坦桑尼亚林迪地区纳钦圭阿石墨矿床地质特征及找矿模型

坦桑尼亚林迪地区是世界上重要的石墨成矿带,纳钦圭阿石墨矿是成矿带新发现的典型矿床之一。矿区分南北2个矿段,共圈定工业矿体17条,推断石墨矿物资源量>100万t,固定碳平均品位为4.05%。矿体赋存于石墨片岩-片麻岩中,呈层状、透镜状产出,走向北东—北北东,产状与围岩一致,矿体与围岩呈渐变过渡关系。矿石类型为石墨片岩-片麻岩型,矿石矿物为鳞片状石墨,脉石矿物主要为石英、长石、云母及少量金属矿物。矿石中片度≥147 μm（+100目）的石墨占94.43%,工业类型为大鳞片晶质石墨矿石。以视极化率6%为异常下限,共圈定4处激电异常,高极化率异常与低电阻率异常对应良好,探矿工程确定为矿体出露位置。该石墨矿的找矿模型：新元古代莫桑比克活动带中一套中高级副变质岩系为区域找矿标志,石墨片岩、石墨片麻岩露头为矿区找矿的直接标志,延伸方向与地层走向一致的条带状低阻、高极化异常带为地球物理找矿标志。该石墨矿的地质特征及找矿模型可作为在坦桑尼亚寻找同类矿床的参考。     

南秦岭柞山地区铅银锌矿成矿规律及找矿模型

南秦岭柞水银洞子—山阳桐木沟铅银锌矿带地处陕西柞山地区中部,位于中秦岭晚古生代弧前盆地的柞水—山阳矿集区内。该带东西长约71 km,南北宽1～7 km。对带内银洞子（铜）铅银菱铁矿床、黑沟铅锌菱铁矿床、桐木沟锌矿床、南沟（银）铅矿床和松林沟铅矿点的地质、矿体、蚀变、矿化规律进行总结,发现矿体均严格产于中-上泥盆统青石垭组,具有明显的时控、层控、岩控及后期热液改造成矿特征,属典型的海底热水喷流沉积-热液改造层控矿床,构成与晚古生代海底热水喷流沉积-热液改造作用有关的铅锌银成矿系列。建立以层控+热液改造为主控矿条件,以青石垭组热水沉积岩+断裂+化探异常+硫化物、重晶石、菱铁矿蚀变分带为组合的找矿模型,对柞山地区金属矿的找矿突破具有重要的指导意义。     

四川会理拉拉铜矿找矿预测模型构建与找矿示范

勘查区找矿预测理论与方法体系是基于全国129个典型矿床的深入研究,以及在勘查项目实践验证基础上总结而形成的一种特别适合生产找矿第一线使用的有效方法。该方法以成矿作用内因(元素的地球化学特征)和外因(地质作用类型)相结合的思路,构建以成矿地质体、成矿构造与成矿结构面和成矿作用特征标志为主要内容的找矿预测地质模型。四川会理地区位于扬子板块西缘,区域成矿地质条件优越,经历多期构造事件叠加,形成了一系列独具特色的铁铜矿床。近年来,在拉拉铜矿的深部及外围已取得了重大找矿突破和进展。本文以会理拉拉铜矿为典型实例及深部找矿预测成果示范,阐述该方法在深部找矿预测中的具体应用过程,得出了如下认识:早期成矿地质体为赋矿火山岩(河口群钠长岩类),成矿构造与成矿结构面主要为基(中)性火山岩与沉积岩的界面及可能的喷溢口;热液叠加期成矿地质体推测为深部隐伏岩体,成矿构造与成矿结构面主要为褶皱、断裂和裂隙。在总结成矿作用特征标志基础上,建立了拉拉铜矿勘查区找矿预测地质模型。通过与地质和物探方法相结合,圈定红泥坡南部为找矿靶区,经钻探验证,发现厚大矿体,打开了区域找矿空间。     

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.     

衡水地区地裂缝空间发育特征与地下水位降深关系

通过浅层地震法及高密度电阻率法物探对河北衡水地区最近发现的3条地裂缝调查,探明了地裂缝地下发育深度、宽度、倾向等,发现地裂缝在地表与地下发育特征有明显不同：地表以一条地裂缝存在,在地下深处则以裂缝带发育,裂缝带两侧裂缝埋深不同,地下裂缝形态表现为上窄下宽。对该地区深层钻探、水文地质和多年地下水开采等资料分析表明,该地区的地裂缝是地质历史时期地质构造活动产物,开采深层地下水等资源则是促使地裂缝发展的主要原因。通过对不同地点地裂缝发育深度与近36年以来地下水水位降深的关系分析,结果显示：不同地区地裂缝发育深度与相应深层地下水水位降深呈线性关系。研究成果对地裂缝机理研究及预防开采深层地下水对地质环境的影响具有指导作用。     

综合物探方法在堤防质量检测中的应用

在堤防质量检测中,地球物理方法能够实现快速、无损的探测,但采用单一物探方法对堤防隐患的判别易形成多解,也很难对堤防质量做出准确分类.本文中应用探地雷达、高密度电法、地震勘探等综合物探方法对大源渡堤防质量进行检测,并以龙荫港以例,通过综合三种物探方法互相参照、相互验证,互为补充,查明了堤防隐患的分布位置与埋深,为堤防质量检测提供一种新的工作方法.     

白云鄂博矿床东矿段深部及白云向斜核部探矿的可行性探讨

白云鄂博东矿（铁矿石）已属于轻度危机矿山,解决白云鄂博东矿的资源接续问题已迫在眉睫。依据老地质资料和生产过程中的新发现,参考多位矿床成因研究专家的成果,笔者等认为在白云鄂博东矿体深部及白云向斜核部探矿是可行的。     

李清地铅锌银矿区成矿地质特征及找矿新进展

李清地铅锌银矿区,是一个勘查多年的老矿区,通过资料的重新开发,按照新的找矿思路,配合有效的勘查方法,发现了新的北西向隐伏Pb、Zn、Ag、Au富厚矿体,取得了找矿实质性进展,使老矿区的找矿重现生机.     

松潘-摩天岭金成矿带控矿特征及找矿标志

松潘-摩天岭金成矿带位于川、陕、甘三省交界处,阳山金矿是近年在该成矿带上发现的一超大型岩金矿床.对其地质特征研究表明,除受构造控制外,岩浆岩、地层对矿床也有一定的控制作用,属浅成低温热液蚀变岩型金矿床.下一步找矿主要利用地物化遥等手段进行综合找矿,逐步解剖Ⅰ级-Ⅱ级-Ⅲ级远景区,寻找有望靶区,在找矿思路上要从矿床类型上突破,优选次序是破碎蚀变岩型-微细浸染型-石英脉型,应加强对含矿构造安昌河-观音坝主破碎蚀变带,尤其要加强其南北两侧及深部的研究和勘查.     

广西来宾市北敢堆积型铝土矿地质特征及找矿标志

在分析研究区域成矿地质背景、矿床地质特征的基础上,对矿床成因进行了初步探讨,总结了找矿标志.认为矿源层来自上二叠统合山组底部与中二叠统茅口组顶部的古侵蚀间断面上的原生铁铝岩(铝土矿);成矿过程经历了原生铁铝岩的形成、初始堆积铝土矿的形成和改造富集成矿三个阶段后再次遭受风化、剥蚀、搬运和堆积,最终堆积型铝土矿在岩溶坡地和...