探测冰盖和多年冻土层的融冰探头研发

The exploration of ice sheets by melting vertical holes into the ground has some tradition in terrestrial glaciology. Such probes have been used since the 1960's to investigate the vertical structure of the ice in Greenland and Antarctica and in alpine glaciers. In this paper we look into the possibility to develop similar devices for use on extraterrestrial icy bodies, like e.g. the polar areas on Mars or the icy satellites of the outer solar system. We report on some basic experiments performed in the cryo-vacuum laboratory of the Space Research Institute of the Austrian Academy of Sciences, Graz. In these experiments the penetration of a simple melting probe into compact and porous water ice (with a snow-like texture) was monitored, both under vacuum conditions and under air pressure. The observed penetration speeds for a given power supply are compared with a simple mathematical model. We conclude that a miniature melting probe with small overall dimensions and a reasonable power demand could well be part of the payload of a future planetary mission, for example to the poles of Mars. Such missions are currently under discussion in several space agencies. Moreover such probes could also e? ectively be used in terrestrial environments. A possible design is presented at the end of the paper.     

The Significance of Multiple Saturation Points in the Context of Polybaric Near-fractional Melting

Experimental petrologists have successfully located basalticliquid compositions parental to mid-ocean ridge basalt thatare, within experimental resolution, multiply saturated withthree-phase harzburgite or four-phase lherzolite assemblageson their liquidus at some elevated pressure. Such an experimentalresult is a necessary consequence of any paradigm in which eruptedbasalts derive from single-batch primary liquids that equilibratewith a mantle residue and undergo no subsequent magma mixingbefore differentiation and eruption. Here we investigate whether,conversely, such evidence of multiple saturation is sufficientto exclude dynamic melting models wherein increments of meltare mixed after segregation from residues, during melt transportor in magma chambers. Using two independent models of crystal–liquidequilibria to simulate polybaric near-fractional peridotitemelting, we find that aggregate liquids from such melting processescan display near-intersections of liquidus surfaces too closeto distinguish experimentally from exact multiple saturationpoints. Given uncertainties in glass compositions, fractionationcorrections, experimental temperature and pressure conditions,and achievement of equilibrium, these results suggest that polybaricmixtures can in fact masquerade as mantle-equilibrated single-batchprimary liquids. Multiple saturation points on the liquidussurfaces of primitive basalts do, however, preserve informationabout the average pressure of extraction of their constituentincrements of liquid. KEY WORDS: mantle melting; basaltic volcanism; experimental igneous petrology; thermodynamic modelling; inverse method     

Geodynamic Information in Peridotite Petrology

Systematic differences are observed in the petrology and majorelement geochemistry of natural peridotite samples from thesea floor near oceanic ridges and subduction zones, the mantlesection of ophiolites, massif peridotites, and xenoliths ofcratonic mantle in kimberlite. Some of these differences reflectvariable temperature and pressure conditions of melt extraction,and these have been calibrated by a parameterization of experimentaldata on fertile mantle peridotite. Abyssal peridotites are examplesof cold residues produced at oceanic ridges. High-MgO peridotitesfrom the Ronda massif are examples of hot residues producedin a plume. Most peridotites from subduction zones and ophiolitesare too enriched in SiO₂ and too depleted in Al₂O₃ to be residues,and were produced by melt–rock reaction of a precursorprotolith. Peridotite xenoliths from the Japan, Cascades andChile–Patagonian back-arcs are possible examples of arcprecursors, and they have the characteristics of hot residues.Opx-rich cratonic mantle is similar to subduction zone peridotites,but there are important differences in FeO_T. Opx-poor xenolithsof cratonic mantle were hot residues of primary magmas with16–20% MgO, and they may have formed in either ancientplumes or hot ridges. Cratonic mantle was not produced as aresidue of Archean komatiites. KEY WORDS: peridotite; residues; fractional melting; abyssal; cratonic mantle; subduction zone; ophiolite; potential temperature; plumes; hot ridges     

Petrogenesis of Tertiary Continental Intra-plate Lavas from the Westerwald Region, Germany

Tertiary volcanic rocks from the Westerwald region range frombasanites and alkali basalts to trachytes, whereas lavas fromthe margin of the Vogelsberg volcanic field consist of morealkaline basanites and alkali basalts. Heavy rare earth elementfractionation indicates that the primitive Westerwald magmasprobably represent melts of garnet peridotite. The Vogelsbergmelts formed in the spinel–garnet peridotite transitionregion with residual amphibole for some magmas suggesting meltingof relatively cold mantle. Assimilation of lower-crustal rocksand fractional crystallization altered the composition of lavasfrom the Westerwald and Vogelsberg region significantly. Thecontaminating lower crust beneath the Rhenish Massif has a differentisotopic composition from the lower continental crust beneaththe Hessian Depression and Vogelsberg, implying a compositionalboundary between the two crustal domains. The mantle sourceof the lavas from the Rhenish Massif has higher ²⁰⁶Pb/²⁰⁴Pband ⁸⁷Sr/⁸⁶Sr than the mantle source beneath the Vogelsbergand Hessian Depression. The 30–20 Ma volcanism of theWesterwald apparently had the same mantle source as the QuaternaryEifel lavas, suggesting that the magmas probably formed in apulsing mantle plume with a maximum excess temperature of 100°Cbeneath the Rhenish Massif. The relatively shallow melting ofamphibole-bearing peridotite beneath the Vogelsberg and HessianDepression may indicate an origin from a metasomatized portionof the thermal boundary layer. KEY WORDS: continental rift volcanism; basanites; trachytes; assimilation; fractional crystallization; partial melting     

Quantitative Constraints on Metamorphism in the Variscides of Southern Brittany--a Complementary Pseudosection Approach

Previous studies of metapelitic rocks from the core of the southernBrittany metamorphic belt suggest a complex clockwise P–Tevolution. We use pseudosections calculated for an average subaluminousmetapelite composition in the MnNCKFMASH system and averageP–T calculations to investigate in more detail the metamorphicevolution of these rocks. For migmatites, sequential occurrenceof kyanite, kyanite + staurolite and sillimanite suggests thata prograde evolution to P > 8 kbar at T     

Mafic Pegmatites Intruding Oceanic Plateau Gabbros and Ultramafic Cumulates from Bolivar, Colombia: Evidence for a 'Wet' Mantle Plume?

The fault-bounded Bolívar Ultramafic Complex (BUC) onthe eastern fringes of the Western Cordillera of Colombia wastectonically accreted onto the western coast of South Americain the late Cretaceous–early Tertiary, along with pillowbasalts of the Caribbean–Colombian Oceanic Plateau (CCOP).The complex consists of a lower sequence of ultramafic cumulates,successively overlain by layered and isotropic gabbroic rocks.The gabbros grade into, and are intruded by, mafic pegmatitesthat consist of large magnesiohornblende and plagioclase crystals.These pegmatites yield a weighted mean ⁴⁰Ar–³⁹Ar step-heatingage of 90·5 ± 0·9 Ma and thus coincidewith the timing of peak CCOP volcanism. The chemistry of theBUC is not consistent with a subduction-related origin. However,the similarity in Sr–Nd–Pb–Hf isotopes betweenthe CCOP and the BUC, in conjunction with their indistinguishableages, suggests that the BUC is an integral part of the plume-derivedCCOP. The parental magmas of the Bolívar complex wereprobably hydrous picrites that underwent 20–30% crystallization.The residual magmas from this fractionation contained     

Silica depleted melting of pelites. Petrogenetic grid and application to the Susqueda Aureole, Spain

Metapelitic rocks in the low pressure contact metamorphic aureole around the Susqueda igneous complex, Spain show a number of features that make them an ideal testing ground for the modelling of silica‐undersaturated melting. Rocks in the aureole experienced localized depletion in silica by the segregation of quartz veins during a pre‐anatectic, regional cordierite‐andalusite grade metamorphic event. These rocks were then intruded by gabbroic to dioritic rocks of the Susqueda igneous complex that formed a migmatitic contact metamorphic aureole in the country rocks. This migmatisation event caused quartz‐saturated hornfels and restite formation in rocks that had experienced no quartz vein segregation in the previous regional metamorphic event, but silica‐undersaturated melting in those rocks that were previously depleted in silica. Silica‐undersaturated melting is investigated using a new petrogenetic P–T projection and equilibrium pseudosections calculated in the KFMASH and NCKFMASH systems, respectively. The grid considers quartz absent equilibria and a range of phases that form typically in silica‐undersaturated bulk compositions, for example corundum. It is shown that the quartz‐rich precursors in the Susqueda contact aureole produced about 10% melt during contact metamorphism. However, most of this melt was extracted leaving behind rocks with restitic bulk compositions and minor leucosome segregation. It is suggested that the melt mixed with the host igneous rocks causing an apparent magmatic zoning from diorite in the centre of the complex to tonalite at the margins. In contrast, the quartz‐poor precursors (from which the quartz veins segregated) melted in the silica‐undersaturated field producing a range of assemblages including peritectic corundum and spinel. Melting of the silica‐undersaturated rocks produced only negligible melt and no subsequent melt loss.     

Fuzzy set approaches to classification of rock masses

Rock mass classification is analogous to multi-feature pattern recognition problem. The objective is to assign a rock mass to one of the pre-defined classes using a given set of criteria. This process involves a number of subjective uncertainties stemming from: (a) qualitative (linguistic) criteria; (b) sharp class boundaries; (c) fixed rating (or weight) scales; and (d) variable input reliability. Fuzzy set theory enables a soft approach to account for these uncertainties by allowing the expert to participate in this process in several ways. Hence, this study was designed to investigate the earlier fuzzy rock mass classification attempts and to devise improved methodologies to utilize the theory more accurately and efficiently. As in the earlier studies, the Rock Mass Rating (RMR) system was adopted as a reference conventional classification system because of its simple linear aggregation.

The proposed classification approach is based on the concept of partial fuzzy sets representing the variable importance or recognition power of each criterion in the universal domain of rock mass quality. The method enables one to evaluate rock mass quality using any set of criteria, and it is easy to implement. To reduce uncertainties due to project- and lithology-dependent variations, partial membership functions were formulated considering shallow (<200 m) tunneling in granitic rock masses. This facilitated a detailed expression of the variations in the classification power of each criterion along the corresponding universal domains. The binary relationship tables generated using these functions were processed not to derive a single class but rather to plot criterion contribution trends (stacked area graphs) and belief surface contours, which proved to be very satisfactory in difficult decision situations. Four input scenarios were selected to demonstrate the efficiency of the proposed approach in different situations and with reference to the earlier approaches.     

Relationship between solar radiation and the development and morphology of small cirque glaciers (Maladeta Mountain massif, Central Pyrenees, Spain)

Abstract Spatial and temporal variations in radiative fluxes influence glacier mass‐balance in mountain areas. The primary goal of this study was to assess differences in solar radiation on three glacial cirques located in the Maladeta Mountain massif (Central Spanish Pyrenees), and analyse their implications on glacier development and morphology. A quantitative approach is adopted to obtain the values of solar radiation (direct, diffuse and global radiation), combining several field data parameters (measured at 55 control‐points) with the solar radiation modelling package Ecosim. The data obtained confirm that the morphologies of the glacial bodies developed in the three cirques have a good correlation with the spatial variation on solar radiation inputs, favouring also the conservation (Aneto and Coronas cirques) or total vanishing (Llosás cirque) of the glacial remnants analysed here. The study shows how strongly in this Alpine‐Mediterranean context solar radiation — firstly as a function of latitude and time of year, and locally as a function of topographic slope, aspect and shadowing — controls the mass‐balance and the spatial distribution of melting in small glaciers, having an effect on the development of their morphologies.     

Partial melting controls on the northwest Kyushu basalts from Saga-Futagoyama

Abstract   The major element and compatible trace element compositions of the northwest Kyushu basalts (NWKBs) collected from Saga-Futagoyama were analyzed to examine the petrogenesis of these basalts. Although nepheline-normative alkaline basalts are not found in the basalts from Saga-Futagoyama, the Saga-Futagoyama basalts almost cover the major element variations of NWKBs. The basalts can be chemically divided into two groups: an Fe-poor group (IPG) and an Fe-rich group (IRG). The compositional variation of IPG basalts is essentially controlled by the partial melting of the source as suggested by the following: (i) bulk rock MgO, FeO and NiO compositions indicate that some IPG samples were equilibrated with mantle olivine; and (ii) correlations between Al₂O₃, CaO and MgO are consistent with those of experimental partial melts of peridotites. The inconsistent behaviors of the elements compatible with clinopyroxene (Cpx), such as V (Sc and Cu), preclude the significant role of the fractional crystallization of Cpx and spinel in IPG variation. IPG basalts have low Al and high Fe concentrations compared to the products of melting experiments involving peridotites and pyroxenites, suggesting that the IPG source would have a lithology and bulk rock composition different from those of typical peridotites and pyroxenites. IRG basalts have negative correlations between Fe₂O₃* and MgO, and between V and Fe₂O₃*/MgO, indicating that IRG basalts would have fractionated Cpx. However, the anomalously Fe-rich feature of IRG basalts compared with NWKBs collected from other areas suggests that the role of Cpx fractionation in NWKBs is minor. Relatively low melting temperatures would have principally caused the large chemical variation of NWKBs.