1819年黄河中游极端降水:史实、特征及气候背景

据清官档案与方志记载,复原了1819年(清嘉庆二十四年)黄河中、下游大范围房屋倒塌、民田冲没、人口伤亡、黄河多处决溢等雨涝灾情图景及时空分异特征,这是在明清小冰期大气候背景下的极端气候事件和重大气象灾害.研究指出,该年黄河中游夏秋季雨期长(连阴雨)、且多大到暴雨,二级流域(汾河、渭河)6-9月份降水县区雨日高达40日以...     

对转压气机三维掠动叶优化设计

为探索三维掠动叶降低对转压气机二次流损失的潜力,进一步提高对转压气机气动性能,基于近似函数与遗传算法,针对某对转压气机双排转子在整机环境下进行三维掠动叶优化设计,并对优化前后流场进行对比分析。优化成功的得到了双排“S”形掠动叶,结果表明:三维掠动叶有效改善了双排动叶吸力面径向二次流,减小了吸力面低速区,提高了对转压气机性能,优化工况点整机效率提高0.6%,全工况范围内效率均有所提高;三维掠动叶提高对转压气机效率的根本原因是其对径向负荷分配的重新调整,将叶展下方流动较差区域负荷移至叶展上方,改善流场的同时保证对转压气机负荷不变。      

云南弥渡宝兴厂金矿床成矿模式

宝兴厂矿区地质构造复杂,成矿条件有利。区内北东向响水断裂带是主要的控岩和控矿构造。三类金矿床分别在斑岩成矿期、热液成矿期和表生成矿期成生。文中建立相应的成矿模式。     

涠西南凹陷涠洲10-3油田及围区流三段沉积相研究

为了促进涠西南凹陷涠洲10-3油田及围区流三段油藏的滚动勘探开发,开展了油区沉积相精细研究。利用岩芯、录井、测井和地震等资料,在识别不同级别层序界面和湖泛面的基础上,将涠洲10-3油田及围区流三段划分为2个长期基准面旋回和8个中期基准面旋回,建立了高分辨率层序地层对比格架。在岩芯描述基础上,进行单井沉积相、连井沉积相、平面沉积相分析,认为研究区流三段发育冲积扇、扇三角洲和湖泊3种沉积相,并系统划分了沉积微相类型。探讨了碎屑流沉积的相带归属,将发育在河道中的碎屑流沉积划分为河道型碎屑流沉积,将单独产出的碎屑流沉积根据沉积环境不同划分为水上非河道化碎屑流沉积和水下非河道化碎屑流沉积。最后对各中期基准面旋回的沉积相展布特征和演化规律进行了探讨,并建立了符合研究区的沉积相模式。     

辽宁岫岩县偏岭地区晚大石桥期沉积环境及构造古地理

偏岭地区大石桥组三段自下而上分为6个岩性层,每层都有不同的岩性组合特征.碳酸盐岩的CaO/MgO比值具有指示沉积环境的作用.通过分析该段地层的岩性组合特征,并结合不同层位的CaO/MgO比值,推断出偏岭地区在晚大石桥期的沉积环境演变过程为干旱湖、封闭海湾→开阔浅海→滨海→干旱湖、封闭海湾→浅海（偶为潮间或滨岸）→滨海、浅海交互环境.     

PARASOL/POLDER3卫星数据的海洋上空云检测

在卫星海洋遥感中,云作为海气耦合系统最重要的调节器之一,其检测结果对海洋上空云微物理特性的反演精度有较大影响。因此,快速而准确识别海洋上空的云像元是卫星遥感数据处理过程中首要解决的关键问题。以PARASOL (Polarization and Anisotropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar)卫星搭载的POLDER3载荷遥感数据为研究对象,提出一种改进的海洋上空云检测方法。首先剔除海洋耀光;接着利用有云与晴空区近红外反射率差异检验识别有云像元,并利用偏振反射率检验进一步识别低反射率的云像元;然后利用近红外与可见光反射率比值检验识别晴空像元;最后建立多角度云检测结果空间融合规则,重新标记有云、晴空和未定像元。以印度洋海区为例进行实验分析,将云检测结果与Buriez方法进行对比,发现检测精度基本相当,而有云像元的识别速度却平均提高约3倍。结果表明:该方法能有效的检测出海洋上空的云像元,满足业务化数据处理的高精度及时效性要求,为后续云微物理特性反演提供可靠的数据源。     

三维遥感技术在十宜铁路地质选线中的应用

介绍如何利用遥感技术生成的三维可视化图进行相关的地质要素判读和铁路选线,分析对比线路工程地质条件,有一定的实际应用参考价值。     

葛店矿双庙扩大区三维地震勘探

葛店煤矿双庙扩大区位于豫、皖两省交界处。勘探区为一轴向北北东向的不对称向斜构造,地层倾角26°～30°,测区深部有岩浆岩侵入体,严重影响煤层赋存形态;地表条件复杂,村庄密集、河流较多,测区东侧塌陷区水塘大面积分布．三维地震勘探野外施工难度大。本区地震勘探观测系统设计为12线18炮制,为避免偏移归位及叠加次数降低等问题,在向斜轴部两侧、村子周边及河岸处适当加密炮点,并在塌陷区利用钢钎插置检波器以保证CDP点完整性。数据处理采取了叠前反褶积、叠前时间偏移等技术,数据处理效果显著。遵循多波组对比、多个数据体综合解释的原则,以纵向、横向和任意时间剖面相结合,充分利用三维可视化技术进行地震资料解释。本次勘探成果查明了主采煤层三2^2、二2煤层的构造形态及埋藏深度;解释落差5m以上断层34条,其中修改原有断层5条;另外新发现小于5m的异常断点22个。经巷道验证煤层底板标高误差0．43％～1．96％,巷道已揭露断层7条,与解释成果基本一致。     

煤炭地下气化区高密度三维地震勘探技术研究

地下煤层气化的燃烧范围,气化燃烧热力影响边界、形态、方向,气化区冒落带的发展高度及气化煤层裂隙发育程度,是开展煤炭地下气化工程迫切需要解决的问题。基于煤炭地下气化工程试验区地震地质情况,从地震响应入手,在分析煤炭地下气化后地震波场响应特征的基础上,提出了运用高密度三维地震采集技术结合全三维地震属性解释技术,高精度识别煤炭地下气化燃烧范围、气化热力影响边界的方法。实际勘探成果表明,本方法地震成像清晰,预测精度高,与钻探结果吻合较好。     

Structural evolution of the Bayanhongor region, west-central Mongolia

Most of previous models suggest that the Central Asia Orogenic Belt grew southward in the Phanerozoic. However, in the Bayanhongor region in west-central Mongolia, volcanic arc, accretionary prism, ophiolite, and passive margin complexes accreted northeastward away from the Baydrag micro-continent, and hence the region constitutes the southwestern part of a crustal-scale syntaxis close to the west. The syntaxis should be original, because presumably reorientation due to strike-slip faulting can be ignored. It is reconfirmed that the Baydrag eventually collided with another micro-continent (the Hangai) to the northeast. A thick sedimentary basin developed along the southern passive margin of the Hangai micro-continent. This region is also characterized by an exhumed metamorphosed accretionary complex and a passive margin complex, which are both bounded by detachment faults as well as basal reverse faults which formed simultaneously as extrusion wedges. This part of the Central Asia Orogenic Belt lacks exhumed crystalline rocks as observed in the Himalayas and other major collisional orogenic belts. In addition, we identified two phases of deformation, which occurred at each phase of zonal accretion as D1 through Cambrian and Devonian, and a synchronous phase of final micro-continental collision of Devonian as D2. The pre-collisional ocean was wide enough to be characterized by a mid-ocean ridge and ocean islands. Two different structural trends of D1 and D2 are observed in accretionary complexes formed to the southwest of the late Cambrian mid-ocean ridge. That is, the relative plate motions on both sides of the mid-ocean ridge were different. Accretionary complexes and passive margin sediments to the northeast of the mid-ocean ridge also experienced two periods of deformation but show the same structural trend. Unmetamorphosed cover sediments on the accretionary prism and on the Hangai micro-continent experienced only the D2 event due to micro-continental collision. These unmetamorphosed sediments form the hanging walls of the detachment faults. Moreover, they were at least partly derived from an active volcanic arc formed at the margin of the Baydrag micro-continent.