浅基础地基荷载-变形特性的分析研究

在土体主应力方向的旋转过程中,主应力方向与塑性主应变增量方向之间存在着非共轴现象,非共轴现象对应力-应变关系具有显著的影响。通过有限元二次开发,将角点结构非共轴理论应用到有限元程序ABAQUS中;对密砂单剪试验进行数值模拟,研究了非共轴现象及其对应力-应变关系的影响;采用离心模型试验方法,对圆形浅基础作用下饱和密砂地基荷载-变形特性进行试验研究;对离心模型试验进行数值模拟,将试验结果与数值计算结果进行对比,对非共轴模型的计算结果的合理性进行验证。研究结果表明:非共轴现象对浅基础地基荷载-变形特性具有显著的影响;当选取合理的非共轴塑性模量时,非共轴模型的计算结果与离心模型试验结果比较接近。     

海洋重力仪稳定性测试与零点漂移问题

稳定性指标是海洋重力仪最重要的技术特性之一。针对国内对海洋重力仪稳定性测试与评估重视不够、数据处理过程欠规范、技术指标要求欠细化等现实问题,研究探讨了海洋重力仪稳定性测评的技术流程和数据处理方法,重点分析了环境因素和重力固体潮效应对测试结果的影响,提出了重力仪零点趋势性漂移、有色观测噪声与随机误差的分离方法,建立了比较完善的海洋重力仪稳定性评估指标体系,分析论证并进一步明确了重力仪零点漂移非线性变化的限定指标要求,为修订现行海洋重力测量作业标准提供了可靠的理论依据。     

Dynamic response analysis of a floating mooring system

An innovative floating mooring system with two or more independent floating mooring platforms in the middle and one rigid platform on each side is proposed for improving efficiency and safety in shallow water. For this new system, most of collision energy is absorbed through the displacement of floating platforms. In order to illustrate the validity of the system, a series of model tests were conducted at a scale of 1:40. The coupled motion characteristics of the floating mooring platforms were discussed under regular and irregular waves, and the influences of wave direction and other characteristics on dynamic response of the system were analyzed. The results show that the mooring system is safest at 0° of wave incident angle, whereas the most dangerous mooring state occurs at 90° of wave incident angle. Motion responses increase with the increase of wave height, but are not linearly related to changes in wave height.     

绵阳市度日数特征及其变化趋势分析

从20世纪50年代以来,度日数一直作为气候变化与供暖关系的一个综合评价指标。基于全球变暖可能对我国供暖天数和温度产生深刻的影响,本文采用绵阳市1946~2005年共49年的日最低、最高气温资料,分析了绵阳市度日数年变化特征,并对其进行了趋势分析。结果表明:绵阳市历年供暖度日数最小值处于1998年,比1976年最大值低93.5%,10a年均供暖度日数变化趋势为二次曲线;制冷度日数波动性很大,1960~1979年在1500℃·d左右波动,1979~1990年在1400℃·d左右波动,1990年以后基本处于1500℃·d以上,10a年均制冷度日数拟合趋势曲线为三次曲线。基于Mann-Kendall(M-K)检验法,在α=0.05水平下,对绵阳市供暖和制冷度日数进行检验,研究发现:供暖度日数明显减少,1992年为突变起始年份;制冷度日数波动增长,且自1997年起突变。     

Numerical analysis and centrifuge modeling of shallow foundations

The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results;besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen.     

Tensile stiffness analysis on ocean dynamic power umbilical

Tensile stiffness of ocean dynamic power umbilical is an important design parameter for functional implementation and structural safety. A column with radial stiffness which is wound by helical steel wires is constructed to predict the tensile stiffness value of umbilicals in the paper. The relationship between the tension and axial deformation is expressed analytically so the radial contraction of the column is achieved in the relationship by use of a simple finite element method. With an agreement between the theoretical prediction and the tension test results, the method is proved to be simple and efficient for the estimation of tensile stiffness of the ocean dynamic power umbilical.     

海上试验场潮流能发电装置综合测试与评价方法分析(英文)

开展潮流能装置实海况试验、检测与评价方法研究,对海洋高科技成果的转化、海洋可再生能源开发提供了科学、有效的技术保障。文章通过对潮流能装置的功率输出特性、年发电量、能量转换效率三项核心指标进行分析,提出指标的测试内容和评价方法,为实现潮流能海上试验与测试场建设提供技术依据;并根据对海上风电场的研究,提出了海上试验场潮流能装置的电能质量测试与评估方法;给出潮流能装置安全准入的测试内容,全面评估试验场潮流能装置的运行状态。     

西安地区地裂缝带黄土动力特性试验研究

汾渭盆地是我国乃至世界上地裂缝最为发育,灾害最为严重的地区。考虑到地裂缝灾害对场地条件的影响,尤其是对场地土体的动力特性及动力响应的影响,本文在等压固结条件下,对西安地区地裂缝带黄土进行不同围压下的固结不排水(CU)动三轴试验,获取动力学参数,在此基础上分析了地裂缝带黄土动剪切模量随动剪应变变化特征曲线以及阻尼比随动剪应变变化特征曲线,并对所获得实验曲线进行回归拟合,进而建立了地裂缝带黄土的等效黏弹性动力本构模型,为进一步分析场地土体的动力响应奠定基础。     

中美平板载荷试验规程对比及试验研究

本文通过对比中国标准与美国ASTM标准关于平板载荷试验的规定,总结归纳出两者主要区别在于承压板尺寸和沉降稳定标准,并研究其对试验结果可能产生的影响,提出工程应用中需注意的问题。美国标准通用性较强,具有较大的灵活性,而中国标准相对详细严格。笔者针对博茨瓦纳电厂的平板载荷试验,分别采用中美标准进行试验,试验结果表明:在砂类土等强度较高的地层进行试验,采用中美标准所得到的试验结果相差不明显。本文研究可为我国勘察设计人员进行需采用美标开展平板载荷试验的国外工程提供有价值的参考和解决方案。     

粗粒土大三轴试验研究综述

自然界中广泛分布粗粒土,其具有压实密度大、良好透水性、抗剪强度高、沉降变形小、不易产生地震液化等优良的工程特性,已被广泛运用于土石坝工程建设中。本文在阅读大量参考文献的基础上概括和总结了粗粒土大三轴试验研究进展情况,包括抗剪强度、变形特性、应力-应变关系特性、试验中的若干问题,并结合已有认识,提出了笔者一些自己的思考,指出了今后关于粗粒土的研究方向。