Magma generation and crustal accretion as evidenced by supra-subduction ophiolites of the Albanide–Hellenide Subpelagonian zone

Abstract Ophiolites of the Mirdita–Subpelagonian zone form a nearly continuous belt in the Albanide–Hellenide orogen, including mid‐ocean ridge basalt (MORB) associations in the western Mirdita sector and supra‐subduction zone (SSZ) complexes, with prevalent island arc tholeiitic (IAT) and minor boninitic affinities in the eastern part of the belt (i.e. eastern Mirdita, Pindos, Vourinos). In addition, basalts with geochemical features intermediate between MORB and IAT (MORB/IAT) are found in the central Mirdita and in the Aspropotamos sequence (Pindos). These basalts alternate with pure MORB and are cut by boninitic dykes. The distinctive compositional characteristics of the mafic magmas parental to the different ophiolitic suites can be accounted for by partial melting of mantle sources progressively depleted by melt extractions. Partial melting processes (10–20%) of lherzolitic sources generated pure MORB, leaving clinopyroxene‐poor lherzolite as a residuum. Approximately 10% water‐assisted partial melting of this latter source, in an SSZ setting, may in turn generate basalts with MORB/IAT intermediate characteristics, whereas IAT basalts and boninites may have been derived from 10–20% and 30% partial melting, respectively, of the same source variably enriched by subduction‐derived fluids. In addition, boninites may also have been derived by comparatively lower degrees of hydrated partial melting of more refractory harzburgitic sources. A generalized petrologic model based on mass balance calculations between bulk rock and mineral compositions, indicate that most of the intrusives (from ultramafic cumulates to gabbronorites and plagiogranites), as well as sheeted dykes and volcanics (from basalts to rhyodacites) forming the bulk crustal section of the SSZ ophiolites, may be accounted for by shallow fractional crystallization from low‐Ti picritic parental magmas very similar in composition to IAT picrites from Pacific intraoceanic arcs. The most appropriate tectono‐magmatic model for the generation of the SSZ Tethyan ophiolites implies low velocity plate‐convergence of the intraoceanic subduction and generation of a nascent arc with IAT affinity and progressive slab roll‐back, mantle diapirism and extension from the arc axis to the forearc region, with generation of MORB/IAT intermediate basalts and boninitic magmas.     

2-D crustal Poisson's ratio from seismic travel time inversion in Changbaishan Tianchi volcanic region

Based on the inversion method of 2D velocity structure and interface, the crustal velocity structures of P-wave and S-wave along the profile L1 are determined simultaneously with deep seismic sounding data in Changbaishan Tianchi volcanic region, and then its Poisson's ratio is obtained. Calculated results show that this technique overcomes some defects of traditional forward calculation method, and it is also very effective to determine Poisson's ratio distribution of deep seismic sounding profile, especially useful for study on volcanic magma and crustal fault zone. Study result indicates that there is an abnormally high Poisson's ratio body that is about 30 km wide and 12 km high in the low velocity region under Tianchi crater. Its value of Poisson's ratio is 8% higher than that of surrounding medium and it should be the magma chamber formed from melted rock with high temperature. There is a high Poisson's ratio zone ranging from magma chamber to the top of crust, which may be the uprise passage of hot substance. The lower part with high Poisson's ratio, which stretches downward to Moho, is possibly the extrusion way of hot substance from the uppermost mantle. The conclusions above are consistent with the study results of both tomographic determination of 3D crustal structure and magnetotelluric survey in this region.     

2-D crustal Poisson’s ratio from seismic travel time inversion in Changbaishan Tianchi volcanic region

Based on the inversion method of 2D velocity structure and interface, the crustal velocity structures of P-wave and S-wave along the profile L ₁ are determined simultaneously with deep seismic sounding data in Changbaishan Tianchi volcanic region, and then its Poisson’s ratio is obtained. Calculated results show that this technique overcomes some defects of traditional forward calculation method, and it is also very effective to determine Poisson’s ratio distribution of deep seismic sounding profile, especially useful for study on volcanic magma and crustal fault zone. Study result indicates that there is an abnormally high Poisson’s ratio body that is about 30 km wide and 12 km high in the low velocity region under Tianchi crater. Its value of Poisson’s ratio is 8% higher than that of surrounding medium and it should be the magma chamber formed from melted rock with high temperature. There is a high Poisson’s ratio zone ranging from magma chamber to the top of crust, which may be the uprise passage of hot substance. The lower part with high Poisson’s ratio, which stretches downward to Moho, is possibly the extrusion way of hot substance from the uppermost mantle. The conclusions above are consistent with the study results of both tomographic determination of 3D crustal structure and magnetotelluric survey in this region. Foundation item: Key Project from China Earthquake Administration and the Project (95-11-02-01) from Ministry of Science and Technology (2001DIA10003). Contribution No. RCEG200401, Geophysical Exploration Center, China Earthquake Administration.     

Numerical model of convection in sills

The numerical model of convection in magma sills is developed. The model is based on a full system of equations of fluid dynamics and includes heat transfer, buoyancy effects and diffusion of some minor component (marker). Solidification is treated as a phase transition. The results indicate that there are some qualitative differences between very thin sills with Rayleigh number Ra = 10⁵ and thin sills with Ra = 10⁶. For a basaltic magma the first case corresponds to the thickness of the sills of approximately 30 cm and the second case corresponds to the thickness of 60 cm. In the first case mixing is inefficient and conduction is the dominant form of heat transfer. In the second case mixing is efficient and convection is the dominant form of heat transfer. Some of the results can be scaled for the more viscous magmas in thicker sills.     

Continental rift systems and anorogenic magmatism

Precambrian Laurentia and Mesozoic Gondwana both rifted along geometric patterns that closely approximate truncated-icosahedral tessellations of the lithosphere. These large-scale, quasi-hexagonal rift patterns manifest a least-work configuration. For both Laurentia and Gondwana, continental rifting coincided with drift stagnation, and may have been driven by lithospheric extension above an insulated and thermally expanded mantle. Anorogenic magmatism, including flood basalts, dike swarms, anorthosite massifs and granite-rhyolite provinces, originated along the Laurentian and Gondwanan rift tessellations. Long-lived volcanic regions of the Atlantic and Indian Oceans, sometimes called hotspots, originated near triple junctions of the Gondwanan tessellation as the supercontinent broke apart. We suggest that some anorogenic magmatism results from decompression melting of asthenosphere beneath opening fractures, rather than from random impingement of hypothetical deep-mantle plumes.     

Deep Mechanical Background for the Cenozoic Volcanism in the Tibetan Plateau

INTRODUCTION Volcanoesaremostlyobservedinoceanicridges,hotspotsandcontinentalriftzones(Hongetal.,2003),andarerarelyobservedincontinentalinteri ors.However,sincethevolcanoeswithintheconti nentinteriorscannotbeattributedtotheplate/block marginprocess,theydr…     

Assimilation and Fractional Crystallization Controlled by Transport Process of Crustal Melt: Implications from an Alkali Basalt-Dacite Suite from Rishiri Volcano, Japan

Mechanisms of fractional crystallization with simultaneous crustalassimilation (AFC) are examined for the Kutsugata and Tanetomilavas, an alkali basalt–dacite suite erupted sequentiallyfrom Rishiri Volcano, northern Japan. The major element variationswithin the suite can be explained by boundary layer fractionation;that is, mixing of a magma in the main part of the magma bodywith a fractionated interstitial melt transported from the mushyboundary layer at the floor. Systematic variations in SiO₂ correlatewith variations in the Pb, Sr and Nd isotopic compositions ofthe lavas. The geochemical variations of the lavas are explainedby a constant and relatively low ratio of assimilated mass tocrystallized mass (‘r value’). In the magma chamberin which the Kutsugata and Tanetomi magmas evolved, a strongthermal gradient was present and it is suggested that the marginalpart of the reservoir was completely solidified. The assimilantwas transported by crack flow from the partially fused floorcrust to the partially crystallized floor mush zone throughfractures in the solidified margin, formed mainly by thermalstresses resulting from cooling of the solidified margin andheating of the crust. The crustal melt was then mixed with thefractionated interstitial melt in the mushy zone, and the mixedmelt was further transported by compositional convection tothe main magma, causing its geochemical evolution to be characteristicof AFC. The volume flux of the assimilant from the crust tothe magma chamber is suggested to have decreased progressivelywith time (proportional to t^–1/2), and was about 3 x 10^–2m/year at t = 10 years and 1 x 10^–2 m/year at t = 100years. It has been commonly considered that the heat balancebetween magmas and the surrounding crust controls the couplingof assimilation and fractional crystallization processes (i.e.absolute value of r). However, it is inferred from this studythat the ratio of assimilated mass to crystallized mass canbe controlled by the transport process of the assimilant fromthe crust to magma chambers. KEY WORDS: assimilation and fractional crystallization; mass balance model; magma chamber; melt transport; Pb isotope     

Episodic granite accumulation and extraction from the mid‐crust

The processes of long‐range granitic magma transfer from mid‐ and lower crustal anatectic zones to upper crustal pluton emplacement sites remain controversial in the literature. This is partly because feeder networks that could have accommodated this large‐scale magma transport remain elusive in the field. Existing granite ascent models are based largely on numerical and theoretical studies that seek to demonstrate the viability of fracture‐controlled magma transport through dykes or self‐propagating hydrofractures. In most cases, the models present very little supporting field evidence, such as sufficiently voluminous near‐ or within‐source magma accumulations, to support their basic premises. We document large (deca‐ to hectometre‐scale), steeply dipping and largely homogeneous granite lenses in suprasolidus (~5 kbar, ~750 °C) mid‐crustal rocks in the Damara Belt in Namibia. The lenses are surrounded by and connected to shallowly dipping networks of stromatic leucogranites in the well‐layered gneisses of the deeply incised Husab Gorge. The outcrops define a four‐stage process from (i) the initial formation and growth of large, subvertical magma‐filled lenses as extension fractures developed at high angles to the subhorizontal regional extension in relatively competent wall‐rock layers. This stage is followed by (ii) the simultaneous lateral inflation and (iii) subcritical vertical growth of the lenses to a critical length that (iv) promotes fracture destabilization, buoyancy‐driven upward fracture mobilization and, consequently, vertical magma transport. These field observations are compared with existing numerical models and are used to constrain, by referring to the dimensions of the largest preserved inflated leucogranite lens, an estimate of the minimum fracture length (~100 m) and volume (~2.4 × 10⁵ m³) required to initiate buoyancy‐driven brittle fracture propagation in this particular mid‐crustal section. The critical values and field relationships compare favourably with theoretical models of magma ascent along vertical self‐propagating hydrofractures which close at their tails during propagation. This process leaves behind subtle wake‐like structures and thin leucogranite trails that mark the path of magma ascent. Reutilization of such conduits by repeated inflation and drainage is consistent with the episodic accumulation and removal of magma from the mid‐crust and is reflected in the sheeted nature of many upper crustal granitoid plutons.     

PETROLOGY 1.IGNEOUS PETROLOGY

正20140707Bai Yunshan(Wuhan Center,China Geological Survey,Wuhan 430205,China);Duan Qifa Geological Characteristics and Tectonic Significance of Volcanic Rocks from Kenan Formation of the Upper Triassic in Zhahe Area,Southern Qinghai Province(Geology and Mineral Resources of South China,ISSN1007-3701,CN42-1417/P,29(2),     

东昆北成矿带冰沟南铜镍矿辉长岩地球化学特征

通过对东昆北成矿带冰沟南铜镍矿辉长岩的全岩地球化学进行分析,以确定该岩体的岩石成因及其形成的构造环境。冰沟南辉长岩SiO_2的含量为49.72%~51.58%,岩石系列为钙碱性。稀土元素球粒陨石分配模式为轻稀土略富集型,δEu为1.26~1.54,轻微正Eu异常。岩石富集大离子亲石元素(LILE)Rb、Ba、K,相对亏损P。岩体中的La/Sm、Th/La和Nb/U比值显示在就位过程中经历了一定程度的地壳混染。研究认为,岩体的岩浆源区为亏损地幔。结合区域演化,认为岩体形成于碰撞后伸展的背景。