Detrital zircon ages in Palaeozoic and Mesozoic basement assemblages of the Peninsular Ranges batholith,Baja California,Mexico: constraints for depositional ages and provenance

The origin and continuity of Phanerozoic lithostratigraphic terranes in southern and Baja California remain an unsolved issue in Cordilleran tectonics. We present data from eight detrital zircon samples collected across the southern extent of the Peninsular Ranges that help constrain the provenance of detritus and the depositional ages of these basement units. Detrital zircon signatures from units in the eastern Peninsular Ranges correlate with Palaeozoic passive margin assemblages in the southwestern North American Cordillera. Units in the central belt, which consists of Triassic–Jurassic metasedimentary turbidite assemblages that probably deformed in an accretionary prism setting, and Cretaceous metasedimentary and metavolcanic units that represent the remnants of a continental margin arc, were derived from both proximal and more distal sources. The westernmost units, which are locally structurally interleaved with the Triassic through Cretaceous units of the central belt, are Cretaceous deposits that represent a series of collapsed basin complexes located within and flanking the Cretaceous Alisitos volcanic island arc. Cretaceous intra-arc units show little influx of cratonal material until approximately 110 Ma, whereas coeval sediments on the northern and eastern flanks of the Alisitos arc contain abundant cratonal detritus. Intra-arc strata younger than approximately 110 Ma contain large amounts of Proterozoic and older detrital zircons. These data suggest that basins associated with the Alisitos arc were either too distant or somehow shielded from North American detritus before 110 Ma. In the case of the former, increased influx of continental detritus after 110 Ma would support a tectonic model in which the arc was separated from North America by an ocean basin and, as the arc approached the continent, associated depositional centres were close enough to receive input from continental sources.     

Relationships between deformation and partial melting in the Palmer migmatites,South Australia

The migmatites of the Palmer area, in the core of the Mt Lofty Ranges metamorphic belt, are considered to have formed by partial melting of quartzo‐feldspathic schists and gneisses, rather than by metamorphic segregation as formerly suggested. Large‐ and small‐scale tectonic structures indicate that the Cambrian Kanmantoo Group rocks in the Palmer area have undergone three deformations during the Delamerian Orogeny and that these are similar to those described elsewhere in the Mt Lofty Ranges. The relationships of the migmatitic veins to these structures indicate that some partial melt was present during a large part of the structural history: some veins formed before and after the first folding event, and some formed during or after the third folding event even though the metamorphic grade appears to have been waning in areas more distant from the highest grade ore. The early onset of partial melting is consistent with previously reported evidence that thermal activity in the belt began before penetrative deformation.     

Post Late Paleozoic tectonism in the southern Catalan Coastal Ranges (NE Spain), assessed by apatite fission track analysis

We report the first apatite fission-track thermochronologic data for 17 samples from the southern Catalan Coastal Ranges of NE Spain. Thermal histories of Carboniferous metasediments, Late Hercynian intrusions and Lower-Triassic Buntsandstein sediments from three tectonic blocks, Miramar, Prades and Priorat, are derived and interpreted within the geodynamic framework and tectonic evolution of the region. The apatite fission-track ages range from 198±24 to 38±5 Ma and mean fission-track lengths are all <13.3 μm. Samples throughout the study area underwent total track annealing during the Late Hercynian magmatic episode, followed by fast cooling prior to the deposition of Lower Triassic sediments. The Lower Triassic sediments and basement rocks underwent a temperature increase during a first Mesozoic rift phase in Middle Triassic–Early Jurassic times resulting in the complete or near complete annealing of the fission-tracks. During a second Mesozoic rifting stage, in Late Jurassic to Early Cretaceous time, differential tectonic block activity is observed in the three studied tectonic blocks. Subsequently, during Late Cretaceous a long-period of thermal stability, detected in all samples, is related to the post-rift episode. The onset of fast cooling registered in the apatite fission track system during Paleogene times is related to the Pyrenean orogeny. Compressional forces associated with the ongoing southern migration of the convergence forces at the Iberian plate boundaries caused unroofing of about 2–3 km of material of the Prades and northwestern flank of the Priorat block. Extensional collapse in Late Oligocene–Miocene related to the Western Mediterranean rifting triggered the denudation of about 2 km of material from the southeastern flank of the Miramar, Prades and Priorat blocks.     

Occurrence of Bindheimite in North‐West Queensland

Bindheimite has been identified in specimens from the Lvov Lease, N.W. Queensland. Chemical, microscopic and X‐ray data are given for the mineral which was found to possess a cubic lattice with a unit cell dimension of 10–427 A.     

The geometry and timing of orogenic extension: an example from the Western Italian Alps

Contacts between rocks recording large differences in metamorphic grade are indicative of major tectonic displacements. Low-P upon high-P contacts are commonly interpreted as extensional (i.e. material points on either side of the contact moved apart relative to the palaeo-horizontal), but dating of deformation and metamorphism is essential in testing such models. In the Western Alps, the Piemonte Ophiolite consists of eclogites (T ≈550–600 °C and P≈18–20 kbar) structurally beneath greenschist facies rocks (T ≈400 °C and P≈9 kbar). Mapping shows that the latter form a kilometre-wide shear zone (the Gressoney Shear Zone, GSZ) dominated by top-SE movement related to crustal extension. Rb–Sr data from micas within different GSZ fabrics, which dynamically recrystallized below their blocking temperature, are interpreted as deformation ages. Ages from different samples within the same fabric are reproducible and are consistent with the relative chronology derived from mapping. They show that the GSZ had an extensional deformation history over a period of c. 9 Myr between c. 45–36 Ma. This overlaps in time with the eclogite facies metamorphism. The GSZ operated over the entire period during which the footwall evolved from eclogite to greenschist facies and was therefore responsible for eclogite exhumation. The discrete contact zone between eclogite and greenschist facies rocks is the last active part of the GSZ and truncates greenschist facies folds in the footwall. These final movements were therefore not a major component of eclogite exhumation. Pressure estimates associated with old and young fabrics within the GSZ are comparable, indicating that during extensional deformation there was no significant unroofing of the hangingwall. Since there are no known extensional structures younger than 36 Ma at higher levels in this part of the Alps, exhumation since the final juxtaposition of the two units (at 36 Ma) seems to have been dominated by erosion. Key words: deformation age, eclogite, exhumation, Rb–Sr dating, tectonic.     

大兴安岭北段嘎拉山伸展滑脱构造

嘎拉山大型伸展滑脱构造发育在大兴安岭北段东坡,带内发育倾向SE的剪切面理,普遍发育层间揉皱、眼球状构造、低角度正断层、鞘褶皱和窗棂构造以及云母鱼、旋转残斑、石英条带等各种韧性变形显微组构,变形温度为300～400 ℃。各种宏观和微观不对称褶皱和线理等指向标志显示嘎拉山伸展构造为一指向SE的伸展滑脱构造。通过对剪切变形带中的花岗质片麻岩和大理岩的白云母⁴⁰Ar/³⁹Ar同位素测年获得144～147 Ma的坪年龄,该年龄代表了伸展剪切变形的形成时间。结合区域上变质核杂岩的研究,认为嘎拉山伸展构造的形成机制很可能与鄂霍茨克造山运动使地壳加厚崩塌,导致大兴安岭地区发生区域性伸展有关。     

The tectonic history of Adelaide’s scarp-forming faults

A series of linear to arcuate fault scarps separate the Mount Lofty Ranges from the Cenozoic St Vincent and Murray basins of South Australia. Their tectonic, sedimentary and geomorphic evolution is traced from the oldest rock record through to present-day seismicity. The scarps are the latest manifestation of repeated compressive reactivation of ancient, deep-seated crustal faults and fractures whenever the stress field was of appropriate orientation. Formation of the basins and uplift of the ranges resulted from the same processes of repeated compressive reactivation. Continental crust was intensely fractured during three episodes of Neoproterozoic–Cambrian rifting that led to the formation of the Adelaide Geosyncline and break-up of Rodinia. Neoproterozoic eastward-dipping, listric extensional faults provided accommodation space for deposition of the Burra Group. Sediments of the Umberatana and Wilpena groups were deposited under mainly sag-phase conditions. In the early Cambrian, new extensional faults formed the deeply subsident Kanmantoo Trough. Cambrian rift faults swung from east–west on Kangaroo Island through northeasterly on Fleurieu Peninsula to north–south in the easten Mount Lofty Ranges, cutting across the older meridional rifts. These two sets of extensional faults were reactivated as basement-rooted thrusts in the ensuing Delamerian Orogeny. The Willunga Fault originated as a Cambrian rift fault and was reactivated in the Delamerian Orogeny as a thrust dipping southeast under a regional basement-cored antiform on southern Fleurieu Peninsula. Much of southern Australia, including the eroded remnants of the Delamerian highlands, was covered by a continental ice sheet in the Carboniferous–Permian. The preferential preservation of glacial sediments on Fleurieu Peninsula may have resulted from extensional reactivation of the Willunga Fault, possibly in the early Mesozoic. Fleurieu Peninsula was then warped into an open, southwest-plunging antiform, spatially coincident with the much higher amplitude Delamerian antiform. Glacial sediments were eroded from uplifted (up-plunge) areas before formation of a ‘summit surface’ across deeply weathered bedrock and preserved glacial sediments in the later Mesozoic. This surface was covered with fluvial to lacustrine sediments in the middle Eocene. Neotectonic movements under a renewed compressive regime commenced with reactivation of the Willunga Fault, restricting subsequent Eocene to Miocene sedimentation to the St Vincent Basin. The Willunga scarp was onlapped in the Oligocene–Miocene concomitant with continuing uplift and formation of a hanging-wall antiform. In the late Cenozoic, repeated faulting and mild folding, angular unconformities, ferruginisation and proximal coarse sedimentation took place on various faults at different times until the late Pleistocene.     

Foldbelts with early salt withdrawal and diapirism: Physical model and examples from the northern Gulf of Mexico and the Flinders Ranges, Australia

A physical experiment shows that shortening applied to existing diapirs and minibasins produces anomalous structural styles that are unlike those of more typical foldbelts. Strong minibasins remain largely undeformed while weak diapirs localize contractional strain. Short diapirs form the cores to folds and thrusted folds, whereas tall diapirs are squeezed and often welded, commonly leading to the extrusion of allochthonous material. Key features of the model are observed in real examples. In the northern Gulf of Mexico passive margin, minibasins were originally separated by a polygonal pattern of deep salt ridges, with diapirs located at ridge intersections. Gravity spreading resulted in squeezed diapirs (and associated allochthonous salt) connected by variably oriented contractional, extensional, and strike-slip structures. In the Flinders Ranges convergent-margin foldbelt of South Australia, preexisting diapirs were squeezed, welded, and thrusted, with anticlines plunging away in multiple directions, so that minibasins are surrounded by highly variable structures. A different geometry is observed in La Popa Basin, Mexico, where squeezing of a linear salt wall produced a vertical weld with diapirs at the terminations, rather than the culmination. In all areas, foldbelt geometries are strongly influenced by the preestablished salt-minibasin architecture.     

On the origin of multi‐layer coronas between olivine and plagioclase at the gabbro–granulite transition,Valle Fértil–La Huerta Ranges,San Juan Province,Argentina

Troctolitic gabbros from Valle Fértil and La Huerta Ranges, San Juan Province, NW‐Argentina exhibit multi‐layer corona textures between cumulus olivine and plagioclase. The corona mineral sequence, which varies in the total thickness from 0.5 to 1 mm, comprises either an anhydrous corona type I with olivine|orthopyroxene|clinopyroxene+spinel symplectite|plagioclase or a hydrous corona type II with olivine|orthopyroxene|amphibole|amphibole+spinel symplectite|plagioclase. The anhydrous corona type I formed by metamorphic replacement of primary olivine and plagioclase, in the absence of any fluid/melt phase at <840 °C. Diffusion controlled metamorphic solid‐state replacement is mainly governed by the chemical potential gradients at the interface of reactant olivine and plagioclase and orthopyroxene and plagioclase. Thus, the thermodynamic incompatibility of the reactant minerals at the gabbro–granulite transition and the phase equilibria of the coronitic assemblage during subsequent cooling were modelled using quantitative μMgO–μCaO phase diagrams. Mineral reaction textures of the anhydrous corona type I indicate an inward migration of orthopyroxene on the expense of olivine, while clinopyroxene+spinel symplectite grows outward to replace plagioclase. Mineral textures of the hydrous corona type II indicate the presence of an interstitial liquid trapped between cumulus olivine and plagioclase that reacts with olivine to produce a rim of peritectic orthopyroxene around olivine. Two amphibole types are distinguished: an inclusion free, brownish amphibole I is enriched in trace elements and REEs relative to green amphibole II. Amphibole I evolves from an intercumulus liquid between peritectic orthopyroxene and plagioclase. Discrete layers of green amphibole II occur as inclusion‐free rims and amphibole II+spinel symplectites. Mineral textures and geochemical patterns indicate a metamorphic origin for amphibole II, where orthopyroxene was replaced to form an inner inclusion‐free amphibole II layer, while clinopyroxene and plagioclase were replaced to form an outer amphibole+spinel symplectite layer, at <770 °C. Calculation of the possible net reactions by considering NCKFMASH components indicates that the layer bulk composition cannot be modelled as a ‘closed’ system although in all cases the gain and loss of elements within the multi‐layer coronas (except H₂O, Na₂O) is very small and the main uncertainties may arise from slight chemical zoning of the respective minerals. Local oxidizing conditions led to the formation of orthopyroxene+magnetite symplectite enveloping and/or replacing olivine. The sequence of corona reaction textures indicates a counter clockwise P–T path at the gabbro–granulite transition at 5–6.5 kbar and temperatures below 900 °C.     

大兴安岭中生代花岗岩类的地球化学

大兴安岭中生代花岗岩根据微量元素地球化学特征划分为高锶花岗岩类和低锶花岗岩类,前者富集Ba、Sr、Ti,而后者强烈亏损这些元素而富集大离子亲石元素和高场强元素。高锶花岗岩类主要由石英闪长岩、英云闪长岩和花岗闪长岩组成,属于Ⅰ型花岗岩;低锶花岗岩类由二长花岗岩、正长花岗岩、碱长花岗岩和碱性花岗岩组成,二长花岗岩一正长花岗岩一碱长花岗岩也属于Ⅰ型花岗岩,碱性花岗岩为A1型花岗岩。这两类花岗岩均显示εNd(t)正值^87Sr／^86Sr低值以及较低的Nd模式年龄。高锶与低锶花岗岩类地球化学差异性表明,高锶花岗岩起源于相对亏损的幔源岩浆的分异作用,而低锶花岗岩类的源区与显生宙地壳增生时期起源于地幔的年轻地壳物质有关,即起源于富集型幔源基性岩石的部分熔融。大兴安岭中生代花岗岩与流纹岩之间地球化学相似性以及与玄武岩类的相关性表明,它们是统一的构造一岩浆体系的产物,共同制约于古亚洲洋闭合后的大陆伸展的构造环境和闭合期间壳幔相互作用形成的地幔源区。