Levels of organochlorine pesticide residues in some organs of the Ganges perch, Lates calcarifer, from the Ganges-Brahmaputra-Meghna Estuary, Bangladesh

Levels of organochlorine pesticide residues (p,p′ DDT, DDD, DDE, Aldrin, Dieldrin, Lindane, Heptachlor and BHC) were analysed in the dry and wet seasons in four organs (muscle, liver, gut and egg samples) of Ganges Perch, Lates calcarifer, collected during October–November–December, 1996 and May–June–July, 1997 from the Ganges–Brahmaputtra–Meghna estuary. The residues were analysed by using gas-chromatography (GC) in electron capture detector (ECD) mode and were verified by thin layer chromatography (TLC). Among the four organs analysed, the residues were found in the order egg > gut > muscle > liver. The pesticide residues were found in the order ∑DDT > Heptachlor >Dieldrin > Aldrin. Higher levels of residues were found during the dry season due to high lipid content in fishes. A positive correlation was observed between the pesticide residues (∑DDT and ∑OCs) and lipid contents of fish, and the correlation was found to be linear. The concentrations of pesticide residues in muscle, liver and gut were below the FAO/WHO (1993) recommended permissible limit except in eggs.     

从已发现的油气田看中国海相油气勘探

中国海相油气勘探的主要目标是古生界碳酸盐岩,在漫长的演化历程中它的主要成藏类型是准原生型。对形成保存至今的工业油气藏来说,碳酸盐岩中有效烃源岩的总有机碳含量下限应≥0.5%,滨海相或海陆交互相煤系可对生烃作出重大贡献。碳酸盐岩中的储集体受裂缝—岩溶发育程度的控制而分为三种基本类型:(1)以孤立的缝洞储集体为主者称纳溪型,各储集体内的流体性质、压力均可有不同;(2)各储集体间相互连通从而有统一的压力和气、油、水界面,若其似块状者称任丘型,若其似层状者则称威远型;(3)居于这两个端元间的过渡类型为塔河型,其各部分之间的流体性质和压力可有一定差别,无统一油水界面。应注意对似层状储集体的勘探研究,保存条件的好坏对海相油气田有决定性的意义。在分析复杂的多期成藏史中,要注意古隆起和晚期成藏的辩证关系。我国的海相油气勘探有难度,要重新评价有效和高效烃源岩,从较浅部和次生油气蒇入手逼近油气源,寻找主力油气藏,要重视岩性圈闭和各构造(形变)层间的不吻合性。中国的海相油气勘探方向可分为优先勘探、立争突破、劣中选优三个层次。     

中国古生界海相地层油气勘探

影响中国古生界海相油气勘探并且需要加强研究的主要问题是:保存条件的认识与有利区预测;有效烃源岩与资源潜力;储层的复杂性及其对非构造圈闭的影响。保存条件分为三个层次:含油气盆地的保存、含油气系统的保存、油气藏的保存。塔里木、四川、鄂尔多斯三大克拉通盆地是中国古生界保存较好的盆地,是海相油气勘探的战略目标区,另外还有准噶尔、楚雄等盆地。盆地斜坡相泥岩及泥状灰岩是海相油气勘探的主要烃源;海陆过渡相烃源岩发育区是重要战略方向;陆表海碳酸盐岩烃源岩区是中小油气田勘探领域。从储层条件来说,下古生界应以非砂岩岩溶储层为主要勘探对象,溶蚀不整合面广泛发育,已发现的下古生界大中型油气田仅见于碳酸盐岩溶储层;上古生界以孔隙性碎屑岩及碳酸盐岩储层为主要勘探对象,晚古生代的构造一古地理演化为这两类储层的广泛发育提供了条件。     

The effects of surface area, grain size and mineralogy on organic matter sedimentation and preservation across the modern Squamish Delta, British Columbia: the potential role of sediment surface area in the formation of petroleum source rocks

Surface sediment samples were collected from the Squamish River Delta, British Columbia, in order to determine the role of sediment surface area in the preservation of organic matter (OM) in a paralic sedimentary environment. The Squamish Delta is an actively prograding delta, located at the head of Howe Sound.Bulk total organic carbon (TOC) values across the Squamish Delta are low, ranging from 0.1 to 1.0 wt.%. The carbon/total nitrogen ratio (C_org/N) ranges from 6 to 17, which is attributed to changes in OM type and facies variations. The <25-μm fraction has TOC concentrations up to 2.0 wt.%, and a C_org/N ratio that ranges from 14 to 16. The 53–106-μm fraction has higher TOC concentrations and C_org/N ratios relative to the 25–53-μm fraction. The C_org/N ratio ranges from 9 to 18 in the 53–106-μm fraction and 5.5–10.5 in the 25–53-μm fraction. Surface area values for bulk sediments are low (0.5–3.0 m²/g) due to the large proportion of silt size material. Good correlation between surface area and TOC in bulk samples suggests that OM is adsorbed to mineral surfaces. Similar relationships between surface area and TOC were observed in size-fractionated samples. Mineralogy and elemental composition did not correlate with TOC concentration.The relationships between surface area, TOC and total nitrogen (TN) can be linked to the hydrodynamic and sedimentological conditions of the Squamish Delta. As a result, the Squamish Delta is a useful modern analogue for the formation of petroleum source rocks in ancient deltaic environments, where TOC concentrations are often significantly lower than those in source rocks formed in other geological settings.     

Petroleum inclusions in sedimentary basins: systematics, analytical methods and applications

Fluid dynamics in sedimentary basins is of tremendous interest, both from a scientific and an economic point of view. Integration between fluid inclusion and present-day fluid data provides the time aspect necessary for reconstruction of fluid flow paths, and can be used for mapping fluid dynamics both on a regional basin scale or on the more local scale of petroleum reservoirs. This paper presents a review of analytical and modelling methods for petroleum in fluid inclusions. Essentially, four types of data for petroleum inclusions can be established through analysis and modelling: (1) textures (which give indirect information of the time aspect), (2) fluid composition, (3) fluid properties and (4) pressure–temperature of trapping. During the last decade, development of analytical methods for determination of inclusion fluid compositions has taken place. Traditional correlation studies for characterisation of maturity and source facies may now therefore include fluid inclusion data. The development has also been directed towards an improved understanding of the physical properties of petroleum inclusions. Although these methods are in their early stages concerning precision and accuracy, data necessary for fluid flow modelling, such as fluid densities, viscosities, pressure and temperature, can be estimated.     

Cold seep deposits of Beauvoisin (Oxfordian; southeastern France) and Marmorito (Miocene; northern Italy): microbially induced authigenic carbonates

The relation of two well-known ancient carbonate deposits to hydrocarbon seepage was confirmed by this study. Archaea are found to be associated with the formation of Oxfordian seep carbonates from Beauvoisin and with a Miocene limestone from Marmorito ("tube-worm limestone"). Carbonates formed due to a mediation by archaea exhibit extremely positive or extremely negative δ¹³C_carbonate values, respectively. Highly positive values (+15‰) reflect the use of ¹³C-enriched CO₂ produced by methanogenesis. Low δ¹³C values of the Marmorito carbonates (–30‰) indicate the oxidation of seepage-derived hydrocarbons. Likewise, the δ¹³C content of specific tail-to-tail linked isoprenoids, biomarkers for archaea, was found to be strikingly depleted in these samples (as low as –115‰). The isotopic signatures corroborate that archaea were involved in the cycling of seepage-derived organic carbon at the ancient localities. Another Miocene limestone ("Marmorito limestone") shows a strong imprint of methanotrophic bacteria as indicated by δ¹³C values of carbonate as low as –40‰ and biomarker evidence. Epifluorescence microscopy and field-emission scanning electron microscopy revealed that bacterial biofilms were involved in carbonate aggregation. In addition to lucinid bivalves previously reported from both localities, we infer that sponges from Beauvoisin and tube worms from Marmorito depended on chemosynthesis as well. Low δ¹³C values of nodules related to sponge taphonomy (–27‰) indicate that sponges might have been linked to an enhanced hydrocarbon oxidation. Tube worm fossils from Marmorito closely resemble chemosynthetic pogonophoran tube worms from Recent cold seeps and are embedded in isotopically light carbonate (δ¹³C –30‰). Received: 13 October 1998 / Accepted: 5 February 1999     

Meso-scale testing and development of test procedures to maintain mass balance

The Conrad Blucher Institute for Surveying and Science (Texas A&M University––Corpus Christi) has conducted numerous petroleum experiments at the Shoreline Environmental Research Facility (Corpus Christi, Texas, USA). The meso-scale facility has multiple wave tanks, permitting some control in experimental design of the investigations, but allowing for real-world conditions. This paper outlines the evolution of a materials balance approach in conducting petroleum experiments at the facility. The first attempt at a materials balance was during a 1998 study on the fate/effects of dispersant use on crude oil. Both water column and beach sediment samples were collected. For the materials balance, the defined environmental compartments for oil accumulation were sediments, water column, and the water surface, while the discharge from the tanks was presumed to be the primary sink. The “lessons learned” included a need to quantify oil adhesion to the tank surfaces. This was resolved by adhering strips of the polymer tank lining to the tank sides that could be later removed and extracted for oil. Also, a protocol was needed to quantify any floating oil on the water surface. A water surface (oil slick) quantification protocol was developed, involving the use of solid-phase extraction disks. This protocol was first tested during a shoreline cleaner experiment, and later refined in subsequent dispersant effectiveness studies. The effectiveness tests were designed to simulate shallow embayments which created the need for additional adjustments in the tanks. Since dispersant efficacy is largely affected by hydrodynamics, it was necessary to scale the hydrodynamic conditions of the tanks to those expected in our prototype system (Corpus Christi Bay, Texas). The use of a scaled model permits the experiment to be reproduced and/or evaluated under different conditions. To minimize wave reflection in the tank, a parabolic wave dissipater was built. In terms of materials balance, this design reduced available surface area as a sink for oil adsorption.     

Evaluation of remedial alternatives for a petroleum contaminated unconfined aquifer with fluctuating groundwater level

This study evaluated remedial alternatives for a petroleum-contaminated site where an unconfined aquifer composed of a sandy layer of about 3–3.5 m thickness is covered by alluvial deposits and reclaimed soil of about 1.5 m thickness. Precambrian gneiss, of low permeability, lies below the sandy layer. The shallow water table is about 3 m below the surface, but shows high fluctuations of up to 1.5 m in response to precipitation events. The unsaturated soil near the water table and the groundwater are highly contaminated with petroleum hydrocarbons, especially toluene, which have apparently leaked from storage tanks. Selection of the remedial alternatives required consideration of the relevant laws on soil and groundwater conservation in Korea, the results of risk analysis and the hydrogeological conditions. The contaminated area has been divided into zones in which different remediation goals are set based on risk analysis and the degree of natural attenuation. It is estimated that the clean-up goal can be achieved in two years by the combined use of a trench drain and well point pumping to collect the contaminated groundwater for treatment, and a dual air injection system for the contaminated soil.     

EROD activity, serum SDH and PAH biliary metabolites in sand flathead (Platycephalus bassensis) collected in Port Phillip Bay, Australia

In order to evaluate the health status of fish inhabiting Port Phillip Bay, Australia, southern sand flathead (Platycephalus hassensis, N = 133) were collected at six stations throughout the Bay. Fish had a similar serum sorbitol dehydrogenase (SDH) activity level (p = 0.12), indicating that they were not experiencing hepatocellular injuries. Ethoxyresorufin-O-deethylase (EROD) activity was generally lower in the non-urbanized and non-industrialized southern part of the Bay. The highest EROD activity was observed in Hobson Bay, the closest station from Melbourne city. Naphthalene-type biliary metabolites were also highest in Hobson Bay with intermediate levels found in Corio Bay where refineries are present. An opposite trend was observed with the pyrene-type bile metabolites, the highest levels being observed in Corio Bay while intermediate levels were found in Hobson Bay. The ratio of naphthalene-type to benzo(a)pyrene (B(a)P)-type metabolites indicate that relatively to other sites sampled in Port Phillip Bay, Corio Bay is subjected to enriched petroleum hydrocarbons of pyrolytic origin. Temporal trends indicate that the availability of xenobiotics to fish remained unchanged over the 1990s.     

Application of the luciferase cell culture bioassay for the detection of refined petroleum products

A luciferase cell culture-based bioassay, developed to detect 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD)-like activity of halo-genated and polycyclic aromatic hydrocarbons, was optimized to detect refined petroleum products and to determine their relative inducing potency. Quality control standards from 32 refined products (gasolines and diesels, jet fuels, lubricating oils, fuel oils and weathered products) and three commercial products were evaluated. Induction equivalents (I-EQs) were determined by direct comparison of the EC50 and EC20 values (based on the median and 20% TCDD maximal response, respectively) from dose-response curves for each product to those obtained with TCDD. Most petroleum products were active in the luciferase bioassay, with those products composed of fractions produced later in the distillation process (i.e. fuel oils) inducing higher levels. Additionally, weathering of products reduced their induction potency. Based on the high I-EQ estimates of many products, biological effects associated with exposure may have been previously underestimated using other diagnostic methods.