五圆柱体结构群绕流特性及互扰效应研究

基于Fluent流体计算平台,运用大涡模拟方法对亚临界雷诺数Re=3900下“X”形排列五圆柱体结构群三维绕流特性进行研究,主要分析来流攻角α与间距比L/D两个关键参数对五圆柱体结构群的尾流区三维涡结构演化与流体力系数的影响,并揭示其内在流动互扰机理。研究表明:来流攻角和间距比的变化对五圆柱体结构群流动控制及互扰效应的影响显著。在小间距比工况下,观察到柱体群间隙区域内流体高速流动的现象,导致五圆柱体之间的互扰作用十分强烈。间隙流对中间圆柱体和下游圆柱体有较强的冲击作用,对其表面的流体力分布特性有显著的影响。另外,大间距比工况下,当α=0°与L/D≥5.0工况时,柱体群尾流效应强于其间隙流效应。当α=22.5°与L/D=7.0时,位于下游与中间处的圆柱体流体绕流特性存在较大差异。而当α=45°与L/D≥6.0时,位于上游与中间处的圆柱体尾流区均会产生正负交替的漩涡结构。     

Analysis on the effect of salinity in underwater wireless optical communication

Abstract

This article deals with the effect of salinity variation on underwater wireless optical communication (UWOC). Effect of different concentration of salt on underwater optical communication has been carried out experimentally in terms of received power at different link lengths. Based on the analysis of experimental data, a mathematical model has been proposed to describe the saline water channel. A simulation study is performed for different data rates and link lengths. It is seen that with increased salinity the attenuation is higher and the UWOC system performance degrades with higher data rate and increased link length.     

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).     

Monitoring regional sea ice of the Bohai Sea by SSM/I scattering index

ＭｏｎｉｔｏｒｉｎｇｒｅｇｉｏｎａｌｓｅａｉｃｅｏｆｔｈｅＢｏｈａｉＳｅａｂｙＳＳＭ／ＩｓｃａｔｔｅｒｉｎｇｉｎｄｅｘＪｉｎＹａｑｉｕ（ＲｅｃｅｉｖｅｄＪａｎｕａｒｙ６,１９９７;ａｃｃｅｐｔｅｄＭａｒｃｈ３０,１９９７）Ａｂｓｔｒａｃｔ──ＳＳＭ／...     

溢油乳化过程C波段微波散射特性实验研究

本文基于水槽溢油观测实验,研究溢油乳化过程中表面散射特性的变化。利用全极化C波段微波散射计和矢量网络分析仪等测量设备对易发生乳化反应沥青含量小于3%的原油（A型油）、油田中开采出的新鲜原油（B型油）和经过脱水去杂质处理的工业原油（C型油）进行观测。文中详细分析了在C波段微波下乳化油膜与平静水面的后向散射差异,以及油膜乳化过程对后向散射的影响,结果显示在低风速、无浪的条件下（最大波高低于3mm）,原油的乳化反应可通过表面粗糙度和自身介电常数的变化来调制雷达后向散射,并且这两种方式中表面粗糙度的影响占主导地位。对比B型和C型原油在乳化状态和未乳化状态下的表面后向散射,结果显示在各状态下B型油膜表面后向散射均大于C型油,且在VV、HH、HV/VH极化方式下两者后向散射平均差异分别为2.19 dB、2.63 dB、2.21 dB,在20%油膜含水率的乳化状态下差异较未乳化状态时小,平均差异分别为0.98 dB、1.49 dB、1.5 dB,结果表明不同类型油种间由于成分和油膜属性的不同会在一定程度上导致油膜表面粗糙度存在差异,影响油膜表面后向散射。     

南海风暴潮对风场和外围海水敏感性研究

为探索来自西北太平洋台风风暴潮与南海局地生成台风风暴潮不同,本研究在假设两种台风气象条件相同情况下,研究随台风而来外围海水所形成增水对南海沿岸的影响。以0814"黑格比"强台风风暴潮为基础,使用ROMS(regional ocean modeling system)模式进行数值模拟并通过设计对比试验方法进行研究,研究发现在台风登陆时引起的增水最大,最大增水出现在台风路径右侧,其中在沿岸区域,外围海水形成增水约占总增水10%,且大约3 h后出现增水回震现象。同时,设计对比试验,研究来自西北太平洋台风风暴潮对台风路径、台风强度、台风移动速度和流入角等气象条件敏感性,并获得与前人一致的结果。     

基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。     

Improvement in the calculation of anti-Stokes energy transfer and experimental justification based on Er0.01YbxY1 - 0.01 - xVO4 crystal

The improvement on the calculation of anti-Stokes energy transfer rate is studied in the present work. The additional proportion coefficient between Stokes and anti-Stokes light intensities of quantum Raman scattering theory as compared with the classical Raman theory is introduced to successfully describe the anti-Stokes energy transfer. The theoretical formula for the improvement on the calculation of anti-Stokes energy transfer rate is derived for the first time in this study. The correctness of introducing coefficient exp{ΔE / kT} from well-known Raman scatter theory is demonstrated also. Moreover, the experimental lifetime measurement in Er_0.01Yb_xY_{1 - 0.01 - x}VO₄ crystal is performed to justify the validity of our important improvement in the original phonon-assisted energy transfer theory for the first time.     

An interconnect width and spacing optimization model considering scattering effect

As the feature size of the CMOS integrated circuit continues to shrink, the more and more serious scattering effect has a serious impact on interconnection performance, such as delay and bandwidth. Based on the impact of the scattering effect on latency and bandwidth, this paper first presents the quality-factor model which optimises latency and bandwidth effectively with the consideration of the scattering effect. Then we obtain the analytical model of line width and spacing with application of curve-fitting method. The proposed model has been verified and compared based on the nano-scale CMOS technology. This optimisation model algorithm is simple and can be applied to the interconnection system optimal design of nano-scale integrated circuits.     

Brillouin scattering study on elastic and piezoelectric properties of laser irradiated ZnO single crystals

Brillouin light scattering technique can be successfully used to determine the whole set of elastic and piezoelectric constants of a ZnO single crystal irradiated by different laser energy densities, into a micron range (radiation layer thickness). It is found that the scattering intensity, the linewidth and the Brillouin scattering shift of acoustic phonons are all strongly dependent on laser energy density. Based on the sound propagation equations and these results, the directional dependences of the compressional and shear moduli of the irradiated ZnO sample in the (001) plane are investigated. It is found that under an appropriate laser condition, 248 nm KrF excimer laser irradiation can significantly improve the surface quality and increase the elastic properties of ZnO single crystal. This procedure has potential applications in the fabrication of ZnO-based surface acoustic wave and optic-electronic devices.