天然气水合物区多相流体运移模型：以南海神狐海域为例

天然气水合物是重要的海洋油气资源,近年来利用孔隙水地球化学手段结合流体反应运移模型对水合物进行勘探已 成为研究热点。文章针对南海神狐海域钻探GMGS-1航次的数据资料,用孔隙水溴碘摩尔数比值拟合全新世流体运移速率, 构建了二期次非稳态水合物多相流体运移模型,并以SH7站位作为应用,发现自更新世以来研究区水合物成藏系统处于衰 退状态。通过模型参数敏感性分析,了解到影响模型输出的参数权重从高到低依次是沉积物孔隙度、有机质含量和沉积埋 藏速率。进一步数值分析表明,在水合物成藏系统中,有机质含量与水合物饱和度满足线性相关,其他主要参数与饱和度 的关系并非单调函数,且主导水合物稳定区内的甲烷物源是深部外源流体所携带的甲烷。多相流体运移模型对水合物资源 勘查具有一定的理论意义。     

新疆青河县库布苏破碎蚀变岩型金矿元素迁移特征与规律研究

本文以新疆库布苏金矿北矿带为研究对象,讨论了库布苏金矿床北矿带元素活动特征,成矿及伴生元素、主量元素、微量元素、稀土元素的质量迁移规律;根据稀土元素的质量迁移、地球化学特征,初步探讨了成矿流体的环境条件和来源问题;并依据元素迁移地球化学图研究了库布苏北矿带105勘探线剖面的元素质量迁移程度和范围。研究结果表明,赋矿闪长玢岩脉及围岩的元素发生明显的带入带出作用,元素迁移活动规律明显,成矿阶段发生明显带入有Au、As、Bi、Ag、Sb、K2O、Si O2,说明引起闪长玢岩脉和接触带围岩蚀变的流体中富含Au、As、K2O、Si O2等,导致这些带入元素向矿体迁移富集;发生明显带出的有Ba、Sr、Cu、Mg O、Na2O、Fe2O3、Ca O,说明Ba、Sr、Mg O、Na2O等受热液蚀变作用随流体迁出。矿区岩脉的稀土元素质量变化显著,发生明显的带入带出,岩脉交代蚀变前后的轻重稀土分馏均明显,蚀变后的岩脉轻重稀土分馏程度有减小趋势。赋矿闪长玢岩脉稀土元素配分曲线右倾,轻稀土富集,轻重稀土分馏明显,Eu强烈负异常,Ce弱负异常,说明库布苏金矿成矿流体条件应为较高温度和还原环境。从围岩与脉岩中元素的迁移程度和迁移范围可见,带入的成矿指示元素有As、W、Sb、Bi,带出的成矿指示元素有Mg、Na。     

Fluid Inclusion Studies of Comb Quartz and Stibnite at the Hishikari Au–Ag Epithermal Deposit,Japan

Fluid inclusion microthermometry was conducted on late‐stage barren comb quartz and the latest stibnite at the Hishikari deposit to characterize the hydrothermal activity responsible for vein formation. Eight fluid inclusion assemblages (i.e. fluid inclusions trapped at the same time, ‘FIAs’) were studied to determine the formation fluid temperatures and salinities for the comb quartz in the Shosen No. 2 vein, Sanjin ore zone, and the stibnite in the Seisen No. 1–1 vein, Yamada ore zone. The average homogenization temperatures (the formation temperatures) of the seven FIAs from the comb quartz were between 207 and 230°C, while the average homogenization temperature (the formation temperature) of an FIA from the stibnite was 113°C. The measured fluid salinities of the seven FIAs from the comb quartz were low, ranging between 0.0 and 1.1 wt% NaCl equiv., indicating that dilute fluids were responsible for the comb quartz formation. By comparison with previous microthermometric data, the formation temperatures of the studied comb quartz were higher than those of columnar adularia and comb quartz at most other veins (generally around 200°C) but were similar to those of columnar adularia at Keisen veins (230°C) in the same ore zone. The higher formation temperatures both in the Shosen and the Keisen veins in the Sanjin ore zone indicate that the fractures corresponding to the vein system at the Sanjin ore zone were main conduits for hot ascending fluids. The low formation temperature of stibnite in the latest stage (113°C) indicates that stibnite precipitation occurred during a waning stage of hydrothermal activity. Combined with previous thermodynamic data on antimony solubilities, the large discrepancy between the formation temperature of the comb quartz (200–230°C) and that of the stibnite suggests that the stibnite may have precipitated as a result of a drastic cooling of the hydrothermal system.     

Fracture Characteristics and Heat Accumulation of Jixianian Carbonate Reservoirs in the Rongcheng Geothermal Field, Xiong’an New Area

Geothermal energy plays an important role in urban construction of the Xiong’an New Area. Geothermal reservoir fracture distribution of the Mesoproterozoic Jixianian Wumishan Formation (Fm.) carbonate reservoir in the Rongcheng geothermal field are evaluated based on FMI log from Wells D19 and D21. The results show carbonate reservoir fracture density of Well D19 is 15.2/100 m, greater than that of Well D21 with a value of 9.2/100 m. Reservoir porosity and permeability of Well D19 are better than that of Well D21, and the water saturation is bimodally distributed. The movable fluid volume ratio (BVM) of Well D19 is 2% to 8% with some zones exceeding 20%, while the value of Well D21 is less than 4%. Therefore, reservoir fractures in Well D19 are more conducive to fluid flow. Reservoir fractures have a similar occurrence to normal faults, indicating that the tensile stress field controlled the formation of such fractures. Developed reservoir fractures provide a good channel for groundwater convection. The circulation of regional groundwater and the heat exchange between water and rock and the multiple heat accumulation patterns form a stable and high potential heat reservoir in the Rongcheng geothermal field.     

碳酸盐岩层序地层格架对岩溶储层的控制作用——以渤海西南海域下古生界为例

以钻井、测井、地震以及岩心、薄片资料为基础,在划分三级层序的基础上,探讨了渤海西南海域下古生界层序地层特征及其对岩溶储层的控制作用。结果表明：1）三级层序界面附近发育碳、氧同位素负异常以及自然能谱Th/K正异常,基于此特征将下古生界划分为21个三级层序;2）白云岩是研究区主要的储集岩性,层序通过控制垂向岩性的变化进而控制了优质储层的发育;3）将白云岩发育的12个三级层序定义为"优势储集层序",加里东期构造不整合与12个"优势储集层序"耦合控制了潜山型储层规模及其产能高低;寒武系内发育以溶蚀孔隙为主的内幕型岩溶储层,亦限定发育于"优势储集层序"之中。实际勘探中,优选风化界面与"优势储集层序"耦合区域优先钻探,同时兼顾内幕型储层,其是今后该区高效勘探的关键。     

地震微裂群区与岩浆热液成矿

岩浆热液矿床是在地壳浅部形成的,恰好位于浅源地震的震源深度范围.文章将地震机制中的微裂隙群区理论引入到岩浆热液矿床成矿过程中,地震组合模式中闭锁带必须在下一次断裂滑动之前破坏,所以这个带为微裂群区和它相关的震源区的核心.文章认为微裂群区理论不但揭示了孕震机制,同时也揭示了岩浆热液矿床形成过程,岩浆热液侵位与断裂形成过程中微裂群区的形成发展密切相关,成矿期矿体范围内应力场与区域应力场呈共轭关系.微裂群区即为岩浆热液矿床的矿化富集场,控矿的隐爆角砾岩带也与微裂群区密切相关.     

辫状河油藏层内非均质性及其对剩余油分布的影响

辫状河油藏是我国主要油藏类型之一,目前普遍进入高含水期,层内非均质严重制约其高效开发. 本文以孔店油田馆陶组岩心、测井资料为基础,结合生产开发数据,分析了辫状河油藏层内非均质性及其对剩余油分布的影响. 结果表明:研究区储层成因为辫状河道及心滩. 辫状河道为正韵律,物性差异大,夹层薄;而心滩以复合正韵律为主,物性差异中等偏强,夹层厚. 由心滩对应的采油井夹层控制的剩余油较多,垂积体的上部易形成剩余油富集区,挖掘潜力大.     

利用单渗砂层能量厚度研究有利沉积微相及其含油有利区的方法

针对鄂尔多斯盆地陕北斜坡中部特低渗透储层识别主体骨架砂体微相带及筛选含油有利区工作,提出利用单渗砂层能量厚度控制划分最为有利的沉积微相带。利用多种测井响应提取单渗砂层沉积能量及其能量厚度信息,使其曲线幅度、厚度、形状、接触关系、次级形态等特征和数据大小能够集中反映相对高渗的单渗砂层最大沉积能量及厚度变化,确认出三角洲前缘水下分流河道微相及其河道叠置型河口坝微相骨架砂体的发育、规模及分布范围,有效地克服了层段中几个成因相近薄砂层或砂泥互层中砂层累加厚度识别和划分主体骨架砂体微相带的失误。通过该区目的层段自然电位、自然伽马、密度、中子、声波、电阻率测井曲线和岩性、物性及其能量厚度统计,建立起单渗砂层能量厚度下限标准及夹层扣除标准,在该区长4+511特低渗透储层中提取单渗砂层及其沉积能量信息,控制划分出有利沉积微相带及其骨架砂体分布,预测和筛选出不同类型相对高渗高产含油有利区,它们不同程度勾画出河道主体带油藏与南西部华池油藏连片延伸趋势、形态和特征,为该区特低渗透油田增储上产提供有利目标和重点层位及井区。     

A coupled discrete element model for the simulation of soil and water flow through an orifice

Soil erosion around defective underground pipes can cause ground collapses and sinkholes in urban areas. Most of these soil erosion events are caused by fluidization of the surrounding soil with subsequent washing into defective sewer pipes. In this study, this soil erosion process is simplified as the gradual washout of sand particles mixed with water through an orifice. The discrete element method is used to simulate the large deformation behavior of the sand particles, and the Darcy fluid model is coupled with this approach to simulate fluid flow through porous sand media. A coupled 3D discrete element model is developed and implemented based on this scheme. To simulate previous experiments using this coupled model considering the current computing capacity, we incorporated a ‘supply layer’ to study the continuous erosion process. The coupled model can predict the erosion flow rates of sand and water and the shape of erosion void. Thus, the model can be used as an effective and efficient tool to investigate the soil erosion process around defective pipes. Copyright © 2017 John Wiley & Sons, Ltd.     

Drilling Technology of the M-1 Well in Hot Dry Rock of Matouying,Tangshan北大核心CSCD

This paper presents the general situation and key techniques of the drilling well M-1 in Matouying dry hot rock exploration hole, Leting, Tangshan, Hebei Province. A series of problems have been studied on the sea water drilling fluid, high temperature resistant fresh water drilling fluid, screw composite drilling technique, screw hole coring technology, and high temperature, thus solving the difficulty of sea water drilling fluid well protection, poor stability of drilling fluid under high temperature, and low efficiency in hot dry rock drilling and coring drilling to ensure the safety of the borehole and improve drilling efficiency. The high temperature resistant double condensation and double density cement slurry system and relevant technical measures are adopted to ensure the quality of cementing in the high temperature environment. Through the understanding and analysis of the strata in this area, this work provides valuable experience for drilling in the same strata in the future. The final hole depth of the M-1 well in Matouying is 4502. 11m, and hot dry rock with a temperature of 150t is found at 3965 m, which is the first hot dry rock well with a temperature of more than 150°C in the Beijing-Tianjin-Hebei region so far. © 2022 Editorial Board of Geology and Exploration. All rights reserved.