中多边形与多边形及其内环的相交关系对矢量矢量数据分组,以修正后拆分重组法结合直接分割法和间接分割法对分类矢量数据分组压缩,压缩结果中不存在裂缝与重叠现象,维护了分类矢量数据的拓扑一致性;通过取回尖角点前后被删除的点,解决了压缩结果中尖角过多的问题。以Landsat8遥感影像分类矢量数据实验验证了文章算法,并与直接分割法、间接分割法、拆分重组法进行了对比分析,验证了本文方法的有效性。     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.     

小入射角下海浪后向散射系数不对称性和各向异性分析验证

基于北京遥测技术研究所机载波谱仪实测数据以及ECMWF提供的风场数据,分析了不同风速条件下小入射角海浪平均后向散射系数不对称性与各向异性随入射角的变化特性,并对导致这一现象的原因进行了初步分析。结果表明:小入射角下,海浪平均后向散射系数随入射角增大呈现递减趋势并在18°时达到某一稳定值,之后基本维持不变;海浪后向散射系数不对称性与各向异性均随入射角增大呈现递增趋势,同样在18°增大至某一稳定值,之后基本维持不变;低风速条件下,海浪不对称性和各向异性与风速有关,且风速越大不对称性与各向异性越明显。     

基于Hyperion高光谱数据和随机森林方法的岩性分类与分析

探索利用高光谱数据的岩性填图新方法是遥感地质应用领域的重要需求之一。本文运用随机森林方法和EO-1Hyperion高光谱数据,对新疆塔里木西北部柯坪地区的局部区域进行岩性分类,并对相关问题进行分析。分别利用光谱特征以及加入光谱一阶导数特征进行岩性分类,并对不同特征对岩性分类的重要性进行分析,同时与现有的基于光谱角制图方法(SAM)进行比较。结果表明,与SAM方法相比,随机森林方法得到了更高精度的岩性分类结果,是一种有效可行的岩性分类方法。根据特征重要性的排序,蓝绿光波段、短波红外波段以及相应的一阶导数特征对研究区Hyperion数据的沉积岩岩性分类贡献更大。     

浅圆沉积谷地对瑞雷波的散射--高频解

利用波函数展开法给出了浅圆沉积谷地对瑞雷波散射的一个高频解析解,并分析了入射频率、沉积谷地宽度和深度等因素对波散射的影响. 数值结果表明,由于沉积谷地的影响, 在入射波的近端,地表位移分布变得相对复杂,但位移幅值并不大;而在入射波远端,地表位移分布相对简单,但位移幅值却相对较大,多数情况下高于沉积地表位移幅值.      

平面SV波入射下半圆凸起地形地表运动解析解

采用波函数展开法,并借助辅助函数思想,给出了平面SV波入射下半圆凸起地形地表运动的一个解析解,并对解答的收敛性和截断计算精度进行了检验;最后通过若干算例分析了入射频率和入射角度以及凸起地形宽度对地表运动的影响. 数值结果表明,凸起地形对入射SV波具有显著的放大作用, 该放大作用可达自由场的4倍以上. 当入射频率较低时, 位移峰值多位于半空间地表; 而当入射频率较高时,位移峰值多位于凸起地形表面.      

植被高光谱特征分析及其病害信息提取研究

高光谱(hyperspectral)遥感是20世纪末地球观测系统中最重要的技术突破之一。根据植被高光谱数据的植被冠层光谱反射特征和诊断性光谱吸收特征,利用光谱连续统去除法,探讨光谱一阶微分反射比(FDR)和从连续统去除的光谱吸收特征中获得的波段深度(BD)、连续统去除后微分反射比(CRDR)、波段深度比(BDR)和归一化波段深度指数(NBDI)等光谱特征参量。结合多时相的条锈病小麦PHI航空高光谱影像,分析条锈病对小麦光谱的影响及其光谱特征,并运用光谱特征参量和波谱角制图(SAM)技术监测和识别小麦条锈病。     

一种新的实时电磁逆散射方法

为解决介质圆柱体逆散射问题,提出一种新的在线逆散射方法,通过支持向量机将逆散射问题转化成一个回归估计问题. 该方法可应用于各种逆散射方面, 尤其是目标的几何与电磁参数重构和埋地目标探测. 文中首次将支持向量机方法应用到该领域,设置多个散射场的观测点,通过提取散射场的不同信息作为样本信息训练支持向量机, 建立了介质圆柱体的逆散射模型, 利用该模型重构了介质圆柱体的电磁参数,同时探测了埋地位置. 数值结果显示了该方法的有效性和准确性,为目标的实时逆散射研究提供了一种有效方法.     

弹性波阻抗在时移地震中的应用分析

常规声波波阻抗由于缺乏横波的信息,使得它对于流体的变化很不敏感,而弹性波阻抗反演,除了与纵波速度,密度有关之外,还与横波速度、入射角度有关,由于考虑了AVO(Amplitude Variation with Offset)效应,使得对流体和岩性的预测能力增强.本文将弹性波阻抗反演应用于时移地震中,采用AVA(Amplitude Variation with Angle)约束稀疏脉冲反演来进行弹性波阻抗反演,得到纵横波阻抗等弹性参数,通过交会图分析,将弹性参数转换为油藏参数,如预测含水饱和度的变化,通过本方法可增强对储层流体的预测,提高储层管理能力.