一种基于可扩展编码的P2P网络视频仿真系统的设计与实现

可扩展编码从编码入手解决网络带宽自适应问题,同时一定程度上增强了视频流的抗误码性。在opnet仿真平台上搭建了基于可扩展编码的P2P网络视频仿真系统,对仿真系统中的资源发现型机制和流媒体的传输机制做了详细的阐述,并具体描述了仿真系统的搭建过程,最后给出了仿真分析和测试结果。     

Reproductive Biology of Yeilowfin Tuna T. albacares in the West-Central Indian Ocean

Survey of yellowfin tuna in the west-central Indian Ocean was conducted on board of Chinese Iongliners during 2003, 2004 and 2005, which is a part of Chinese Tuna Fishery Scientific Observer Program (CTFSOP). The reproductive biology has been investigated. A total of 1023 samples are collected including 417 ovaries and 606 testes. Spawning activities of yellowfin tuna have been studied for both male and female from January to June. The data showed that the average monthly sex ratio is 0.59, and the minimum length at sexual maturity is 101 cm for female and 110 cm for male respectively. Length at 50% sexual maturity is esti- mated at 113.77 cm for female and 120.20 cm for male, whereas maturation rate is 0.066 cm-1 for female and 0.091 cm-1 for male. Sex ratio by length class indicates that the proportion of male is higher than female's along with size increasing; for instance, in the group of the body length longer than 145 cm, some females have their body length from 145 to 160 cm and males have their body length at 160 cm and even longer. Statistically, yellowfin tuna has a significant seasonal reproduction.     

Hydrodynamic performance of a T-shaped floating breakwater

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.     

An efficient and robust approach to predict ship self-propulsion coefficients

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.     

CFD modelling of a small–scale fixed multi–chamber OWC device

Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost–sharing structures and proximity of power generation facilities to existing infrastructure. In this paper, an incompressible three–dimensional CFD model is constructed to simulate a fixed Multi–Chamber OWC (MC–OWC) device. The CFD model is validated; the simulation results are found to be in good agreement with experimental results obtained from a scale physical model tested in a wave tank. The validated CFD model is then used for a benchmark study of 96 numerical tests. These investigate the effects of the PTO damping caused by the power take–off (PTO) system on device performance. The performance is assessed for a range of regular wave heights and periods. The results demonstrate that a PTO system with an intermediate damping can be used for all chambers in the MC–OWC device for most wave period ranges, except for the long wave periods. These require a higher PTO damping. An increased incident wave height reduces the device capture width ratio, but there is a noticeable improvement for long wave periods.     

Cartographic Design and the Space–Time Cube

This paper reports on the results of an empirical evaluation that aimed to define the effectiveness and efficiency of different visual variables in depicting the Space–Time Cube’s (STC) content. Existing STC applications demonstrate that the most used visual variables are size and colour hue. Less is known, however, about their usability metrics. The research sets design criteria for STC contents, such as space–time paths, based on the cartographic design theory. The visual variables colour hue, colour value, colour saturation, size and orientation have been applied in two different use case studies. Besides, to support the three-dimensional visual environment, depth cues such as shading and transparency were considered too. User tests have been executed based on real-world problems with particular attention for the visualization strategy and data complexity. The outcomes revealed the most efficient and effective visual variables to represent data of various complexities in the STC.     

Cartographic Symbol Design Considerations for the Space–Time Cube

The cartographic representation of geographic phenomena in the space–time cube comes with special challenges and opportunities when compared with two-dimensional maps. While the added dimension allows the display of attributes that vary with time, it is difficult to display rapidly varying temporal data given the limited display height. In this study, we adapt 2D cyclic point symbols to construct 3D surfaces designed along a helical path for the space–time cube. We demonstrate how these complex?3D helical surfaces can display detailed data, including data reported daily over 100 years and data reported in four-hour intervals over a year. To create the point symbols, each value is plotted along the curve of a helix, with each turn of the helix representing one year or week, respectively. The model is modified by varying the radii from the time axis to all points using the attribute value, in these cases maximum daily temperature and four-hourly ridership, and then creating a triangulated surface from the resulting points. Using techniques common to terrain representation, we apply hue and saturation to the surface based on attribute values, and lightness based on relief shading. Multiple surfaces can be displayed in a space–time cube with a consistent time interval facing the viewer, and the surfaces or viewer perspective can be rotated to display synchronized variations. We see this method as one example of how cartographic design can refine or enhance operations in the space–time cube.     

Re-examining urban region and inferring regional function based on spatial–temporal interaction

Urban system is shaped by the interactions between different regions and regions planned by the government, then reshaped by human activities and residents’ needs. Understanding the changes of regional structure and dynamics of city function based on the residents’ movement demand are important to evaluate and adjust the planning and management of urban services and internal structures. This paper constructed a probabilistic factor model on the basis of probabilistic latent semantic analysis and tensor decomposition, for purpose of understanding the higher order interactive population mobility and its impact on urban structure changes. First, a four-dimensional tensor of time (T)?×?week (W)?×?origin (O)?×?destination (D) was constructed to identify the day-to-day activities in three time modes and weekly regularity of weekday/weekend pattern. Then we reclassified the urban regions based on the space clustering formed by the space factor matrix and core tensor. Finally, we further analysed the space–time interaction on different time scales to deduce the actual function and connection strength of each region. Our research shows that the application of individual-based spatial–temporal data in human mobility and space–time interaction study can help to analyse urban spatial structure and understand the actual regional function from a new perspective.     

基于对等网络技术的气象数据共享服务应用

气象数据共享业务广泛采用了单一资料源向各个目标节点分发的方式,针对这种共享业务的特点,设计并实现了一种基于对等网络技术的气象数据共享应用,提供资料源的共享发布以及节点间的共享访问功能。该应用通过搭建的仿真平台模拟实际业务应用,验证了在全国气象宽带网络上实现共享传输的可行性。在随后的小范围业务试验中进一步证明了该应用能够在特定的业务场景中不增加中心节点资源消耗而提升数据共享的传输效率。