Thermodynamic Modelling of Ore-Forming Mechanism of the Changkeng Gold-Silver Deposits in Guangdong Province

The Changkeng gold-silver deposits consist of a sediment-hosted, disseminated gold deposit and a replacement-type silver deposit. The mineralizations of gold and silver are zoned and closely related to the silicification of carbonate and clastic rocks, so that siliceous ores dominate in the deposit. The mineralizing temperature ranges mainly from 300 to 170℃, and K+, Na+, Ca2+, Mg2+, and Cl- are the major ions in the ore-forming fluid. Calculations of distribution of metal complexes show that gold is mainly transported by hydrosulphide complexes, but chloride complexes of silver, iron, lead, and zinc, which are transformed into hydroxyl and hydrosulphide complexes under neutral to weak-alkaline circumstances in the late stage, predominate in the ore-forming solutions. Water-rock interaction is confirmed to be the effective mechanism for the formation of silver ores by computer modelling of reaction of hydrothermal solution with carbonate rocks. The solubility analyses demonstrate that the precipitation     

Countergradient Fluxes of Conserved Variables in the Clear convective and Stratocumulus-topped Boundary Layer: The role of the Entrainment Flux

Large-eddy simulations of a clear convective boundary layer (CBL)and a stratocumulus-topped boundary layer are studied. Bottom-upand a top-down scalars were included in the simulations, and theprinciple of linear superposition of variables was applied toreconstruct the fields of any arbitrary conserved variable.This approach allows a systematic analysis of countergradient fluxesas a function of the flux ratio, which is defined as the ratio betweenthe entrainment flux and the surface flux of the conserved quantity.In general, the turbulent flux of an arbitrary conserved quantityis counter to the mean vertical gradient if the heights where thevertical flux and the mean vertical gradient change sign do notcoincide. The regime where the flux is countergradient is thereforebounded by the so-called zero-flux and zero-gradient heights. Becausethe vertical flux changes sign only if the entrainment flux has anopposite sign to the surface flux, countergradient fluxes arepredominantly found for negative flux ratios. In the CBL the fluxratio for the virtual potential temperature is, to a good approximation,constant, and equal to -0.2. Only if the moisture contribution to thevirtual potential temperature is negligibly small will the flux ratio forthe potential temperature be equal to this value. Otherwise, theflux ratio for the potential temperature can have any arbitrary(negative) value, and, as a consequence, the fluxes for thepotential temperature and the virtual potential temperature willbe countergradient at different heights. As a practical application ofthe results, vertical profiles of the countergradient correction termfor different entrainment-to-surface-flux ratios are discussed.     

Bedload transport resistance in rough open‐channel flows

During bedload movement by saltation, streamwise momentum is transferred from the ?ow to the saltating grains. When the grains collide with other grains on the bed or in the ?ow, streamwise momentum is reduced, and there is a decrease in streamwise ?ow velocity and an increase in ?ow resistance, herein termed bedload transport resistance f_bt. Based on experiments in two ?umes with ?xed and mobile plane beds and previously published data, an equation is developed that may be used to predict f_bt for both capacity and non‐capacity ?ows. The variables in this equation are identi?ed by dimensional analysis and the coef?cients are determined by non‐linear regression. This equation applies to rough turbulent open‐channel ?ows, where the relative submergence is between 1 and 20 and the entire sediment load moves by saltation. An investigation of the relative magnitudes of f_bt and grain resistance f_c suggests that where dimensionless shear stress θ is less than 1 and saltation is the dominant mode of bedload transport, f_bt/f_c increases with θ but never exceeds 1. Copyright © 2004 John Wiley & Sons, Ltd.     

FLOW FIELD IN SCOURED ZONE OF CHANNEL CONTRACTIONS

Experiments were conducted in a laboratory flume to measure the two-dimensional turbulent flow field in the scoured zone of channel contractions under a clear-water scour condition. The Acoustic Doppler Velocimeter (ADV) was used to detect the flow field at different vertical lines along the centerline of uncontracted (main channel) and contracted zones of the channel. The distributions of time-averaged velocity components, turbulent intensity, turbulent kinetic energy, and Reynolds stresses are presented in nondimensional graphical form. The bed shear stresses are computed from the measured Reynolds stresses being in threshold condition within the zone of contraction where bed was scoured. The data presented in this paper would be useful to the investigators for the development of kinematic flow model and morphological model of scour at a channel or river contraction.     

重金属迁移转化模型研究

大量重金属污染物迁移转化的现象和研究成果都表明重金属以泥沙颗粒为载体迁移转化,描述重金属在天然水体中的迁移转化必须紧紧抓住泥沙颗粒运动及重金属与泥沙之间的转化关系进行.为此在对现有的重金属迁移转化数学模型进行概括分类的基础上,根据水沙运动与污染物相互作用关系,分析了泥沙颗粒运动及重金属吸附解吸不平衡过程,并结合水沙数学模型,建立了重金属迁移转化的耦合模型.同时在模型合理性分析的基础上,对模型进行了计算分析,分析表明模型能够合理地反映重金属污染物在水体中的迁移转化过程.     

Hydro-thermal performance of multilayer capillary barriers in arid lands

In this study, a capillary barrier system was designed and tested for an arid land environment. To simulate arid land conditions of high temperature and sub-irrigation systems, the barrier was subjected to thermal and hydraulic gradients in opposite directions; to test the barrier system under these severe conditions, an experimental apparatus was designed and fabricated. The multilayer capillary barrier consisted of three layers made of silica sand, a mixture of sand and bentonite in equal portions, and a mixture of clay (25%) and aggregate (75%). Several one dimensional coupled heat and moisture tests were performed. Temperature variations along the thickness of the barrier were recorded as a function of time, and at the end of each test, the barrier was sliced into small sections, for the determination of volumetric water content as a function of distance from the heat source. The experimental results were discussed in view of the barrier's intended purpose of its ability to store moisture for long time durations. Coupled heat and moisture flow equations were developed and solved numerically via a finite difference method. Diffusivity parameters were calculated by using experimental results, a numerical model, and Powell's conjugate directions method of nonlinear optimization. The model was calibrated and the results were discussed. Good agreement between calculated and experimental results was obtained. This revised version was published online in July 2006 with corrections to the Cover Date.     

Transport of dissolved methoxy-nonafluorobutane through a saturated column

Solute transport experiments were conducted in a one-dimensional saturated column using dissolved methoxy-nonafluorobutane (HFE-7100), a Novec engineered fluid developed by the 3M Corporation, as the solute. Novec engineered fluids are considered dense non-aqueous phase liquids (DNAPLs) because they are immiscible with water and have a specific gravity greater than one. The HFE-7100 fluid is safer and environmentally friendlier than common DNAPL contaminants such as tetrachloroethylene (PCE) or trichloroethylene (TCE); thus, it is an ideal substitute DNAPL for laboratory groundwater contamination research. Three sets of solute transport experiments were conducted. The first set of experiments was conducted in a glass-bead-packed column using dissolved HFE-7100 as the solute. The second set of experiments was conducted in a sand-packed column using dissolved HFE-7100 as the solute. The third set of experiments was conducted in a sand-packed column using dissolved PCE as the solute. The dissolved HFE-7100 column breakthrough concentrations were compared with dissolved PCE breakthrough concentrations. Results show that the one-dimensional solute transport equation was successful in describing the transport behavior of dissolved HFE-7100. This study demonstrates that the HFE-7100 fluid can be used as a safer substitute DNAPL for groundwater contaminant dissolution and transport research.     

Effects of temperature and humidity upon the transport of sedimentary particles by wind

Wind tunnel simulations of aeolian transport carried out over a range in mean temperature between 32 °C and ?9 °C suggest that cold airflows support higher mass transport rates (Q) than very warm air. The magnitude of this increase is larger than expected, so that analytical and semi‐empirical models underestimate Q. Extrapolation of the results suggests that, at ?40 °C, as for example in the dry valleys of Antarctica in winter, Q may be as much as 70% higher than for the equivalent wind speed in hot deserts at air temperatures of 40 °C. Temperature‐dependent changes in air density and turbulence contribute to this result. The decreased tension of water adsorbed onto particle surfaces at low temperatures is postulated to reduce interparticle cohesion and, thus, to increase the elasticity of particle impacts on cold beds. Definition of the roles that temperature and humidity play in aeolian transport is relevant to studies of palaeoenvironmental reconstruction and extraterrestrial (or planetary) geology. Investigation of present‐day, cold climate features and of climate change effects also requires knowledge of these fundamental relations.